Bitwig

Taika-Kim · Post by **Taika-Kim** » Tue Jun 12, 2018 3:19 pm

Yes, the flexi. In the configuration dialog the CC is received, on channel 1. I can take new look at this, but I tried it already a few times. But it's of course possible the I also had some kind of misunderstanding.

LinuxDAW_Master · Post by **LinuxDAW_Master** » Wed Jun 13, 2018 1:38 am

I've tried the search function but I couldn't find any relevant results. Is the Launchpad Mini supported by this Bitwig extension ?

moss · Post by **moss** » Wed Jun 13, 2018 6:33 am

LinuxDAW_Master wrote:I've tried the search function but I couldn't find any relevant results. Is the Launchpad Mini supported by this Bitwig extension ?

Sorry, no. All supported controllers are listed here:
https://github.com/git-moss/DrivenByMoss/wiki

aMUSEd · Post by **aMUSEd** » Wed Jun 13, 2018 7:06 am

So does it need a controller that supports OSC?

moss · Post by **moss** » Wed Jun 13, 2018 7:36 am

aMUSEd wrote:So does it need a controller that supports OSC?

What?

aMUSEd · Post by **aMUSEd** » Wed Jun 13, 2018 8:19 am

Bitwig marks it as using OSC so I assumed that was how it communicates with DAWS

moss · Post by **moss** » Wed Jun 13, 2018 11:45 am

aMUSEd wrote:Bitwig marks it as using OSC so I assumed that was how it communicates with DAWS

Where do you see that? This OSC box is on my system only displayed if you use the OSC extension.

aMUSEd · Post by **aMUSEd** » Wed Jun 13, 2018 2:22 pm

moss wrote:
aMUSEd wrote:Bitwig marks it as using OSC so I assumed that was how it communicates with DAWS
Where do you see that? This OSC box is on my system only displayed if you use the OSC extension.

I see, that answers my question then, must be specific to certain controllers like Komplete Kontrol which is why I'm seeing it

moss · Post by **moss** » Wed Jun 13, 2018 2:40 pm

aMUSEd wrote:
moss wrote:
aMUSEd wrote:Bitwig marks it as using OSC so I assumed that was how it communicates with DAWS
Where do you see that? This OSC box is on my system only displayed if you use the OSC extension.
I see, that answers my question then, must be specific to certain controllers like Komplete Kontrol which is why I'm seeing it

Ah, yes. The Kontrol 2 has this weird architecture, I dont speak directly to the device instead NI runs this service in the background (that's why it does not work on Linux -> see me Tutorial video) and this communication is based on OSC.

aMUSEd · Post by **aMUSEd** » Wed Jun 13, 2018 2:50 pm

Thought so, that is consistent with how it works in Logic.

RunGuitarMan · Post by **RunGuitarMan** » Wed Jun 20, 2018 10:17 pm

AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.

moss wrote:This Bitwig Studio Extension supports several controllers at once:
[*]Novation Remote SL MkII

Get the latest stable release from: http://www.mossgrabers.de/Software/Bitwig/Bitwig.html (http://www.mossgrabers.de/Software/Bitwig/Bitwig.html)
Post all questions, wishes and discussion here.

Hi, bro. This extension is awesome! Can you give me older version of DrivenByMoss for Bitwig Studio 2.2.2?
I can't find it anywhere.

ablcstf · Post by **ablcstf** » Thu Jun 28, 2018 2:12 pm

AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.

Hey,

I have Beatstep with the firmware 1.2.0.3 and Bitwig 2.3 and can't make them work together: Bitwig continuously notifies that Beatstep crashed and jinxes up the playback so the whole package is just unusable. Need help here. Not sure if I've installed and configured this properly. I don't want to start blaming the DrivenByMoss before we've done some troubleshooting first.

I installed DrivenByMoss Bitwig extension as was instructed (downloaded from http://www.mossgrabers.de/Software/Bitwig/Bitwig.html (http://www.mossgrabers.de/Software/Bitwig/Bitwig.html)), loaded the Beatstep preset that came along with the extension with Arturia MIDI Control Center, changed the midi channel to 3 although the notation "Furthermore, in the Device Settings Tab set the User Midi Channel to 3" isn't clear to me. What do you mean? Is that instruction concerning some older UI of MIDI Control Center? There's no such tab with a label "Device Settings" that had a parameter "User Midi Channel" with numeric values.

moss · Post by **moss** » Fri Jun 29, 2018 6:52 am

ablcstf wrote: I have Beatstep with the firmware 1.2.0.3 and Bitwig 2.3 and can't make them work together: Bitwig continuously notifies that Beatstep crashed and jinxes up the playback so the whole package is just unusable. Need help here.

Please look up the error message in the Script Console and paste it here.

ablcstf wrote: extension with Arturia MIDI Control Center, changed the midi channel to 3 although the notation "Furthermore, in the Device Settings Tab set the User Midi Channel to 3" isn't clear to me.

That is only relevant to the Pro, I updated the Wiki accordingly.

gesslr · Post by **gesslr** » Sun Jul 15, 2018 1:58 pm

Hi. I have an installation question. Is this the place to post it?

First, I had this extension working like a charm under Mac OS Sierra for the longest time. Then I had a HD meltdown, corrupted back up, yada yada and I had to start with a clean OS install and reinstallation of everything. (A PIA but actually a very "cleansing" experience!

) The new OS is High Sierra.

I am trying to reinstall DrivenByMoss for the Push2 controller. I've installed the extension and the Push2 is set up and responds. Great. I'd like to use the display features provided in 'push2display'. I am having zero luck and as I said before I had this working like a top under Sierra. Things I've done so far:

- I have followed the installation instructions.

- I have installed and verified the latest java from the Oracle website (jre-8u171-macosx-x64.dmg).

- I've gone thru and made sure that various security permissions have been granted (including making sure that things under 'Security and Privacy>General' have been approved).

- I've even used sudo in terminal to allow 'Run.cmd' to work.

But I always get this message:

Georges-Mac-Pro:~ georgenapier$ /Volumes/Projects/Music/push2display/Run.cmd ; exit;
/Volumes/Projects/Music/push2display/Run.cmd: line 1: start: command not found
logout
Saving session...
...copying shared history...cp: /Users/georgenapier/.bash_history: Permission denied

...saving history...-bash: /Users/georgenapier/.bash_history: Permission denied
truncating history files...
...completed.

Has anyone run across this? Is there something I can do? I have not changed anything in the 'push2display' directory.

Thanks in Advance.

George

moss · Post by **moss** » Sun Jul 15, 2018 2:39 pm

gesslr wrote:Hi. I have an installation question. Is this the place to post it?

Perfect.

gesslr wrote: I've even used sudo in terminal to allow 'Run.cmd' to work.

You need to use "run.command" for Mac. "Run.cmd" is for Windows

Bitwig

KVR Audio

DrivenByMoss: Bitwig extension for many hardware controllers (version 23.2.1)