Bug reports
-
- KVRist
- 139 posts since 29 Apr, 2019
Windows 22H2
RC 4.6.3
I am in the idea tool and then open the chord voicing. I scroll to the top and it gets "stuck" and won't scroll back down. I have to open and close the master voicing track ("V" button) to get back.
Not a killer problem, but maybe worth a look.
RC 4.6.3
I am in the idea tool and then open the chord voicing. I scroll to the top and it gets "stuck" and won't scroll back down. I have to open and close the master voicing track ("V" button) to get back.
Not a killer problem, but maybe worth a look.
You do not have the required permissions to view the files attached to this post.
-
- KVRAF
- 1875 posts since 15 May, 2017
good catch.. any bug is to be looked at.. thanks..
-
- KVRist
- 139 posts since 29 Apr, 2019
Because Live midi is so bad, and loopMidi bussing does not understand PDC compensation....I'm trying out Reaper. I hit some immediate issues.
Windows 22H2
Reaper 6.79
RC 4.6.3
RC came up in very small high resolution. I went to settings to change magnification. I searched on "display" and "size" and noticed that the search text was not updating properly. Screen shot attached. Note in the attachment that the text is shown, that happens when I do a screenshot. But when typing the text is not shown. RC is somehow not getting 'redraw events'.
I then double clicked to run RC outside of the Reaper plugin UI container, then closed that to go back inside the container and it crashed. Attached is stack trace (which unfortunately has no symbols).
These are not "severity 1" bugs.
[Edit: I did not go into great detail because these are very easy to reproduce, at least for me. I tried a screen recording but it was too big.
Edit: I'm running "opengl" render driver. I tested "software" and now am on "default" render driver. Screen is ok, but input (as described) is still buggy.]
Windows 22H2
Reaper 6.79
RC 4.6.3
RC came up in very small high resolution. I went to settings to change magnification. I searched on "display" and "size" and noticed that the search text was not updating properly. Screen shot attached. Note in the attachment that the text is shown, that happens when I do a screenshot. But when typing the text is not shown. RC is somehow not getting 'redraw events'.
I then double clicked to run RC outside of the Reaper plugin UI container, then closed that to go back inside the container and it crashed. Attached is stack trace (which unfortunately has no symbols).
These are not "severity 1" bugs.
[Edit: I did not go into great detail because these are very easy to reproduce, at least for me. I tried a screen recording but it was too big.
Edit: I'm running "opengl" render driver. I tested "software" and now am on "default" render driver. Screen is ok, but input (as described) is still buggy.]
You do not have the required permissions to view the files attached to this post.
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5452 posts since 9 Jan, 2010
The solution is changing the render driver to other than direct3d11, e.g. direct3d (which is actually Direct3D9) or OpenGL. The same happens on my PC during text editing, but I am still not sure if the direct3d11 driver is buggy or I do something wrong or the SDL library has a bug.magmagwa wrote: ↑Thu May 11, 2023 12:51 pm RC came up in very small high resolution. I went to settings to change magnification. I searched on "display" and "size" and noticed that the search text was not updating properly. Screen shot attached. Note in the attachment that the text is shown, that happens when I do a screenshot. But when typing the text is not shown. RC is somehow not getting 'redraw events'.
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
Summer Sale - 40% off - June 3-18
Home of RapidComposer, Melodya, MIDI Mutator and Syne
Summer Sale - 40% off - June 3-18
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5452 posts since 9 Jan, 2010
I replied too soon. The same happens on my PC even with 'software' rendering.
All the other text editing boxes work well, e.g. under Settings / Locations, or the track title entry. I'll check this bug.
EDIT: I chose "Window float selected FX", then closed the window, but it did not crash with the beta version.
Thanks,
Attila
All the other text editing boxes work well, e.g. under Settings / Locations, or the track title entry. I'll check this bug.
Where exactly did you double-click in REAPER? I would love to reproduce this.I then double clicked to run RC outside of the Reaper plugin UI container, then closed that to go back inside the container and it crashed.
EDIT: I chose "Window float selected FX", then closed the window, but it did not crash with the beta version.
Thanks,
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
Summer Sale - 40% off - June 3-18
Home of RapidComposer, Melodya, MIDI Mutator and Syne
Summer Sale - 40% off - June 3-18
-
- KVRist
- 139 posts since 29 Apr, 2019
I had selected default, which selected Direct3d but that gave problems.musicdevelopments wrote: ↑Fri May 12, 2023 4:10 pmThe solution is changing the render driver to other than direct3d11, e.g. direct3d (which is actually Direct3D9) or OpenGL. The same happens on my PC during text editing, but I am still not sure if the direct3d11 driver is buggy or I do something wrong or the SDL library has a bug.magmagwa wrote: ↑Thu May 11, 2023 12:51 pm RC came up in very small high resolution. I went to settings to change magnification. I searched on "display" and "size" and noticed that the search text was not updating properly. Screen shot attached. Note in the attachment that the text is shown, that happens when I do a screenshot. But when typing the text is not shown. RC is somehow not getting 'redraw events'.
I selected OpenGL and this is better!
-
- KVRist
- 139 posts since 29 Apr, 2019
I double click right on the "VST3i: RapidComposer..." line.musicdevelopments wrote: ↑Fri May 12, 2023 4:19 pm I replied too soon. The same happens on my PC even with 'software' rendering.
All the other text editing boxes work well, e.g. under Settings / Locations, or the track title entry. I'll check this bug.
Where exactly did you double-click in REAPER? I would love to reproduce this.I then double clicked to run RC outside of the Reaper plugin UI container, then closed that to go back inside the container and it crashed.
EDIT: I chose "Window float selected FX", then closed the window, but it did not crash with the beta version.
Thanks,
Attila
You do not have the required permissions to view the files attached to this post.
-
- KVRist
- 139 posts since 29 Apr, 2019
RC takes a long time, 30 seconds, to start when I insert it as a plugin for Reaper. It also seems to take a long time to exit. I think I have provoked some crashes by start/stop too quickly, it seems there is some exit/cleanup ongoing and a fast restart seems to cause a race condition of some sort. This is not entirely reproducible, but I thought it may provide a clue. Attached is what appears to be a somewhat useless windows stack trace, let me know if it's of any use. Not sure if you can release with symbols so that the stack trace is readable.
You do not have the required permissions to view the files attached to this post.
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5452 posts since 9 Jan, 2010
First the good news: I managed to fix the text editor redraw bug, and found a crashing bug when closing the plug-in window (also because of the text editor fields).
I don't understand why it takes such a long time to load the RC plug-in. This is unusual.
On my old Windows 10 PC the VST3 is loaded in REAPER in about 4 seconds.
On a mac Mini M1 loading RC VST3 into REAPER takes about 1 second. Having lots of custom phrases should not affect this time because that happens in the background.
The plug-in should wait for a successful startup before it can be unloaded.
Thanks for being so helpful!
Attila
I don't understand why it takes such a long time to load the RC plug-in. This is unusual.
On my old Windows 10 PC the VST3 is loaded in REAPER in about 4 seconds.
On a mac Mini M1 loading RC VST3 into REAPER takes about 1 second. Having lots of custom phrases should not affect this time because that happens in the background.
The plug-in should wait for a successful startup before it can be unloaded.
Thanks for being so helpful!
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
Summer Sale - 40% off - June 3-18
Home of RapidComposer, Melodya, MIDI Mutator and Syne
Summer Sale - 40% off - June 3-18
-
- KVRAF
- 1875 posts since 15 May, 2017
Takes me about 2.5 secs appx to load in Reaper, almost immediately to unload.. Reaper 6.79, but, using latest beta build of RC..
-
- KVRist
- 139 posts since 29 Apr, 2019
Hey guys, I removed the Documents\RapidComposer directory, uninstalled and reinstalled RC. It now starts in a flash.
On the problematic process I did a "process monitor" trace of RC, interesting. This is like strace on linux or truss if you go way back .
I can share the process trace and/or the saved "Documents\RapidComposer" directory if you want.
Trace file is 3M, RapidComposer directory 45M.
I can share through google drive.
Let me know if interested.
Thanks
On the problematic process I did a "process monitor" trace of RC, interesting. This is like strace on linux or truss if you go way back .
I can share the process trace and/or the saved "Documents\RapidComposer" directory if you want.
Trace file is 3M, RapidComposer directory 45M.
I can share through google drive.
Let me know if interested.
Thanks
-
- KVRist
- 139 posts since 29 Apr, 2019
I'm just documenting this for the purpose of forensics.
I reinstalled RC from scratch, removed Documents\Rapid Composer directory and now startup is fast.
a) I started Reaper, started RC, and the Ctl-X, Del key were not being received/processed by RC. I had the Reaper "send all keyboard input to the plugin" enabled.
b) I started RC standalone, the keys worked fine.
c) I then started RC within Reaper and the keys worked again (!!).
I had tested OpenGL and Direct3D in the plugin testing for Ctl-X and it failed for both.
Anyway, it seems starting it standalone has provided some relief for the moment.
I reinstalled RC from scratch, removed Documents\Rapid Composer directory and now startup is fast.
a) I started Reaper, started RC, and the Ctl-X, Del key were not being received/processed by RC. I had the Reaper "send all keyboard input to the plugin" enabled.
b) I started RC standalone, the keys worked fine.
c) I then started RC within Reaper and the keys worked again (!!).
I had tested OpenGL and Direct3D in the plugin testing for Ctl-X and it failed for both.
Anyway, it seems starting it standalone has provided some relief for the moment.
-
- KVRAF
- 1875 posts since 15 May, 2017
Just so you know, if RC crashes you should at some point do a reboot. When it does, it won't unload properly and kind of stick around in memory. It is always best to start fresh.. If it continues to crash, of course please report it..
-
- KVRer
- 4 posts since 14 May, 2023
Hello,
Recently, I have been using the demo version of RC, and I have come across some really great features. However, I have noticed that when I apply rhythm to any MIDI file or convert it to a generator, I instantly lose the velocity. This is very disappointing, especially since I'm importing piano pieces from classical music that have unique and expressive velocities.
I'm wondering if you could provide some insight into whether this is a limitation of the demo version or if there's something I can do to maintain the original velocity when applying rhythm to MIDI files. I would like to know if this is standard practice, and if there are any workarounds available. I'm considering purchasing the full version, but I'd like to resolve this issue first.
Moreover, I would appreciate any tips or best practices for using RC's rhythm feature, especially when applying it to classical piano pieces. As a beginner with the software, I want to ensure I'm using it to its fullest potential.
Additionally, I noticed that this issue does not seem to happen in MIDI Mutator. Could you please clarify if there's anything wrong or if I'm making any mistakes while using the software?
I appreciate any help and advice you can provide.
Bob
Recently, I have been using the demo version of RC, and I have come across some really great features. However, I have noticed that when I apply rhythm to any MIDI file or convert it to a generator, I instantly lose the velocity. This is very disappointing, especially since I'm importing piano pieces from classical music that have unique and expressive velocities.
I'm wondering if you could provide some insight into whether this is a limitation of the demo version or if there's something I can do to maintain the original velocity when applying rhythm to MIDI files. I would like to know if this is standard practice, and if there are any workarounds available. I'm considering purchasing the full version, but I'd like to resolve this issue first.
Moreover, I would appreciate any tips or best practices for using RC's rhythm feature, especially when applying it to classical piano pieces. As a beginner with the software, I want to ensure I'm using it to its fullest potential.
Additionally, I noticed that this issue does not seem to happen in MIDI Mutator. Could you please clarify if there's anything wrong or if I'm making any mistakes while using the software?
I appreciate any help and advice you can provide.
Bob
-
- KVRist
- 139 posts since 29 Apr, 2019
I know on windows people do like to reboot. However, memory for an exiting process will be cleaned up. When the process is restarted, new memory is allocated. Unless the process is allocating it's own persistent shared memory and then reattaching to it on startup. This seems quite unlikely for RC but would be a bug if it's not cleaning it up properly. If RC is keeping around lock files or state files, that could also cause state issues.
It's really up to RC developers to know if there is state across instantiations.
I definitely hesitate on the "reboot" to fix problems since it changes so many variables.
All this beind said, I do reboot as a last resort/test because "you never know".