AnimaSpat 5 Plus is a 5.1 surround module with modulations of the spatial positions.... [more]

Description: Transformation of a stereo signal into 5.1 surround format.Division of the two audio inputs by three crossover filters, plus a low pass. Routing of the eight resulting filter bands on six outputs. Independent levels and mix control.... [more]

Description: Division of the two audio inputs by six crossover filters. Spatial position of the eight resulting filter bands inside an octophonic space. Independent levels control. Can be used in 5.0, 6.0, 7.0 and 8.0 mode.... [more]

Description: 2 x 8 superimposed MIDI joysticks.Inertia parameter.Global change of all the positions by a MIDI keyboard with transitions.Can control up to 16 SpatSurround modules for easy spatialization of 16 sounds together. Can be used with all effects plugins for "morphing" parameter changes.... [more]

Description:Records from three to eight stereo synchronized wave files, for surround and multi-channel recording. The extension numbers are automatically added to the files. Especially made for Audiomulch, Console and EnergyXT. 16 bits only.... [more]

OctoMag is an eight stereo wave file player which can play independently or synchronized.Features: Visual setting of the start and end points for each player.Loop mode. Manual scrubbing. Separated pitch control. No time limit. 24 bits support.Global rewind and play.... [more]

Octophonic gestual (?) pitch and speed variation from four audio files or by grabbing the audio input in realtime.... [more]

Features: Supports 16 and 24 bits wave files. Granular time-stretching, with high values range allows from timbral to slicing effects. Pitch and tune setting for the eight segments. Bi-dimensional controller to control the speed and segments size. Three modulators with complex waveforms and "morphing" that can control the speed, the size of the segments, the pitch, the spatial position parameters or another modulator. Independent spatial position of the eight segments inside a eight speakers surface, free arrangement. Spatial area settings for each segment plus a global setting.... [more]

Pentaphonizer offers stereo to five-channel-surround translation. Features Cinetic section: Analysis of the main frequency (pitch tracker) and the intensity (volume tracker) of the two channels of a stereo input signal. Modulation of the X/Y position of the two inputs according to the analyzed signal : center position, amplitude of the movement and smoothness. Each channel tracker can control the X or Y position of the two inputs. Spatial areas settings for each output. Spectral section: Division of the two inputs signals in four frequency bands with three crossover filters. Each freq... [more]

Spatialization plug-in which is able to process two inputs to sixteen outputs inside a 3D space. Separate control for the left and right inputs with possibility to link left and right with various symmetry controllable in real time. The sixteen loudspeakers can be freely positioned. Full automation inside hosts.... [more]

5.1 plugin especially made for Zynewave's Podium. It chains a surround module similar to the SpatPod 5.1 plus a six channel multimode filter (separate control for the LFE), a five channel delay/pitch and a five channel reverb. It can work in all software that support multi-channel connections (Nuendo, Cubase and modular).... [more]

Features: Sixteen independent delay lines*. Graphic setup of time and feedback values. Three acceleration curves. Individual mutes. Global time and feedback settings. Time modulation oscillator with 15 waveforms, with inertia value for smooth textures. Six slots for graphic "snapshots" (4 for times and 2 for feedbacks). Bi-dimensional control surface for easy recall of the snapshots and "morphing" between them, with 10 interpolation curves and inertia setting. Individual spatial position of the 16 delays inside a 2D space. Free arrangement of 7 speakers, compatible... [more]

Octophonic granulator with 8 outputs surround spatialization of each grain.... [more]

SpatHarmo 8 is an Octophonic harmonizer.Features: Eight separate pith shifters. Four octave pitch shift. Free position of the speakers. Free spatial position of each pitch shifter inside the octophonic space. External audio input or integrated wave player with pitch control. Stereo compatible when putting the sounds inside only two speakers. Inertia parameter for smooth variations. Change of the configuration by a MIDI keyboard with transition duration for slow evolutions (may take a lot of CPU!).... [more]

SpatKeyboard 212 allows you to set of the levels / routing of two inputs to twelve outputs by twelve MIDI notes.Features: Each note triggers an envelope with velocity rate and volume aftertouch support. The global rate of the twelve envelopes can also be controlled by the modulation wheel. It can be used for spatial sound control, or for dynamic routing between other plugins in a modular host (works inside Podium, Nuendo and modular software).... [more]

SpatKeyboard 616 allows you to set the levels / routing of six inputs to sixteen outputs using a MIDI keyboard.Features:Each input can be set to one to sixteen outputs. Volume control for each input. Visual feedback of the activity of each output. The duration of the transitions between notes can be controlled by the modulation wheel. It can be used for spatialization of 5.1 surround files or complex routings between other plugins. ... [more]

Spatialization plugin which is made for mixing 8 to 12 channels files in 5.1 surround format. Separate control for the LFE and simple reverberation on front channels.... [more]

SpatPod 5.1 is a 5.1 surround plugin especially made for Zynewave's Podium. It may also be used inside Cubase SX and Nuendo 2 where it will replace and improve their standard module thanks to its separate control for the left and right inputs with the possibility to link left and right with various symmetry modes controllable in real time.... [more]

Features: Mono-timbral polyphonic sampler with spatial control on 16 outputs in a 3D space. Free position of each loudspeaker. Loop modulations. Analysis of the frequency and the amplitude for modulating the sampler parameters and the spatial position. Modulation of the spatial position by all LFO and ENV. ... [more]

Spatialization plugin which is able to process two inputs to sixteen outputs inside a 3D space. Separate control for the left and right inputs with possibility to link left and right with various symmetry controls in real time. The sixteen loudspeakers can be freely positioned. The movements of the sources can be animated in several ways: Record : the movement can be recorded in realtime and replayed with transformations. Steps : sixteen 3D steps path, with manual, timed or cyclic control. Curves : three modulators are combined for creating realtime evolving 3D curves. Amplitude and frequenc... [more]

Spatialization plugin which is able to process formats from quad to twelve channels, including 5.1 and 7.1 surround. Separate control for the left and right inputs with possibility to link left and right with various symmetry modes controllable in real time. The twelve loudspeakers can be freely positioned inside 2D space. Works inside Nuendo 2, Podium, Cubase SX 2 and modular software.... [more]

SpatSurround 1X is a 5.1 Surround Module. Features: One input to six outputs. Global setting of area. Low cut filter and separate level for the LFE channel. Visual indicator of the level for each speaker. ... [more]

SpatSurround 2X is a 5.1 Surround Module. Features: Two inputs to six outputs. Separate position control for each voice. Global setting of area. Low cut filter and separate level for the LFE channel. Visual indicator of the level for each speaker. ... [more]

SpatSurround 5M provides automatic spatial modulation of two inputs in 5.1 surround mode, a kind of five channels "super-autopan". The speed and shapes of X and Y axis curves can be set independently for non symmetrical complex modulations, and a third modulator allows to make evolving trajectories. The global movements can also be freely moved and scaled. Like in the other AcousModules, the left and right input channels can be linked in several ways for true stereo spatialization, and the distance factor can be set for each speaker and channel. Work inside Podium, Cubase SX, Nuen... [more]

SpatSurround 7.1 is a 7.1 Surround Module. Features: Stereo input with separate position control of the two voices. Free position of the seven channels/speakers. Independent position control of the left and right inputs. Linking of the right channel to the left, with X, Y shift and mirror, all automatable. Separate area setting for each input/output channel plus a global adjustment factor. Precise numerical values of intensity control for each output. Separate level and filter frequency cutoff setting for the LFE channel. MIDI Learn function. Direct standard joystick compatibility. ... [more]

Subtractive synth: 2 oscillators 1 multimode resonant filter 3 LFOs 2 envelopes Frequency modulation and synchro between the two oscillators 8 modulated outputs with gestual control of the most important parameters associated with spatial movements. 10 notes polyphony. ... [more]

SpatTest 5.1 is a test signal generator for 5.1 surround configurations.Features: Choice of waveform signal. Frequency from 20 to 2000 Hz. Can play .WAVs.... [more]

Octophonic reverberation with 8 inputs / outputs, separate parameters for each channel.... [more]

Surroundizer offers stereo to surround translation. Common features: Activation and free 2D position of up to eight loudspeakers, compatible with all surround settings from 4.0 to 7.1, including true octophony (8.0). Mono or stereo input. Graphic 2D representation space. Connexions according to the ITU/SMPTE standard. Separated levels for each output channel. Variable mix of the three sections plus the reverberation. Individual spatial areas and amplitude curves for each section. Three spatialization sections: Cinetic, Spectral and "LCRS". Cinetic section: Analysis of th... [more]