(Update 10/03/19) Phonec v2.4 Update
- MPE support
- New Vox + Funk waveforms
- Creamy New Filter
- New Filter Melt option
- New Noise Crusher
- Better sync between Arp + Seq
- Preset + Bank options now separated; easier to access
- Preset sub folders now supported
- Newly designed template presets included
- Added Contour shapes for Mod Envelopes
- Added HFO Rate to Aftertouch/Modwheel
- Tooltip popup improvements
- Windows 10 compatability fix
(Update 12/29/17) Phonec v2.3 Update
- New Melt System with HFO integration
- New Filter variations + a new Acid Filter
- Filter Saturation Driver
- Highpass Filter Tracking
- Randomizers are now MIDI assignable
- Oscillator Harmonics Reduction
- Dotted note echoes
- EchoShifter timing has been improved
- All LFOs now start with the same phase on host play.
- Arp Hold can also function as note hold
- Sub-Presets for key sections
- Improved Patch Management
- Load/Save MIDI cc maps
- Note Memory Mode can be turned off
- Lots of bug fixes and improvements
(Update 11/29/16) Phonec v2.2 Update
- New Chorus effect with Melt functionality
- New 3-band Parametric EQ
- New Pan-tracking
- New waveforms: Bell and Ramp
- New LFO target: Logic
- New Mod Envelope targets: Logic, Osc1/2/Sub/Noise Levels
- New Arp and Seq timings and 1/2 switches
- Improved slider/knob sensitivity
- Fixed: Clipping noise with Echoshifter
- Windows: Banks folder now installs into Public/Documents
**You will need to copy any user banks into the new location.
(Update 8/2/16) Phonec v2.1 Update
- New and improved GUI
- Improved filter
- 12/24db LPF option
- 3-stage LPF switch
- Filter separation of 3rd stage
- HPF resonance switch
- Improved resonance response
- Gain can now be pre/post filter
- Gain clipping improvements
- Filter can now follow amp envelope
- New copy/paste functions on Oscillator and FIlter sections
- New Logic control for And/Or/Xor modes for fine-tuning logic switching point
- Modwheel can now follow Aftertouch controls
- New Pitchbend Range selector
- New randomization switch for internal Melt settings
- Volume set lower on default patchbank
- New INIT patchbank to call up 128 initialized patches
Phonec 2 has been released!
Phonec2 is the successor to the original Phonec synthesizer, which was inspired by the mystique of video logos you hear at the beginning of worn out VHS tapes. This time around it's available for both Mac and PC as a 32/64 bit VST and Audio Units plugin.
Phonec2 has all the great features of the original plus many new features and several improvments. Phonec2 is capable of producing a wide range of sounds such as vintage analogue tones, lo-fi synthscapes, ethereal pads, minimal techno sequences, retro synthwave leads and hard hitting synth basses. Phonec2 has an intuitive GUI that attempts to strike a balance between form and function, making it a very usable tool that can be a real inspiration to work with. Apart from it's unique character and excellent work flow, Phonec2 has several interesting features that set it apart from the crowd.
What's new?
Phonec2 has many exciting new features that make it better than ever. For starters, there's plenty of improvements in the overall signal flow. From the oscillators to the Echoshifter and everything that gets Melted in between, each section has been reworked to create the best Phonec experience yet.
Aftertouch is one feature that has been requested by some of the most dedicated Phonec users. This was originally going to be applied to only a couple of parameters like Melt and Filter, but I decided to go all out and make a new Mod panel devoted entirely to aftertouch, with control of nine different parameters, making Phonec more expressive than ever before.
Patch randomization has also been included, but not just to blatantly randomize every control at one time. Phonec2 has randomization switches for specific sections that were well planned out, giving you a little common sense chaos where it can be most useful.
Each control now has the ability to be assigned to a midi controller by simply right-clicking on it. You'll also notice that the controls are much smoother and seem to glide into position.
The sequencer has been greatly improved, with a modulation grid for the Filter/Amp and Copy/Paste controls for storing your patterns and pasting them into other patches. There have also been improvements in the way the sequencer responds to note triggering, with super solid timing.
If you thought the Echoshifter was an interesting effect before, get ready for this new incarnation. High and Low pass filters have been added into the feedback path for creating sweeping delays and tape delay dub sounds. But to make this even more unique is the Shifter being added into the feedback path as well. Crank the feedback up and adjust the shifter and you can get endless insanity. And for even more fun, tweak the Phase control for crazy phase shifting sounds. Best of all, Phonec likes to share. You can run your favorite synths or any other external input straight into the Echoshifter. And of course, external signals can still pass through the Melt effect as well.
And finally, perhaps one of the more convenient of all the new features is the updated patch management system, where you can load/save banks and copy/paste patches right from the interface.
Have a listen to this track where Phonec is the only synth used:
https://soundcloud.com/phonogeist/past-tense
Specs:
Dual Oscillators that can be combined in unique ways
Sub Oscillator for beefing up the low end
Analog-style oscillator drifting
2-stage lowpass filter plus 1-pole highpass
Melt: A unique feature that adds instant character to any patch
Arpeggiator (synced to host)
Modulation Sequencer
3 LFOs (2 monophonic, 1 polyphonic)
HFO (High Frequency Oscillator)
2 Modulation Envelopes
Aftertouch control of several parameters
Echoshifter: Pitchshifting Dub Delay Unit
External Audio Processing
MIDI Learn and automation of any parameter
Patch Randomization
Double Click Parameter Reset
Intuitive patch managment system
Default bank of 128 patches
Try out the demo or purchase your copy here.
