KVR Audio

Guenon · Post by **Guenon** » Mon Dec 04, 2017 7:14 pm

Not sure whether I'll enter this, but I'm sure some of you will find this literal one synth exercise entertaining

Lab of 1968, with

1 instance of FB-3100
1 EQ
1 Compressor
1 Delay
1 Reverb (Orilriver)
1 OTT
2 Limiters (1 before and after fx)

Crafted in Ableton Live 8

jasinski · Post by **jasinski** » Mon Dec 04, 2017 7:22 pm

@Full Bucket
Thanks for the quick responses here!
One observation re: the 3100's external input. I'm using Ableton Live on a Macbook Pro.
•I can route the audio from one track to the input of the 3100's track.
•The AU FB3100 plug in receives the external input correctly and passes it through (i can hear it and apply the filter and modulation to the signal).
•The VST FB3100 plug in does not pass the audio through with the exact same parameters set up.
•The AU version resets the Resonators parameters every time the play back is stopped.
•The VST version Resonators behave as expected (parameters are not reset).

jasinski · Post by **jasinski** » Mon Dec 04, 2017 7:29 pm

Guenon wrote:Not sure whether I'll enter this, but I'm sure some of you will find this literal one synth exercise entertaining

Lab of 1968, with
version=3&vq=hd720

That was DOPE @Guenon. Hat's off.

Guenon · Post by **Guenon** » Mon Dec 04, 2017 7:36 pm

Thanks

Local Man · Post by **Local Man** » Mon Dec 04, 2017 7:39 pm

Guenon wrote:Not sure whether I'll enter this, but I'm sure some of you will find this literal one synth exercise entertaining

Lab of 1968, with

1 instance of FB-3100
1 EQ
1 Compressor
1 Delay
1 Reverb (Orilriver)
1 OTT
2 Limiters (1 before and after fx)

Crafted in Ableton Live 8

That was absolutely amazing! Maybe my favorite thing I have ever heard on this challenge and I've only listened on my phone so far.

Local Man · Post by **Local Man** » Mon Dec 04, 2017 7:45 pm

I was using the FB-3300 and had something weird happen. I would be programming a patch and it would sound one way, and then I would go to record something with it and the sound would change in some major ways. All of the settings would look the same but it would sound completely different. This even happened with the presets! Does anyone have any insight as to why this would happen or has this happened to anyone else? I'm using Logic Pro (10.2.4) on Mac Yosemite by the way.

Taron · Post by **Taron** » Mon Dec 04, 2017 7:52 pm

Guenon wrote:Not sure whether I'll enter this, but I'm sure some of you will find this literal one synth exercise entertaining

Lab of 1968, with

1 instance of FB-3100
1 EQ
1 Compressor
1 Delay
1 Reverb (Orilriver)
1 OTT
2 Limiters (1 before and after fx)

Crafted in Ableton Live 8

You know, you should get a special price for this one, but I'm saying it out loud right now. What ever may happen, I guarantee you my 5 points! I respect and love it!

Taron · Post by **Taron** » Mon Dec 04, 2017 7:53 pm

AH, shit...what? Danged, you guys must've posted this while I was listening to Guenon's masterpiece right there.

...well, well deserved praise and you'll face more praise still, I'm sure!

Guenon · Post by **Guenon** » Mon Dec 04, 2017 8:01 pm

Thank you very much, everyone

... Ok, I'll remember to post it also on Soundcloud and enter it in time, heh.

ontrackp · Post by **ontrackp** » Mon Dec 04, 2017 8:36 pm

Local Man wrote:I was using the FB-3300 and had something weird happen. I would be programming a patch and it would sound one way, and then I would go to record something with it and the sound would change in some major ways. All of the settings would look the same but it would sound completely different. This even happened with the presets! Does anyone have any insight as to why this would happen or has this happened to anyone else? I'm using Logic Pro (10.2.4) on Mac Yosemite by the way.

This is the same problem that Jasinski reported re: the Resonators and I experienced with the MG. It plays fine as it's programmed and saves properly, but in the AU version (which I have to use in Logic, too) when you stop and start again the Resonators and MG seem to lose their settings.

Jasinski says the Resonator problem does not occur in the VST version, I'll be testing the VST for the MG issue in the next day or two.

Local Man · Post by **Local Man** » Mon Dec 04, 2017 8:45 pm

ontrackp wrote:
Local Man wrote:I was using the FB-3300 and had something weird happen. I would be programming a patch and it would sound one way, and then I would go to record something with it and the sound would change in some major ways. All of the settings would look the same but it would sound completely different. This even happened with the presets! Does anyone have any insight as to why this would happen or has this happened to anyone else? I'm using Logic Pro (10.2.4) on Mac Yosemite by the way.
This is the same problem that Jasinski reported re: the Resonators and I experienced with the MG. It plays fine as it's programmed and saves properly, but in the AU version (which I have to use in Logic, too) when you stop and start again the Resonators and MG seem to lose their settings.

Jasinski says the Resonator problem does not occur in the VST version, I'll be testing the VST for the MG issue in the next day or two.

Thanks for response. Yes, that must be it. I knew I should've read through thread but from a quick skim I hadn't seen that.

z.prime · Post by **z.prime** » Mon Dec 04, 2017 8:48 pm

Guenon wrote:Not sure whether I'll enter this, but I'm sure some of you will find this literal one synth exercise entertaining

Lab of 1968, with

1 instance of FB-3100
1 EQ
1 Compressor
1 Delay
1 Reverb (Orilriver)
1 OTT
2 Limiters (1 before and after fx)

Crafted in Ableton Live 8

What the actual f#$*? Just amazing. Amazing.

Taron · Post by **Taron** » Mon Dec 04, 2017 8:55 pm

z.prime wrote:
Guenon wrote:Not sure whether I'll enter this
What the actual f#$*? Just amazing. Amazing.

That's what I'm saying! Guenon is on fire lately. Especially with the videos. I checked into his channel and then saw his 105 video... freaking incredible. He's on f#%*ing fire!

(indeed)

z.prime · Post by **z.prime** » Mon Dec 04, 2017 8:57 pm

Guenon's always been on fire. God mode was activated well before he first submitted an OSC track. Many, many years ago.

(I didn't notice this because my stalking drone has been inactive for a few days. I think he found it and destroyed it...)

Taron · Post by **Taron** » Mon Dec 04, 2017 9:17 pm

Come to think of it, you're right. But somehow....it's probably the videos! Just awesome!

One Synth Challenge #106: FB-3100/3200/3300 by Full Bucket Music (Jasinski Wins!)