CC control - one of the last things to be done, when anything is inside etc.werd wrote:Fortune wrote:
suggestions for possible features
CC control
S/H or Rnd of Pitch
Sorry.. I have much problems at reading english..Fortune wrote:well, bugs fixed within the accent system. The accent is 'hardwired' i.e. connected to the resp. steps. (anyway I've to look for some means to suppress incidental double beat on start ... which might lead to the impression the accent is not on spot - simply follow the LED to check.)debby wrote: Hi..HG .. I have to sleep now..
mode 2 is some wrong.. If level is 1(normal),2,3,4
mode 1 was 4121,3121 (4232 = A2B4)
so mode 2 have to 2141,2141 (2424 = 1A3A)
so at double temp, hat can be xx4x,xx4x
cheers
HG
ok, I'll look into that MIDI issuedebby wrote:
Sorry.. I have much problems at reading english..
Anyway.. your mode 2 is not bad..
It seems 1214,1214. yes.. It's off beat.
But, 2141,2141 also can be useful at snare beat or hat beat at normal beat not double beat. and at double beat It can be 16step machine.
Anyway.. I'am not care, Important is proper mode at your style.
and midi is possible now..
But, midi seems some bug.. It sounds twice when note on and off. and at some case, It seems such as long decay delay sound(also twice sound)
No..Fortune wrote: ok, I'll look into that MIDI issue
as of the accent patterns:
the pattern are like this for 8 beats:
Mode 1 = AnBnCnBn
Mode 2 = nBnCnBnA
where A=100%, B=70%, C=85%, and n=60% of level (approx.)
am I right you would like to have
Mode 1a = AnCnAnCn or AnBnAnBn ?
resp. Mode 2a = nCnAnCnA or nBnAnBnA
cheers
HG
ok, done and two more accent patterndebby wrote:
Mode 3 = BnAnBnAn - 2141,2141 - xx4x,xx4x
This mode is double beat hi-hat mode.
There is all 4 Bar at synth, and 1+1 = 2 bar can be 16 step machine
Mode 3 = xxAx,xxAx,xxAx,xxAx = hat
Mode 1 = Axxx,Cxxx,Axxx,CxBx = kick (4 bite)
Mode 1 = xxxx,Cxxx,xxxx,Cxxx = Snare
and at Normal beat
Mode 3 = xxAx,xxAx = Snare
Mode 1 = AxBx,CxBn = kick (4 bite)
Mode 3 = xnxn,xnxn = Hat
and, Normal beat is down beat(2 bite) in fact
So, double beat is just uptempo (right? some headache)
Mode 2 = nBnCnBnA is off beat at down beat
It seems good at down beat with Mode 1
But, I don't care,, I don't know, I want Fortune's style
If you are good, I am good too..
as this accent patterns for suredebby wrote:4 = AnnnB2BB2C - rising type
5 = ACB2BnBB2C - falling and rising
Is it Fortune beat?
these are neat not only for some percussion things 
I'll have a look whether rising and falling will be useful too. 55% is already too low in volume - I did quite a lot of checks on this in getting the best sounding settings.debby wrote: A=100 C=85 B=70 n=60? 70-15=55?
Hi Fortune.. n=60 is proper at mode1 and 3 too.Fortune wrote:
thanks for that. had to add a switch to set the sequencer gates to off at stop mode as the double trig had been caused by a still open gate from the seq.debby wrote: Hi Fortune.. n=60 is proper at mode1 and 3 too.
But, midi or trig sound has some error still at savi host.
It doesn't error at first time, but after stop/play, Host control on/off, Hostsync on off.. then.. there is sound error..
Try Host control on/off, and then.. kick or hat trig sound has double sound
well, probably in two weeks.Flux Cobalt wrote:I am very interested in the Percumat 2. How long will it be before it is finished?
now you can say soS-N-S wrote:this is the best GUI i have ever seen for one of your plugs,really loving it
Submit: News, Plugins, Hosts & Apps | Advertise @ KVR | Developer Account | About KVR / Contact Us | Privacy Statement
© KVR Audio, Inc. 2000-2026
