now it works. thank you. cool fx.
greetZ ANdreas
Free pluggos for Mac ppl
-
- KVRian
- 822 posts since 19 Mar, 2001 from berlin / germany
-
- KVRian
- Topic Starter
- 868 posts since 7 May, 2002 from Sydney, Australia
Good that u got it working 
-
- KVRian
- Topic Starter
- 868 posts since 7 May, 2002 from Sydney, Australia
OK Macfolk, my favourite distortion/limiter has just been ported to OSX Pluggo : jk's Limofive
I unreservedly LOVE this distortion, you can adjust distortion/limiter threshold levels over five frequency bands. and (new in the OSX version) adjust the crossover points of those bands.
Click here to get it .
See my previous posts on how to set up free Pluggo Runtime so u can run this as an RTAS, VST or AU plug-in.
Jack's description :
" All number boxes can be drag up/down, or click-type in digits-enter.
"Attack" , "release" time (ms), "threshold all" and "makup all" (db) are self explaining. "Soft" is a ratio between compression (100% soft) and digital clipping (0% soft). Threshold and makeup gain can be adjusted for all bands independently (drag up/down digits below band display). "Threshold all" and "makeup all" reset all bands settings to slider value. Finally "volume" sets output gain and maximum peak. Note, that output peak meter uses linear scale with -6db in its half (for better view). Bands crossovers can be set dragging frequency boxes (above band bar). "
Enjoy it!
I unreservedly LOVE this distortion, you can adjust distortion/limiter threshold levels over five frequency bands. and (new in the OSX version) adjust the crossover points of those bands.
Click here to get it .
See my previous posts on how to set up free Pluggo Runtime so u can run this as an RTAS, VST or AU plug-in.
Jack's description :
" All number boxes can be drag up/down, or click-type in digits-enter.
"Attack" , "release" time (ms), "threshold all" and "makup all" (db) are self explaining. "Soft" is a ratio between compression (100% soft) and digital clipping (0% soft). Threshold and makeup gain can be adjusted for all bands independently (drag up/down digits below band display). "Threshold all" and "makeup all" reset all bands settings to slider value. Finally "volume" sets output gain and maximum peak. Note, that output peak meter uses linear scale with -6db in its half (for better view). Bands crossovers can be set dragging frequency boxes (above band bar). "
Enjoy it!
-
- KVRian
- Topic Starter
- 868 posts since 7 May, 2002 from Sydney, Australia
New one ... very cool ...
jk's 4-band PHILTER v0.1 available from here
" Click on any filter (1-4) panel body or drag its any knob/number to select it ( will highlite). Graphic display will show its slope region (light blue) when selected. You can drag it left/right (freq), up/down (gain). When dragged on the edge it's rather Q (left/right) and gain (up/down). Any time pressing "FLAT" destroys your work. Right fader is an output gain (+/- 24 dB)."
See earlier in this thread on how to set up (free) Pluggo Runtime so you can run this as AU / VST / RTAS.
jk's 4-band PHILTER v0.1 available from here
" Click on any filter (1-4) panel body or drag its any knob/number to select it ( will highlite). Graphic display will show its slope region (light blue) when selected. You can drag it left/right (freq), up/down (gain). When dragged on the edge it's rather Q (left/right) and gain (up/down). Any time pressing "FLAT" destroys your work. Right fader is an output gain (+/- 24 dB)."
See earlier in this thread on how to set up (free) Pluggo Runtime so you can run this as AU / VST / RTAS.
-
- KVRian
- Topic Starter
- 868 posts since 7 May, 2002 from Sydney, Australia
Five OSX pluggos from The Lone Roger's site – two free ones and three that require some shareware components.
See posts above about how to install (free) Pluggo Runtime so you can run these as AU, VST or RTAS plugs.
these are all very cool, by the way, glad to see them on OSX
***********************************************************
"For that oh-so-trendy bouncing delay, what sir needs is CURVER Actually, this is probably a bit different from what you were expecting."
***********************************************************
FREEVERB
"Simply a shell for Olaf Mathes freeverb~ object, a nice sounding reverb with a neat 'freeze' feature. The OS X version also has some nifty gating features."
***********************************************************
The next THREE aren’t strictly free as they require you to install the shareware 'TapTools' ($45) from http://www.sp-intermedia.com/taptoolsmax/index.html. Some of you with full Pluggo might have these tools already.
***********************************************************
POLY III
is an emulation of the Korg Poly 800 mk,II. Version 2.2 sports a natty powder-blue and black interface and should sound better than the last version - it also includes automation for the 'joystick'
Note : See the Read Me. You need to get 3 additional 'objects' from other sites and put them in 'Library - Application Support – Cycling74 - Pluggo Support – Bonus Externs', as well as installing Taptools (see above)
***********************************************************
2D Panner
is basically 2 synced LFO's, one controlling pan and the other controlling overall signal level. When hooked up together you get a kind of 2D panning/tremelo effect, and some pretty Lissajou's figures to look at.
Note : This requires you to install the shareware Taptools (see above).
***********************************************************
'19'
A digital stutterer for spooling simulation, sampler tomfoolery & glitchification.The latest version sports an autopolling feature, a spring emulator and modulation which together creates anarchic Squarepusher-like effects.
Note : This requires you to install the shareware Taptools (see above) as well as some other objects. See the ReadMe for details.
See posts above about how to install (free) Pluggo Runtime so you can run these as AU, VST or RTAS plugs.
these are all very cool, by the way, glad to see them on OSX
***********************************************************
"For that oh-so-trendy bouncing delay, what sir needs is CURVER Actually, this is probably a bit different from what you were expecting."
***********************************************************
FREEVERB
"Simply a shell for Olaf Mathes freeverb~ object, a nice sounding reverb with a neat 'freeze' feature. The OS X version also has some nifty gating features."
***********************************************************
The next THREE aren’t strictly free as they require you to install the shareware 'TapTools' ($45) from http://www.sp-intermedia.com/taptoolsmax/index.html. Some of you with full Pluggo might have these tools already.
***********************************************************
POLY III
is an emulation of the Korg Poly 800 mk,II. Version 2.2 sports a natty powder-blue and black interface and should sound better than the last version - it also includes automation for the 'joystick'
Note : See the Read Me. You need to get 3 additional 'objects' from other sites and put them in 'Library - Application Support – Cycling74 - Pluggo Support – Bonus Externs', as well as installing Taptools (see above)
***********************************************************
2D Panner
is basically 2 synced LFO's, one controlling pan and the other controlling overall signal level. When hooked up together you get a kind of 2D panning/tremelo effect, and some pretty Lissajou's figures to look at.
Note : This requires you to install the shareware Taptools (see above).
***********************************************************
'19'
A digital stutterer for spooling simulation, sampler tomfoolery & glitchification.The latest version sports an autopolling feature, a spring emulator and modulation which together creates anarchic Squarepusher-like effects.
Note : This requires you to install the shareware Taptools (see above) as well as some other objects. See the ReadMe for details.
Last edited by Pantsdown666 on Wed Feb 04, 2004 1:07 am, edited 4 times in total.
-
Moritz Morpheus MkIII Moritz Morpheus MkIII https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=2011
- KVRian
- 668 posts since 11 Mar, 2002 from Vienna, Austria
wow, they look nice.. 
peace, 
-
- KVRian
- Topic Starter
- 868 posts since 7 May, 2002 from Sydney, Australia
hehe, yeah I'll look after that particular addictionalexsmoke wrote:Thanks for keeping this thread updated Pantsdown...it saves me trawling the internet daily for the new OSX pluggos.
-
- KVRian
- 822 posts since 19 Mar, 2001 from berlin / germany
looks great but i couldn't find the ladd(by peter elsea) thing that is requested for the poly x.
greetZ ANdreas
greetZ ANdreas
-
- KVRian
- Topic Starter
- 868 posts since 7 May, 2002 from Sydney, Australia
Ahh right, I just used the version of 'Ladd' I had from the OS9 versions .Cubaseuser wrote:looks great but i couldn't find the ladd(by peter elsea) thing that is requested for the poly x.
greetZ ANdreas
It's there but you have to dig a bit :
Go to the ftp://arts.ucsc.edu/pub/ems/lobjects/ site that Roger mentions in the ReadMe, download the 'Lobjects_classic.sea.Hqx' BinHex file. When you unstuff it, you'll find 'Ladd' inside.
Last edited by Pantsdown666 on Fri Jan 30, 2004 12:54 pm, edited 1 time in total.
-
- KVRian
- 822 posts since 19 Mar, 2001 from berlin / germany
ok i found it can't wait to try
greetZ ANdreas
greetZ ANdreas
-
- KVRian
- Topic Starter
- 868 posts since 7 May, 2002 from Sydney, Australia
Hint : When you get PolyIII going, try out the presets ... the boxes in the top half of that central grid on the interface are all presets.
-
- KVRian
- 822 posts since 19 Mar, 2001 from berlin / germany
it sounds cool but uses nearly 60% cpu of my ibook g4(800mhz) for one voice. at least i have the freeze function in logic
greetZ ANdreas
greetZ ANdreas
-
- KVRist
- 36 posts since 1 May, 2003 from Glasgow, Scotland
If anyone is having trouble finding the Ircam "Scale" object it's at a different address from the Read Me file. You can get it at:
ftp://ftp.forumnet.ircam.fr/pub/max/FAT/utilities/
ftp://ftp.forumnet.ircam.fr/pub/max/FAT/utilities/