Artemis: 6-voice Synth from Dreadbox + Sinevibes
-
- KVRist
- 445 posts since 3 Feb, 2017
Looks nice. I love the Dreadbox sound
If I didn't buy their Murmux already, I probably would have picked this up.
Before the Murmux, I had an Abyss which sounds great too.
If I didn't buy their Murmux already, I probably would have picked this up.
Before the Murmux, I had an Abyss which sounds great too.
- KVRAF
- 3812 posts since 20 Apr, 2005
That's a great little synth. Sounds amazing.egbert101 wrote: Tue Nov 12, 2024 1:00 pm The company that produced this woke nonsense:
https://www.dreadbox-fx.com/nymphes/
'Woke' is just a snark against having values that lead to wanting to be nice to other people. So, don't be snarky and try being nicer to people. You'll have a better life.
-
- KVRist
- 30 posts since 25 Jan, 2013
I knew this was coming, it looks and sounds great- but I have a Nymphes, Abyss and Medusa, which are already enough Dreadbox sounds. I'll watch the Sonicstate and Starsky Carr videos, but for now that's all. Being called 'woke' doesn't work as an insult, it just lets me know who to ignore.
* coffee please, black, no sugar *
-
AdvancedFollower AdvancedFollower https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=418780
- KVRian
- 1342 posts since 8 May, 2018 from Sweden
That's borderline audiophile pseudoscience nonsense. Yes, higher quality components will impact the sound very slightly, but the difference is extremely subtle and usually only shows up in scientific measurements. Even generic capacitors and other electric components have specs published, like voltage, capacitance, tolerances, internal resistance, temperature stability, ripple current, leakage etc. Manufacturers aren't just randomly choosing capacitors from a pile and hoping for the best, it's an exact science that has been perfected over decades.lfm wrote: Tue Nov 12, 2024 2:23 pmMy comment was purely about making own like boxeskritikon wrote: Tue Nov 12, 2024 12:49 pm Having said that, I doubt very much they make their own components and more than likely use bog standard Asian-made ones. There are very few synths that don't, no matter where they're made. Plenty of classic synths with screaming filters were made using bog standard off the shelf components.
- serious expensive stuff if to mold own plastic boxes
- unless bent metal which is much cheaper
Surely electronic components are made all over the world, I guess.
Standard components can have very different specs
The DAC project
"The silver cans are power supply electrolytes, we may change these for Blackgates, os-cons, TEAPO, Jackon Low ESR and stuff like that. You may also experimnt with tantalum caps - the result I havent yet tested but of course I will."
"2. fully upgraded by WIMA MKP and TEAPO lytics low esr shitty but cost effective caps.
3. As above but with the best OS-CONS - Sanyo caps regarded to be the best for digital.
"
"The subjective feeling was that the trebles from Tantalum were so much superior to the other four that it was shocking. They were airy, pure, clear, strong, beautiful. Just the best I ever heard. But the rest of the spectrum did not match. The balance was tilted.
Os-cons on the other hand sound ..... like nothing at all. Equipment disappears and the musicians simply come to me. No trebles no bass - just total transparency and insight into the event. Quite spectacular feeling. I was amazed.
Teapo had very strong bass and everything else was really good. I could live with that. Considering its low price and good availability - a great value. MUCH above the standard board.
"
http://lampizator.eu/LAMPIZATOR/LAMPUCE ... zator.html
There are major differences in properties for components.
- doing the hi end choices all the way the result will be noticed
- and some of it on the price tag too
When a chip has instant higher demand on current capacitors near by will deliver power not needing to go all the way from power supply.
If a chip getting a drop on voltage that will affect the analog output too in the end.
- first the low level harmonics at hi end will suffer
- this give a lush hi end when that works
I bought the standard board with power supply for $100 on eBay, then spent another $60 on capacitors and then a metal box.
- and got a DAC that is superior to anything shipped with medium prices electronics CD, DVD and BD players.
Keep in mind that even your computer's motherboard, which is extremely reliant on accurate voltages delivered with extreme timing accuracy under wildly varying loads (a CPU can go from a few watts at idle to 200W at full load within a few milliseconds) gets away with using cheap generic capacitors.
Lots of "professional" gear like audio interfaces, studio monitors etc. use cheap generic capacitors and other electric components that would absolutely horrify "audiophiles". Usually "audiophiles" fail to tell their $3000 DACs apart from cheap generic ones in blind tests. I find it funny that audiophiles spend thousands on DACs, amplifiers and even cables just to listen to music (although arguably they're listening to their gear, not the music), while the people who actually make music just plug their $99 headphones directly into their $120 Scarlett interface and get on with it.
Take a single oscillator, producing a drone. Send it to the wave shaper, altering the tone.
This can be a triangle, Sawtooth or a square. Modulate the pulse width, nobody will care
This can be a triangle, Sawtooth or a square. Modulate the pulse width, nobody will care
- KVRAF
- Topic Starter
- 12183 posts since 7 Sep, 2006 from Roseville, CA
Expected purchase end Feb - mid March.
Logic Pro | LUNA Pro | OB-X8 | Prophet 6 | OB-6 | Trigon 6 | Rev2 | TEO-5 | Pro 3 | SE-1X | Minitaur | Integra-7 | TR-1000 | Analog RYTM mk2 | Digitakt 2 | TD-3 MO | TD-3 | Maschine+
- KVRAF
- Topic Starter
- 12183 posts since 7 Sep, 2006 from Roseville, CA
Logic Pro | LUNA Pro | OB-X8 | Prophet 6 | OB-6 | Trigon 6 | Rev2 | TEO-5 | Pro 3 | SE-1X | Minitaur | Integra-7 | TR-1000 | Analog RYTM mk2 | Digitakt 2 | TD-3 MO | TD-3 | Maschine+
- KVRAF
- 13719 posts since 19 Jun, 2008 from Seattle
I'm not a musician, but I've designed sounds that others use to make music. http://soundcloud.com/obsidiananvil
- KVRAF
- 25012 posts since 12 Jul, 2003 from West Caprazumia
Woke? In what way is it woke? Please explain.egbert101 wrote: Tue Nov 12, 2024 1:00 pm The company that produced this woke nonsense:
https://www.dreadbox-fx.com/nymphes/
Nonsense? In what way is it nonsense? Please explain.
Of course I am convinced that you completely lack the cognitive ability to answer either one of these in a way that isn't a) highly cringe-worthy, b) simply extremely dumb and c) basically just overall a complete mental disaster, but I am willing to give you the benefit of the doubt either way.
*grabs popcorn*
- Beware the Quoth
- 35432 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
you may need quite a lot; that account hasnt been used since the day after they posted that, ie mid-November last year.
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
- KVRAF
- 25012 posts since 12 Jul, 2003 from West Caprazumia
Oh, I see - thanks for the heads up...whyterabbyt wrote: Tue Jan 28, 2025 12:54 pmyou may need quite a lot; that account hasnt been used since the day after they posted that, ie mid-November last year.
I thought it was a new thread (especially since I have never heard of Artemis until today)
-
Constructed Identity Constructed Identity https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=288890
- KVRian
- 1303 posts since 29 Sep, 2012 from Minnesota
Full demo :
I may have to make space for one.
I may have to make space for one.
- KVRAF
- Topic Starter
- 12183 posts since 7 Sep, 2006 from Roseville, CA
I don’t know how much longer I can wait. I may need to fly to Greece and grab the first one off the production line.
Logic Pro | LUNA Pro | OB-X8 | Prophet 6 | OB-6 | Trigon 6 | Rev2 | TEO-5 | Pro 3 | SE-1X | Minitaur | Integra-7 | TR-1000 | Analog RYTM mk2 | Digitakt 2 | TD-3 MO | TD-3 | Maschine+
- KVRer
- 2 posts since 1 May, 2025
Mine was shipped 3 days ago direct from Dreadbox, can’t waitcryophonik wrote: Wed Apr 30, 2025 1:42 am
I don’t know how much longer I can wait. I may need to fly to Greece and grab the first one off the production line.