KVR Audio

camsr · Post by **camsr** » Sun Aug 12, 2012 3:58 am

When loaded as an effect plugin, the volume and hpf work, but no lpf? That was kinda disappointing.

Frantz · Post by **Frantz** » Sun Aug 12, 2012 5:33 am

It sounds fantastic especially with both chorus buttons on. It doesn't do many things but what it does, it does very well. I will almost certainly buy it after I've spent some more time with it.

lionscub68 · Post by **lionscub68** » Sun Aug 12, 2012 6:15 am

So, now I shoud be able to re-create this track, using this plugin and some samples of my old Soundmaster ST-305.
And hell, it'll be in time thnaks to that handy-dandy host sync feature!

you kids are so spoiled with this newfangled midi thing.

http://soundcloud.com/robertdorschel/yo ... nts-wearin

this old 4-track piece = 1 track of the SoundMaster ST-305, & 3 tracks of the Juno-60: the arp bass, the chords, and one hand-filtered drone pad underneath.

No, this doesn't use the plugin... I just wanted to show what the Juno-60 can do without sequencing. And now we can do this all over again!

Kriminal · Post by **Kriminal** » Sun Aug 12, 2012 6:35 am

Ingonator wrote:
electro wrote:
Ingonator wrote: I made only a fast comparison with Fernando's Juno 60 presets for Diva. I am sure that with some more tweaking you could get the sound of both (Diva and U-NO-LX) closer.

As you got the real Juno-60 you got a better comparison than i have with the audio demos here: http://www.synthmania.com/juno-60.htm

Ingo
Parameter for Parameter TAL-Uno-LX has been tweaked to perfection. Its exactly same as the Juno.
I the same post i mentioned that i know Diva does not have the same parameter values but it should be possible to get comparable sounds with some tweaking like Braj already mentioned.

As i already mentioned i purchased U-NO-LX to get a proper Juno-60 emulation.
My only real complaint is that i found a little lack in the low end of the sound but i could be wrong with that. I'll post an demo with and without using an additional EQ soon.

Besides that there seems to be a bug like already mentioned:
- The factory sounds sometimes disappear from the list in the menu. Could be solved by closing an re-opening the GUI
This is not very easy to replicate. It happened after using the plugin for a while and browsing through presets.

Ingo

I found that bug 5 mins after it was released (i am an expert bug hunter after all) and you said it was fine there. Are you now saying you can repruoduce that ?

braj · Post by **braj** » Sun Aug 12, 2012 6:50 am

My son came pover and was pounding on my keyboard, enjoying the new synth, then I went to change a preset and they were gone! Closing and opening did resolve it but i have no idea what triggered it.

Ingonator · Post by **Ingonator** » Sun Aug 12, 2012 7:10 am

Kriminal wrote:
Ingonator wrote:
Besides that there seems to be a bug like already mentioned:
- The factory sounds sometimes disappear from the list in the menu. Could be solved by closing an re-opening the GUI
This is not very easy to replicate. It happened after using the plugin for a while and browsing through presets.
I found that bug 5 mins after it was released (i am an expert bug hunter after all) and you said it was fine there. Are you now saying you can repruoduce that ?

Hi,

at the time i posted i did not find the bug but then a short time later. I had also posted an update with this at my first post.
I just tried to reproduce it and here is how i was "successful":
Started the plugin freshly and first clicked trough all presets. After that i clicked through some random presets. After that the presets menu disappeared. Tried the same again and the same happened again.
Closing and re-opening the GUI does solve it.

braj wrote:My son came pover and was pounding on my keyboard, enjoying the new synth, then I went to change a preset and they were gone! Closing and opening did resolve it but i have no idea what triggered it.

Seems to be the same bug that Kriminal and i already found. See the text directly above.

Ingo

Kriminal · Post by **Kriminal** » Sun Aug 12, 2012 7:21 am

Ingonator wrote:
Kriminal wrote:
Ingonator wrote:
Besides that there seems to be a bug like already mentioned:
- The factory sounds sometimes disappear from the list in the menu. Could be solved by closing an re-opening the GUI
This is not very easy to replicate. It happened after using the plugin for a while and browsing through presets.
I found that bug 5 mins after it was released (i am an expert bug hunter after all) and you said it was fine there. Are you now saying you can repruoduce that ?
Hi,

at the time i posted i did not find the bug but then a short time later. I had also posted an update with this at my first post.
I just have to find a way how this could be easily reproduced as it seems to be a bit random.

braj wrote:My son came pover and was pounding on my keyboard, enjoying the new synth, then I went to change a preset and they were gone! Closing and opening did resolve it but i have no idea what triggered it.
Seems to be the same bug that Kriminal already found.

Ingo

Just keep switching presest for a few minutes, happens everytime here (x64)

Ingonator · Post by **Ingonator** » Sun Aug 12, 2012 7:24 am

Kriminal wrote:
Just keep switching presest for a few minutes, happens everytime here (x64)

Hi,

just found exactly that myself and i corrected my last post. Could reproduce it three times in less than 8 minutes now (with closing and re-opening the GUi between).
It could happen in less than a few minutes.
I started clicking through all presets with the arrows very fast and then start clicking on some random ones from the drop-down menu and suddenly it happens.

BTW you could still use the arrows for switching presets after the bug happens but the drop-down menu disappears.

UPDATE:
i reported the bug at the new support page here:
http://kunz.corrupt.ch/Support

Ingo

Woody Aki · Post by **Woody Aki** » Sun Aug 12, 2012 8:53 am

Is there anyone in here that has A/Bed the U-NO-LX with the infamous Flintlock Juno VSTi? It would be interesting to read the comparisons, especially since there's quite a few in this forum that held the Flintlock in such high regard...

braj · Post by **braj** » Sun Aug 12, 2012 8:55 am

Ingonator wrote:
braj wrote:My son came pover and was pounding on my keyboard, enjoying the new synth, then I went to change a preset and they were gone! Closing and opening did resolve it but i have no idea what triggered it.
Seems to be the same bug that Kriminal and i already found. See the text directly above.

Ingo

Yeah, I was corroborating your experience there.

Ingonator · Post by **Ingonator** » Sun Aug 12, 2012 9:53 am

Ingonator wrote:
Kriminal wrote:
Just keep switching presest for a few minutes, happens everytime here (x64)
Hi,

just found exactly that myself and i corrected my last post. Could reproduce it three times in less than 8 minutes now (with closing and re-opening the GUi between).
It could happen in less than a few minutes.
I started clicking through all presets with the arrows very fast and then start clicking on some random ones from the drop-down menu and suddenly it happens.

BTW you could still use the arrows for switching presets after the bug happens but the drop-down menu disappears.

UPDATE:
i reported the bug at the new support page here:
http://kunz.corrupt.ch/Support

Ingo

Just got a reply from Patrick (TAL developer) and he seem to be working on that bug.

UPDATE:
New version 1.54 with a fix of the bug is available here:
http://kunz.corrupt.ch/products/tal-u-no-lx

This must be the fastest bugfix of any time...

Ingo

solidtrax · Post by **solidtrax** » Sun Aug 12, 2012 10:55 am

Bugfixed version is already online.

braj · Post by **braj** » Sun Aug 12, 2012 10:58 am

solidtrax wrote:Bugfixed version is already online.

It says for OS X, does he know the issue also exists with Windows?

Ingonator · Post by **Ingonator** » Sun Aug 12, 2012 11:02 am

braj wrote:
solidtrax wrote:Bugfixed version is already online.
It says for OS X, does he know the issue also exists with Windows?

He does and i just got an email about a new update.
The fixed version is available here:

http://kunz.corrupt.ch/products/tal-u-no-lx

I was not able to recreate the bug with the latest version 1.54.

Many thanks to Patrick from TAL for this extremely fast bugfix.

BTW you should maybe backup your own presets before installing the update. I found that mine disappeared after the new installation. Good thing i have made a backup before. I'll contact Pattrick about this.

Ingo

solidtrax · Post by **solidtrax** » Sun Aug 12, 2012 11:09 am

Patrick is the best

btw,

I've made a track with the beta. For this track we used 20 instances of the beta version of this plugin and the Precision Limiter from UAD on the mainbus to make the track a little bit louder. So no EQ, Compressors, Reverb and Delay or other plugins. In other words this is what the plugin is capable of and your listening to the RAW sound of this beauty!

http://soundcloud.com/solidtrax/solidtr ... u-no-lx-20

TAL-U-NO-LX. Uber accurate Juno 60 emulation.