KVR Audio

elxsound · Post by **elxsound** » Fri Feb 09, 2024 8:16 pm

vurt wrote: Fri Feb 09, 2024 8:15 pm
elxsound wrote: Fri Feb 09, 2024 6:04 pm
vurt wrote: Wed Feb 07, 2024 12:07 pm Screenshot_20240207_120614_Gallery.jpg
No more handwritten notes?

Not that I’d blame them for just adding stickers. Definitely easier.
yeah of course, the note is on the back of the sticker

Nice one! Makes me wish I could buy more things from them. Must resist.

vurt · Post by **vurt** » Fri Feb 09, 2024 8:41 pm

elxsound wrote: Fri Feb 09, 2024 8:16 pm
vurt wrote: Fri Feb 09, 2024 8:15 pm
elxsound wrote: Fri Feb 09, 2024 6:04 pm
vurt wrote: Wed Feb 07, 2024 12:07 pm Screenshot_20240207_120614_Gallery.jpg
No more handwritten notes?

Not that I’d blame them for just adding stickers. Definitely easier.
yeah of course, the note is on the back of the sticker
Nice one! Makes me wish I could buy more things from them. Must resist.

yeah, theyre nice folk. had a few chats with them over the years, regarding various purchases (mainly stuff id preordered, then theres a delay so they get in touch. nice!) always helpful in getting stuff sorted

WatchTheGuitar · Post by **WatchTheGuitar** » Fri Feb 09, 2024 9:11 pm

They’re cool. When I called them to ask about a particular quantiser module I was after they didn’t have one but called a guy traveling over from Barcelona to bring one from their store there so I still got it within a few days.

cryophonik · Post by **cryophonik** » Sat Feb 10, 2024 7:19 pm

1E56EBB9-D6AB-4564-8BD0-76DDD7E968E9.jpeg

Upgraded from the H9 Max to the H90!

simmo75 · Post by **simmo75** » Sat Feb 10, 2024 10:09 pm

cryophonik wrote: Sat Feb 10, 2024 7:19 pm 1E56EBB9-D6AB-4564-8BD0-76DDD7E968E9.jpeg

Upgraded from the H9 Max to the H90!

Lovely!
I nearly bought one too, but decided to go with the Meris MercuryX and LVX.
Enjoy!

elxsound · Post by **elxsound** » Sat Feb 10, 2024 10:33 pm

simmo75 wrote: Sat Feb 10, 2024 10:09 pm
cryophonik wrote: Sat Feb 10, 2024 7:19 pm 1E56EBB9-D6AB-4564-8BD0-76DDD7E968E9.jpeg

Upgraded from the H9 Max to the H90!
Lovely!
I nearly bought one too, but decided to go with the Meris MercuryX and LVX.
Enjoy!

Nice one with the MercuryX!

So much good stuff out there right now.

cryophonik · Post by **cryophonik** » Sun Feb 11, 2024 1:15 am

simmo75 wrote: Sat Feb 10, 2024 10:09 pm
cryophonik wrote: Sat Feb 10, 2024 7:19 pm 1E56EBB9-D6AB-4564-8BD0-76DDD7E968E9.jpeg

Upgraded from the H9 Max to the H90!
Lovely!
I nearly bought one too, but decided to go with the Meris MercuryX and LVX.
Enjoy!

I just checked those out and they look/sound great!

Moe Shinola · Post by **Moe Shinola** » Sun Feb 11, 2024 9:34 am

Lumii_20240211_035621614.jpg

Found a Red Sound Darkstar on Craigslist the week before Christmas.
Also just took delivery of a Roland t8.

foosnark · Post by **foosnark** » Sun Feb 11, 2024 1:30 pm

I really wanted to like the Darkstar more than I did. More desktop synths should have joysticks.

vitocorleone123 · Post by **vitocorleone123** » Sun Feb 11, 2024 6:08 pm

cryophonik wrote: Sun Feb 11, 2024 1:15 am
simmo75 wrote: Sat Feb 10, 2024 10:09 pm
cryophonik wrote: Sat Feb 10, 2024 7:19 pm 1E56EBB9-D6AB-4564-8BD0-76DDD7E968E9.jpeg

Upgraded from the H9 Max to the H90!
Lovely!
I nearly bought one too, but decided to go with the Meris MercuryX and LVX.
Enjoy!
I just checked those out and they look/sound great!

Ive had a Mercury X for two weeks and am still getting to know it. It can function as any of the following as a simple pedal: chorus, delay, compressor, saturation, overdrive, limiter, pitch shifter, tremolo, vibrato, and more. But it of course excels at combining one or more of those and feeding it into one of the great reverb algorithms.

Last night I made a preset from scratch that combined chorus, light bit crushing, delay, and reverb - pretty much replacing what few other hardware fix pedals I have - all within the X. And it sounded great.

elxsound · Post by **elxsound** » Mon Feb 12, 2024 11:11 pm

The black Mixwitch panel arrived today!

This was a PIA to remove the old one without the proper tools. Those are fastened on very well.

My next purchase will likely be one of those kits for removing eurorack nuts.

IMG_0325.png

pekbro · Post by **pekbro** » Mon Feb 12, 2024 11:26 pm

Likely there are easier ways to make yourself go blind. just sayin heh

ghettosynth · Post by **ghettosynth** » Thu Feb 15, 2024 10:56 pm

This arrived today. I have an orange GHS tele body that I picked up a few years ago but never got around to doing anything with. Because I purchased new pickups for the ghrol that I didn't keep, I decided to finish the orange tele with those, this neck, and a Fender american bridge that I pickup up from craigslist a few years ago. Nothing like adding one more unfinished project to my list.

FWIW: It seems decent. The frets need a bit of a dress, but I expected that. I might replace the nut, but I'll finish the guitar first. The finish has some minor issues, but only on the face of the headstock. I may refinish the face of the headstock and the back of the neck, I may not. I wanted to practice my fret finishing skills on something that was cheap and easy to replace the parts on. All in it will be about a $200 guitar.

(I'm posting this to get an actual completion time on this thing, go on, place your bets!)

cryophonik · Post by **cryophonik** » Thu Feb 15, 2024 11:23 pm

ghettosynth wrote: Thu Feb 15, 2024 10:56 pm
(I'm posting this to get an actual completion time on this thing, go on, place your bets!)

7:35 PM EDT is my guess.

Do I need to specify the date, too?

ghettosynth · Post by **ghettosynth** » Thu Feb 15, 2024 11:32 pm

cryophonik wrote: Thu Feb 15, 2024 11:23 pm
ghettosynth wrote: Thu Feb 15, 2024 10:56 pm
(I'm posting this to get an actual completion time on this thing, go on, place your bets!)

7:35 PM EDT is my guess.

Do I need to specify the date, too?

The year should be close enough.

2024: A Year in Gear (What You've Bought or Want to Buy in 2024)