Cytomic "The Drop" Resonant Filter

[MFXxx]

T A K E Y O U R T I M E >>> M O N E Y A T T H E R E A D Y

>>>>R E G A R D L E S S O F R E A L E A S E D A T E<<<<<

Very sure this is going to exceed expectations,
from what I've heard from the demoes so far...sold.

Unless its after October - the wife will drop our first and I am sure, as you know, I won't have time for the drop, to drop !!!!

[Sendy]

Still can't stop listening to One Sided Tranny. That resonance, it's a thing of beauty, so warm and sticky and glowey; especially in the HPF, which are often left out in the cold while the LPF gets all of the warmth and attention.

Thanks Sendy! I double checked with the synth diy community and can confirm that my custom high pass ms20 circuit design is completely original, so I'm quite proud of that and I'm glad you liked it in particular The guys on the synth diy list had a similar response in saying they have been focussed way too much on low pass filters but after hearing that demo are keen to build some high passes instead.

It's seriously the nicest HPF filtersweep I've heard, probably ever, software and hardware! I'm SO looking forwards to this filter

And yes, HPF is not only an essential tool for cutting and/or etheral sounds, it also seems to be a real test of filter making mettle, because the resonance is just hanging over silence, and is a lot more "bare" and exposed compared to a lowpass, where the resonance kinda nestles on top of the filtered harmonics. Most digital HPFs seem kinda frizzy at high resonance settings.

[andy-cytomic]

Andy, since it's highly related, check the Threeler filter. I think it's a really great, pretty ideal design. It's what I've always wanted. I suggest adding something like that to your filter plugin eventually. (I'll have a Threeler here in a couple of weeks, I could send some samples)

Thanks for the heads up! I've not seen that structure before. It is very similar to a sallen key in that the last low pass is fed into the bottom of the cap of the first low pass, I would have to plot the shapes to see what this does in terms of the filter shape. I'll probably steer clear of such a structure since I want 2 pole and 4 pole filters for the drop, and this is a three pole, but thanks for letting me know about it.

[andy-cytomic]

I just sent you the email Andy

Thanks! I've processed them for you and emailed you back a link It's great having problem examples like this to work with to double check everything.

[refresher]

sounds really nice, yammie, when will it be ready ?

[lorenzdj]

Hello Andy, why not give everyone the chance to buy the beta at the official price ....... then calmly'll upgrade to official put (in this case for free for those who purchased the beta)

[twolegstoneworks]

Hello Andy, why not give everyone the chance to buy the beta at the official price ....... then calmly'll upgrade to official put (in this case for free for those who purchased the beta)

+1

Do like Urs/u-he. Make an early-adopters price for the beta! You'll get a lot of new customers and you will have a much larger crowd of bughunters than you'd normally have for a beta. And since people bought into it early they agree to the fact that it's beta, and you'll get minimal complaints about bugs. It's a 100% win-win

[ariston]

Hello Andy, why not give everyone the chance to buy the beta at the official price ....... then calmly'll upgrade to official put (in this case for free for those who purchased the beta)

+1

Do like Urs/u-he. Make an early-adopters price for the beta! You'll get a lot of new customers and you will have a much larger crowd of bughunters than you'd normally have for a beta. And since people bought into it early they agree to the fact that it's beta, and you'll get minimal complaints about bugs. It's a 100% win-win

+infinity.

[lorenzdj]

Hello Andy, why not give everyone the chance to buy the beta at the official price ....... then calmly'll upgrade to official put (in this case for free for those who purchased the beta)

+1

Do like Urs/u-he. Make an early-adopters price for the beta! You'll get a lot of new customers and you will have a much larger crowd of bughunters than you'd normally have for a beta. And since people bought into it early they agree to the fact that it's beta, and you'll get minimal complaints about bugs. It's a 100% win-win

I bought a product with this mode u-he

[filtide]

If you make an eq, please make something like Surfer-EQ but with midi support.

[meloco_go]

If you make an eq, please make something like Surfer-EQ but with midi support.

Well, Andy's forte is analog modelling. I doubt you'd find analog prototype for that.

[homunculus]

I just sent you the email Andy

Thanks! I've processed them for you and emailed you back a link It's great having problem examples like this to work with to double check everything.

Andy the sweeps you did with the Drop were amazing! With all the other filters(volcano,brainworx cleansweep,EQuality) as soon as the sweep hit that 1000K range it just crapped out and gave it that as you called it (waveshaping distortion) which just sounds terrible and with the Drop you even exaggerated the resonance and it still didnt crap out with noo oversampling! I was planning on getting some moog filters but not anymore! I cant wait to get my mouse on this thing, I'm going to open all the projects on the album Im working on and replace every filter with the Drop!

I'm going to give you half a thank you now and will give you the other half as soon as the Drop comes out! lol

cheers
Wilson

[Sendy]

I'll give a full thankyou on the release date, then a half-thank the next day, a 1/3-thank the day after that, etc... on to infinity... or at least up until my cutoff frequency

[andy-cytomic]

Hello Andy, why not give everyone the chance to buy the beta at the official price ....... then calmly'll upgrade to official put (in this case for free for those who purchased the beta)

Yep, as soon as there is something with near final graphics, and filter models that won't change in tone very much I'll have an open beta. I'm all up for even changing the interface a bit based on feedback, but I need to be happy that the sound won't change much at all otherwise people will have broken projects!

[Tp3]

I need to be happy that the sound won't change much at all otherwise people will have broken projects!

Well, can't we buy broken projects with the option to later upgrade to a full, ready-to-use projects ?