KVR Audio

c_voltage · Post by **c_voltage** » Fri Mar 25, 2016 11:05 pm

ErikH wrote:These are presets for (expensive) keyboards that use the MPE technology like Linnstrument, Roli and the upcoming KMM K-Board Pro 4 where things like tilt etc also influence the sound color.
With my QuNexus I get a sound but it ends abrupt.

Oh understood, then ok.

Very cool new chorus btw, also sustein for noise osc in pluck good idea.

Sampleconstruct · Post by **Sampleconstruct** » Fri Mar 25, 2016 11:22 pm

c_voltage wrote:
ErikH wrote:These are presets for (expensive) keyboards that use the MPE technology like Linnstrument, Roli and the upcoming KMM K-Board Pro 4 where things like tilt etc also influence the sound color.
With my QuNexus I get a sound but it ends abrupt.
Oh understood, then ok.

Very cool new chorus btw, also sustein for noise osc in pluck good idea.

Sustain/Stereo-switches for pluck synth were always there, they were just hidden in the inspector. What's new is that we can now tune the sample in the oscillator window and that we can modulate sample start position.

Cinebient · Post by **Cinebient** » Fri Mar 25, 2016 11:27 pm

Great update, thanks!
As owner of a Seaboard i'm happy about the MPE options and patches. But from most of the MPE extras i get missing samples errors?!?!
And the new racks also have just empty buttons with %. No parameters labeled here.

Edit: After a reboot the racks GUI´s seems now to work.....

Very nice indeed! Now i begin to love Falcon. The thorus is superb too.
....and it seems it was my fault. The GUI´s of the new racks still don´t appear in keygroup and layer level, just in program. I think it´s right so? But why can i open the racks in the other layers then. A bit confusing.

c_voltage · Post by **c_voltage** » Sat Mar 26, 2016 12:06 am

Sampleconstruct wrote: Sustain/Stereo-switches for pluck synth were always there, they were just hidden in the inspector. What's new is that we can now tune the sample in the oscillator window and that we can modulate sample start position.

Oh, hm, ok.

woodsdenis · Post by **woodsdenis** » Sat Mar 26, 2016 12:28 am

mmm all of the MPE presets mute and have to be reloaded if I use the pitch bend . I am using a "normal" non MPE controller , is this normal ?

thetechnobear · Post by **thetechnobear** » Sat Mar 26, 2016 12:31 am

1.1 nice update, thank you

been using falcon from the beginning with MPE, so nice to see it featured and with some presets

one thing, Id say perhaps a few of the presets should show gain be altered by Z/Poly AT as its perhaps one of the most common uses.

oh, MPE is not just linnstrument/roli.... MPE has been available on the forerunners for as long (e.g continuum, soundplane, eigenharps) these young upstarts

... Ive been using it with the soundplane and eigenharp, and I recommend falcon for these instruments

ErikH · Post by **ErikH** » Sat Mar 26, 2016 7:12 am

Am I the only one who has Fuzz 4 and MaxMS interfaces without the (white) indications of what knobs and buttons do?

I do get the % values (light blue) but that's it, and I have to guess which button does what.

Cinebient · Post by **Cinebient** » Sat Mar 26, 2016 8:54 am

ErikH wrote:Am I the only one who has Fuzz 4 and MaxMS interfaces without the (white) indications of what knobs and buttons do?

I do get the % values (light blue) but that's it, and I have to guess which button does what.

Me too, but only in keygroup and layer mode. In programm it works! Seems a bug?

c_voltage · Post by **c_voltage** » Sat Mar 26, 2016 1:55 pm

Cinebient wrote:but only in keygroup and layer mode. In programm it works

Yep, the same.

quilys · Post by **quilys** » Sat Mar 26, 2016 5:09 pm

Where can I find the new 100 presets ? are all mixed with the old ones ? I cannot find them.....Help!

anxiousmofo · Post by **anxiousmofo** » Sat Mar 26, 2016 6:18 pm

quilys wrote:Where can I find the new 100 presets ? are all mixed with the old ones ? I cannot find them.....Help!

Yes. For example, if you look in the Bells section, you will see presets with Thorus in the name.

Did you download the soundset update? It is a separate download.

ThomasHelzle · Post by **ThomasHelzle** » Sat Mar 26, 2016 7:21 pm

I still find the startup behaviour of Falcons library a bit annoying:
I have several UVI .ufs Soundbanks installed on a normal harddrive and each time I start Falcon it takes up to a minute before all the libraries get listed and are accessible - not sure why that isn't cached somehow? At first I only see three of the 14 I have.
During that initial scanning, if I open up a "Places" location and dig down into some folder, the moment all the UVI libraries are finished scanning, the whole tree is collapsed and I have to twiddle down again from scratch.
So basically, until the rather slow scan is finished, I can not navigate (I can but it's undone when the scan is finished).
I would like to
a.) have the libraries cached if they do not change.
b.) have the tree state not reset when the library finishes indexing (would even better if the tree state would be saved between sessions).

Would that be possible?

Thanks,

Tom

SJ_Digriz · Post by **SJ_Digriz** » Sat Mar 26, 2016 7:36 pm

ThomasHelzle wrote:would even better if the tree state would be saved between sessions

this and saving panel state

nrosko · Post by **nrosko** » Sat Mar 26, 2016 7:38 pm

crashing in live 9.6 when i change speed in ircam stretch.

Also when i use the chain of events chorder/microtuner/tonal harmonizer the cpu goes crazy, even after reducing polyphony to 1.

c_voltage · Post by **c_voltage** » Sat Mar 26, 2016 8:27 pm

nrosko wrote:crashing in live 9.6 when i change speed in ircam stretch.

Tested it just now in Live 9.6 (64bit, windows 7), i cannot confirm. Large CPU activity yes, but no crash here.

UVI Falcon - v4 = 2026 released - rumors, ads, praise, kindergarden, auto-sampling and off-topic inside!