Reverberate - Convolution reverb with modulation for Mac and PC (AU, AAX, VST)

[liquidsonics]

... - maybe set up a "blank" preset to achieve this?
- or maybe a "reset all" button theat turns everything off.

With everything turned off, and a good IR loaded - it will sound fine, any other Reverbrate settings you engage with are a bonus.

In the preset Load/Save menu there are reset features for whole banks and individual presets.

[JamieSkeen]

Gotta give a big thanks for the update. Not often does a piece of software get this kind of attention without a paid upgrade. Thanks!!!!!

[jbraner]

In the preset Load/Save menu there are reset features for whole banks and individual presets.

I'm just thinking outloud - how to make things "EZ"

You could have a default bank with the first few (in case you want more than one in your song) presets set to default. Then just load Reverbrate and load up a IR - and voila! Then as I said, any other settings you play with are a bonus.

[liquidsonics]

For those who upgraded to v1.600 from v1.506 I recommend picking up the latest update as there was a slight error in the way old presets were handled (the width parameter came through incorrectly). For those using <=1.505 this wasn't an issue. Further, 1.610 now uses a little less memory in the new ER units and the EQ toggles now automatically enable when EQ tweaks are made as a workflow streamline feature.

[blakecasimir]

What an excellent investment this plugin was. I'm still using it in absolutely every project I make, as a send 'verb. Add STN's Bricasti IRs and you have truly excellent quality as a result. Thanks for the continued support, Matt!

[liquidsonics]

I've posted a small update which resets the demo timer as a few people have contacted me asking to try the new features but they expired their demo months ago when the product was less fully featured than it is now, hopefully this will be useful for some.

[ezelkow1]

Just a suggestion, dunno how hard this would be to implement. I think it would be good if when looking at the connection map from the chorus/delay/mixer/settings pages if when you click on one of the elements it would take you to the appropriate page. Since you can already turn on/off the various elements from the map I think this may be useful too

Oh and maybe a way to do host synced lfo with the chorus and eq lfos, well any lfo besides the delays that are already synced.

[liquidsonics]

Hi, I have posted a beta update to Reverberate and Reverberate Core which includes a 64-bit VST and performance improvements for the x86 build regarding start-up time. It is linked from the main product page. Since a number of things had to change internally to make this happen (to do with the GUI and audio loading library) I am not putting this as the main release for a little while while some wider testing establishes if there are any major issues.

Please report any problems using the contact page on the main website.

There is no 64-bit AU yet. It is planned but as yet it is unclear how long this is going to take to implement. I appreciate probably more people are interested in a 64-bit AU than a 64-bit VST, but practicalities dictated the order this had to be done in.

[liquidsonics]

I've added a new feature to the filters tabs so that now frequencies be selected from A0 - G#8 using pulldown menus providing a very natural and musical frequency selection approach. This can be useful for adding (or removing) musically relevant high Q resonances to IRs. The update applies to Reverberate and Reverberate Core.

[ezelkow1]

I might be retarded, but where is this in reverberate? I assumed by filter you meant the eq pages, but I looked in all of them and didnt see any note drop downs

[liquidsonics]

I might be retarded, but where is this in reverberate? I assumed by filter you meant the eq pages, but I looked in all of them and didnt see any note drop downs

For each of the IR1/IR2/post EQ's consolidated filter tabs (where all 5 bands are present on a single tab) next to the EQ frequency figure display (eg 1.2kHz) there is a note icon which brings up the menu.

[bullshark]

Would it be possible to offers the option of changing the knob behavior from circular to linear? Or, if it does already, make it more obvious how?

Circular has the big problem of parameter jumping when you first click on a knob, which can cause some nasties to happen in one monitoring chain, especially if one messes with the wet/dry signal control. Not to mention it make subtle adjustment right next to impossible.

I was able to force linear behavior through my host, but it isn't the best option.

[liquidsonics]

Would it be possible to offers the option of changing the knob behavior from circular to linear? Or, if it does already, make it more obvious how?

Circular has the big problem of parameter jumping when you first click on a knob, which can cause some nasties to happen in one monitoring chain, especially if one messes with the wet/dry signal control. Not to mention it make subtle adjustment right next to impossible.

I was able to force linear behavior through my host, but it isn't the best option.

Yes if you look under the dials mode on the settings tab.

[bullshark]

Hm, don't have a setting tab... or is that only in the pro version? If so, i'll certainly purchase it, price is reasonable, the zero latency and x64 alone is worth the price of admission.

[liquidsonics]

Hm, don't have a setting tab... or is that only in the pro version? If so, i'll certainly purchase it, price is reasonable, the zero latency and x64 alone is worth the price of admission.

Yes, those features and the additional configurability options are only available in the commercial product.