KVR Audio

ErikH · Post by **ErikH** » Tue Apr 05, 2016 7:31 pm

OK!

Now in standalone mode I once again get my card's buffer sizes.
Thanks guys!

deastman · Post by **deastman** » Tue Apr 05, 2016 9:18 pm

ErikH wrote:I find that , for a far as MPE is concerned, the problem is not the vst intruments but the keyboards/instruments that can work with it. If your keyboard cannot produce the midi data, it cannot send it, and that's the end of the road. At this moment, the only ones that really can are all high-end and come with high-end price-tags. Generally speaking, we may need two keyboards (or instruments) in the future: one looking backwards for piano/harpsichord/organ like use, and one looking to the future for the expressivity MPE is adding.

There are new MPE controllers coming out all the time, and I don't think the price of a Linnstrument or Seaboard RISE is that exorbitant. The "problem"is most definitely the software support, not the fact that the controllers aren't cheap. If the software can't make use of your fancy controller, there isn't any point to it. Falcon and a few others are making great inroads, however. A few of the sample MPE patches in the latest update are simply sublime to play from my Seaboard.

Diego_C · Post by **Diego_C** » Tue Apr 05, 2016 10:29 pm

otristan wrote:@ErikH

Please download Falcon back.
Looks like a test have made its way to the release build.

My bad.

wops..sorry if I pop in, I downloaded the latest 1.1.1 but here on this post above you said it was a test build...how can I check if what I downloaded some hours ago is the definitive 1.1.1 or a wrong build :-/ ... ? I am on a limited connection so knowing if what I have downloaded is the correct one would save me half giga of re-download..
Thanks in advance
Diego

Sound Author · Post by **Sound Author** » Tue Apr 05, 2016 11:30 pm

Quick Question. Why can't I rename macros in effect racks? I add an effect to Chain1, right-click on a parameter, assign to effect rack macro / add new macro. When I double click to rename the macro, nothing happens

Sampleconstruct · Post by **Sampleconstruct** » Tue Apr 05, 2016 11:46 pm

Straight off the bounce, something more groove oriented using 4 fresh Falcons and limiter on the master output:

https://soundcloud.com/sampleconstruct/ ... con-sounds

----

EDIT (a few hours later)

...and something more surreal using 2 fresh Falcons and a limiter on the outs:

https://soundcloud.com/sampleconstruct/ ... con-sounds

Musical Gym · Post by **Musical Gym** » Wed Apr 06, 2016 5:45 am

Any chance the automatic Pace installer could be a user choice instead of running each time we install an update?
I keep cancelling out of it since Pace is installed; during canceling, I never know if it's partially installing or what.

otristan · Post by **otristan** » Wed Apr 06, 2016 7:17 am

Diego_C wrote:
otristan wrote:@ErikH

Please download Falcon back.
Looks like a test have made its way to the release build.

My bad.
wops..sorry if I pop in, I downloaded the latest 1.1.1 but here on this post above you said it was a test build...how can I check if what I downloaded some hours ago is the definitive 1.1.1 or a wrong build :-/ ... ? I am on a limited connection so knowing if what I have downloaded is the correct one would save me half giga of re-download..
Thanks in advance
Diego

The regression was only in windows standalone version regarding soundcard with weird buffer size.
So if you don't have one of those, don't bother.

otristan · Post by **otristan** » Wed Apr 06, 2016 7:19 am

Sound Author wrote:Quick Question. Why can't I rename macros in effect racks? I add an effect to Chain1, right-click on a parameter, assign to effect rack macro / add new macro. When I double click to rename the macro, nothing happens

You can use the modulation panel once you have clicked the macro knob.
Or switch to Effect Rack edit mode by pressing Ctrl + E while on element of the EffectRack panel is selected

otristan · Post by **otristan** » Wed Apr 06, 2016 7:21 am

Musical Gym wrote:Any chance the automatic Pace installer could be a user choice instead of running each time we install an update?
I keep cancelling out of it since Pace is installed; during canceling, I never know if it's partially installing or what.

Pace installer install the latest version but do nothing if nothing has changed.
You usually would want the latest version especially as this may be required to launch the new build.
Better to keep it this way.

Diego_C · Post by **Diego_C** » Wed Apr 06, 2016 10:58 am

Good to know

Thanks a lot for answering, greets.

otristan wrote:
Diego_C wrote:
otristan wrote:@ErikH

Please download Falcon back.
Looks like a test have made its way to the release build.

My bad.
wops..sorry if I pop in, I downloaded the latest 1.1.1 but here on this post above you said it was a test build...how can I check if what I downloaded some hours ago is the definitive 1.1.1 or a wrong build :-/ ... ? I am on a limited connection so knowing if what I have downloaded is the correct one would save me half giga of re-download..
Thanks in advance
Diego
The regression was only in windows standalone version regarding soundcard with weird buffer size.
So if you don't have one of those, don't bother.

c_voltage · Post by **c_voltage** » Wed Apr 06, 2016 4:05 pm

Thanks for quick update.
Tested IRCAM Stretch in v1.1.1 (about crash), well it seems now it already completely fixed ) Tried with couple different wav's (differ khz\bit), no crash.

BTW, what about Trigger non-working issue in "Note OFF" mode for ADSR (called "Analog ADSR") envelope ? (about mentioned Sampleconstruct) It seems it without changes in 1.1.1, or this is properly analog ADSR behavior?

Sampleconstruct · Post by **Sampleconstruct** » Wed Apr 06, 2016 5:11 pm

Something relaxing for the evening with 3 Falcons and a limiter on the master output:

https://soundcloud.com/sampleconstruct/ ... con-sounds

otristan · Post by **otristan** » Wed Apr 06, 2016 6:07 pm

c_voltage wrote: BTW, what about Trigger non-working issue in "Note OFF" mode for ADSR (called "Analog ADSR") envelope ? (about mentioned Sampleconstruct) It seems it without changes in 1.1.1, or this is properly analog ADSR behavior?

There is no note off retrigger in Analog ADSR.
Not a bug per se but we may add this feature at some point, still you can easily use a regular ADSR instead.

Hope this clarifies things.

c_voltage · Post by **c_voltage** » Wed Apr 06, 2016 6:14 pm

otristan wrote:
c_voltage wrote: BTW, what about Trigger non-working issue in "Note OFF" mode for ADSR (called "Analog ADSR") envelope ? (about mentioned Sampleconstruct) It seems it without changes in 1.1.1, or this is properly analog ADSR behavior?
There is no note off retrigger in Analog ADSR.
Not a bug per se but we may add this feature at some point, still you can easily use a regular ADSR instead.

Hope this clarifies things.

Oh then ok. No, its not critical ofcourse (regarding exactly Analog ADSR type), main thing that this not bug, so all ok.

tonedef71 · Post by **tonedef71** » Wed Apr 06, 2016 6:37 pm

Does anybody have any news concerning when Ben might lift the moratorium on the creation of new company sub-forums at KVR?

UVI Falcon - v4 = 2026 released - rumors, ads, praise, kindergarden, auto-sampling and off-topic inside!