80s funk BBD type chorus plugins
- KVRAF
- 11162 posts since 16 Mar, 2003 from Porto - Portugal
Honestly, and although I like TAL Chorus and TAL U-NO-LX very much, I think that the Arturia Chorus Jun-6 is closer to the original.audiouser720 wrote: Wed Dec 23, 2020 8:12 am Sorry for the OT @fmr but out of the two (Arturia/TAL) which one do you find closer to your hardware Juno 60 (regardless the chorus)?
I love TAL for what it is and then I read this topic on gearslutz and this bloke goes absolutely mental on how shite the TAL is (in his opinion) because of the envelopes being poppy sounding just like your typical VST and nothing like the hardware.
I don’t own the hardware and would rather believe someone who does and actually designed presets for TAL. Also people compare it to 106 many times. So would you say Arturia or TAL is more accurate (without the chorus!)?
That doesn't mean TAL Chorus is useless, of course. I would dismiss those comments you quote.
Fernando (FMR)
-
- KVRist
- Topic Starter
- 128 posts since 26 May, 2020 from Norway
For me it took several hours before the license arrived. Until then the plugin was only in demo mode.foosnark wrote: Wed Dec 23, 2020 3:45 amIt's not active in your account yet -- when it is there should be a non-demo version you can install instead.Andywanders wrote: Wed Dec 23, 2020 3:16 am Installed but it's in demo mode. No activation button, just a "buy" button that opens a 404...
- KVRAF
- 8088 posts since 9 Jan, 2003 from Saint Louis MO
-
- Banned
- 1779 posts since 26 Aug, 2012
Primal Tap is good for bass if u want that retro chorus sound. put it in time mode and crank up the feedback to fatten. Also good on 808 kicks and snares
- KVRAF
- 5913 posts since 17 Aug, 2004 from Berlin, Germany
Great free gift! Manual mode with host sync, mix knob... everything you need is there
Sounds good even on mono sounds like bass.
Sounds good even on mono sounds like bass.
| Links-
- KVRist
- Topic Starter
- 128 posts since 26 May, 2020 from Norway
Thanks! Sounds nice and can't argue with freedremin wrote: Wed Dec 23, 2020 8:55 am and there's also free OSL Chorus which has been probably the most accurate Juno chorus ITB
You also made me aware of their Hex drum plugin which resembles those 80's Simmons electronic drums!
But I realize the VP-330 vocoder "ensemble" effect is what I'm after, and I just found out that Xils-lab have a 30% discount on all their products until January 15th!
There's a banner on their main page with the discount code, but in case it scrolls by, it's "HappyNewYear2021".
Good thing I waited to buy the Chor'X chorus plugin.
I might even get myself that VP-330 vocoder back (I sold mine probably25 years ago) in the form of their V+ plugin with that 30% discount (or their "analog string machines" bundle).
Their "Ensemble" effect appears to be identical to (not surprisingly) their VP-330 setting in Chor'X. Try the demo -it gives you an instant warm strings tyope sound from even the most basic synth sound!
PS: can someone please explain what the difference is between "iLok (iLok 1, 2, 3 and soft)" and "iLok USB-eLicenser"? It appears you can choose between the two types for Xils' plugins.
-
- KVRAF
- 2317 posts since 11 Mar, 2003
First off thanks for pointing me to the sale - I've been looking for a while and they didn't look as if they were going to have one.dynamo wrote: Wed Dec 30, 2020 6:44 pm PS: can someone please explain what the difference is between "iLok (iLok 1, 2, 3 and soft)" and "iLok USB-eLicenser"? It appears you can choose between the two types for Xils' plugins.
Do you have Cubase? If so you will have a USB eLicenser and may want to assign the serial key to that.
iLok 1, 2 and 3 are the USB dongle versions of iLok.
iLok (soft) is the PACE software that runs on your computer and you can assign it to that computer only.
--------------------------------------------------------------------------------------------------------------------
Also, not really sure it counts as a BBD chorus, but check out Plugin Alliance ADA STD-1.
-
- KVRist
- 99 posts since 28 Nov, 2020
I don't understand all the hype for the TAL plugins on internet,for me they all sound dead sterile,flat as hell.
I don't understand why the Acon Digital Multiply doesn't get more love on the other hand,this chorus sounds great and it is free!
It has some goodies such as an EQ and it more configurable than a Juno style chorus.
https://acondigital.com/products/multiply/
I don't understand why the Acon Digital Multiply doesn't get more love on the other hand,this chorus sounds great and it is free!
It has some goodies such as an EQ and it more configurable than a Juno style chorus.
https://acondigital.com/products/multiply/
-
- KVRist
- Topic Starter
- 128 posts since 26 May, 2020 from Norway
You're welcome. Glad to finally give something back hereMr Arkadin wrote: Wed Dec 30, 2020 7:24 pmFirst off thanks for pointing me to the sale - I've been looking for a while and they didn't look as if they were going to have one.dynamo wrote: Wed Dec 30, 2020 6:44 pm PS: can someone please explain what the difference is between "iLok (iLok 1, 2, 3 and soft)" and "iLok USB-eLicenser"? It appears you can choose between the two types for Xils' plugins.
yeah -everybody else appeared to have Black Friday/Christmas/New Year deals except them. Turns out patience pays off!
No, I opted for Tracktion Waveform as my DAW. As I'm new to DAWs in general I also like to use Garageband because it's so self-explantetory and .... just works!Do you have Cubase? If so you will have a USB eLicenser and may want to assign the serial key to that.
iLok 1, 2 and 3 are the USB dongle versions of iLok.
iLok (soft) is the PACE software that runs on your computer and you can assign it to that computer only.
So the first option uses a USB dongle which can be unplugged and used on any other computer which allows you to use the same plugins there?
Can you just transfer all those licenses to an empty USB flash-memory stick, or is this a special USB device you have to buy for this specific purpose?
So with the "soft" option you can use it with only one specific computer? And when you want to use it with another computer you first have to de-install the licenses, then install them all onto the new computer?
I assume my iLok-dependant plugins that I've purchased is of the "soft" license kind, where I've used the "iLok license manager" app to enter the license code and change them from demo versions to full versions. I haven't run into any issues with this, but raises the question if I'm dependant on an Internet connection each time I start up my DAW (with those plugins in use)?
And since I own two computers -can I use the same license on both of them, or would I have to transfer the license back/forth or need to buy an additional license?
Awesome! I'm going to try out their demo first, but I have a feeling the Xils lab Chor'X is the one to go for, for that Roland "Ensemble" sound. Truth be told, that effect was half the vocoder sound of the VP-330 IMHO!Also, not really sure it counts as a BBD chorus, but check out Plugin Alliance ADA STD-1.
-
- KVRist
- Topic Starter
- 128 posts since 26 May, 2020 from Norway
Yeah, they have some nice stuff (I've installed both their free plugins: Digital Multiply which you mentioned here, and Verberate Basic which is a simple hall reverb).Cro-magnon wrote: Wed Dec 30, 2020 7:47 pm I don't understand why the Acon Digital Multiply doesn't get more love on the other hand,this chorus sounds great and it is free!
It has some goodies such as an EQ and it more configurable than a Juno style chorus.
https://acondigital.com/products/multiply/
I know this shouldn't matter when selecting a plugin, but to me the visual aesthetics mean a lot as well: if a plugin is easy on the eyes, uncomplicated and professional looking I tend to prefer those instead of the more complex and advanced ones with a "messy" and complicated user interface.
On that note I've purchased a handful of plugins from Kilohearts during their last 50% sale (among them their ensemble plugin which isn't quite the VP-330 ensemble I've been looking for, but very nice nonetheless). The 50% sale only lasts till 1st of January.
-
- KVRAF
- 2317 posts since 11 Mar, 2003
No, both eLicenser and iLok use their own proprietary USB dongle that you have to buy separately, that's why many people don't like this way of copy protecting plug-ins.dynamo wrote: Wed Dec 30, 2020 9:35 pm So the first option uses a USB dongle which can be unplugged and used on any other computer which allows you to use the same plugins there?
Can you just transfer all those licenses to an empty USB flash-memory stick, or is this a special USB device you have to buy for this specific purpose?
I've never had to uninstall so I'm not sure of the details on uninstalling and installing on a different computer. There may be cases where some manufacturers allow multiple licences.dynamo wrote: Wed Dec 30, 2020 9:35 pm So with the "soft" option you can use it with only one specific computer? And when you want to use it with another computer you first have to de-install the licenses, then install them all onto the new computer?
I think once you've run the manager software and assigned it to your PC that's it, I don't think it 'phones home' every time you launch or anything like that (someone will correct if that's wrong). There is an iLok Cloud version which does need a constant internet connection, that's why I don't use Cloud: can't 'phone home', can't use your plug-ins.dynamo wrote: Wed Dec 30, 2020 9:35 pm I assume my iLok-dependant plugins that I've purchased is of the "soft" license kind, where I've used the "iLok license manager" app to enter the license code and change them from demo versions to full versions. I haven't run into any issues with this, but raises the question if I'm dependant on an Internet connection each time I start up my DAW (with those plugins in use)?
And since I own two computers -can I use the same license on both of them, or would I have to transfer the license back/forth or need to buy an additional license?
As I say, some manufacturers will probably allow two-computer use as it is a fairly common request. I guess you'd have to check each individual manufacturers' Ts & Cs.
-
Funkybot's Evil Twin Funkybot's Evil Twin https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=116627
- KVRAF
- 12504 posts since 16 Aug, 2006
I believe he does testing and sound design for Arturia.Chapelle wrote: Wed Dec 30, 2020 10:15 pmDo you work for Arturia in some way? You seem to praise and defend them in basically every Arturia thread. Doesn't seem like you're a normal customer.fmr wrote: Wed Dec 23, 2020 9:04 am Honestly, and although I like TAL Chorus and TAL U-NO-LX very much, I think that the Arturia Chorus Jun-6 is closer to the original.
That doesn't mean TAL Chorus is useless, of course. I would dismiss those comments you quote.
- KVRAF
- 11162 posts since 16 Mar, 2003 from Porto - Portugal
Yes, I do testing and sound design for them. I also do that for other companies as well. AS do many other guys around here (collaborating with companies as beta testers, etc.).Chapelle wrote: Wed Dec 30, 2020 10:15 pmDo you work for Arturia in some way? You seem to praise and defend them in basically every Arturia thread. Doesn't seem like you're a normal customer.fmr wrote: Wed Dec 23, 2020 9:04 am Honestly, and although I like TAL Chorus and TAL U-NO-LX very much, I think that the Arturia Chorus Jun-6 is closer to the original.
That doesn't mean TAL Chorus is useless, of course. I would dismiss those comments you quote.
That doesn't mean I can't be objective, I defend Arturia when I think it's being attacked unfairly and unjustifiably. I do the same for other companies which I am not related with. Actually, in the post you quote, I was defending TAL Chorus
Fernando (FMR)
