Phase Plant released
-
- KVRist
- 33 posts since 15 Apr, 2013 from Sweden
Kilohearts here. There is a problem with the installer that shipped with the CM issue. It gives you licenses on Win but fails on Mac I think. Email support@kilohearts.com and we'll sort you out.
-
- KVRist
- 33 posts since 15 Apr, 2013 from Sweden
The amount of modulation applied rounds to whole numbers when displayed, but they are actually saved as more precise values. Try right clicking the thing you are modulating and click the modulation amount, then type "0.5". It will still show as 1% but listen to the results. We are changing this to be more understandable in the next big feature update.SLiC wrote: Sat Feb 13, 2021 12:12 pm Anyone know if its possible to modulate just the 'cents' of an oscillator pitch? Seems to modulate the semi and even with the smallest amount its way too much for just slight drift?
-
- KVRAF
- 2296 posts since 23 May, 2012 from London
Thanks for the clarification.Per Salbark wrote: Wed Feb 17, 2021 7:46 am Kilohearts here. There is a problem with the installer that shipped with the CM issue. It gives you licenses on Win but fails on Mac I think. Email support@kilohearts.com and we'll sort you out.
Always Read the Manual!
-
- KVRAF
- 12095 posts since 2 Dec, 2004 from North Wales
Hey thanks for responding- the next big feature update sounds interesting, any hintsPer Salbark wrote: Wed Feb 17, 2021 8:00 amThe amount of modulation applied rounds to whole numbers when displayed, but they are actually saved as more precise values. Try right clicking the thing you are modulating and click the modulation amount, then type "0.5". It will still show as 1% but listen to the results. We are changing this to be more understandable in the next big feature update.SLiC wrote: Sat Feb 13, 2021 12:12 pm Anyone know if its possible to modulate just the 'cents' of an oscillator pitch? Seems to modulate the semi and even with the smallest amount its way too much for just slight drift?
X32 and 24C mixers, S88MK3, Live + PUSH 3, Osmose, RedShift 6, Pro3, S4, Tempera, Syntakt, Digitone, OP1-F, OPXY, TR-1000, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 12095 posts since 2 Dec, 2004 from North Wales
Reverser, Pitcher and Trance Gate for £3.50!
Just a heads up that the free Kilohearts plugs are still available on Computer Music Autumn 2018 for a few quid....the Windows installer worked fine and I got 3 great snap ins for almost free .
I believe you can also get Slice EQ for free (£3.50) on another issue but I already have it...
Too good to miss if you don't have these snaps....lowers the cost of getting the bundles as well...soon I will be in all
Just a heads up that the free Kilohearts plugs are still available on Computer Music Autumn 2018 for a few quid....the Windows installer worked fine and I got 3 great snap ins for almost free .
I believe you can also get Slice EQ for free (£3.50) on another issue but I already have it...
Too good to miss if you don't have these snaps....lowers the cost of getting the bundles as well...soon I will be in all
X32 and 24C mixers, S88MK3, Live + PUSH 3, Osmose, RedShift 6, Pro3, S4, Tempera, Syntakt, Digitone, OP1-F, OPXY, TR-1000, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 2296 posts since 23 May, 2012 from London
Installer worked for me too (Windows 10)SLiC wrote: Thu Feb 18, 2021 6:12 pm Reverser, Pitcher and Trance Gate for £3.50!
Just a heads up that the free Kilohearts plugs are still available on Computer Music Autumn 2018 for a few quid....the Windows installer worked fine and I got 3 great snap ins for almost free .
I believe you can also get Slice EQ for free (£3.50) on another issue but I already have it...
Too good to miss if you don't have these snaps....lowers the cost of getting the bundles as well...soon I will be in all![]()
Always Read the Manual!
-
- KVRAF
- 12095 posts since 2 Dec, 2004 from North Wales
--Feature Requests--
Any other ideas, we know they are working on a new update and this thread seem pretty quiet
Phase Plant
Separate modulation destinations for 'semi' and 'cents'
Modulator naming/grouping (same as generators) - essential for me, gets messy quickly as it is!
Slower rise times on modulators (or perhaps a function generator?)
Modulation overview page/view?
Dedicated sequencing/arp (not just the LFO tools) - I would, also like the sequencer to have a gate option/play notes without a key press needed...Rhythm/gate generators that do Euclidean etc (more Eurorack like sequencing)
Quantiser (great after LFO's etc for making things musical)
SnapIns
Amp/Valve sim
More reverb types? (convolution, spring etc)
Leslie? (you can probably make this but its an fx I use quite often on synths)
It would be nice if 'Tape Stop' did more than stop start (when 'running' use it as a tape effect lofi, wow, flutter, saturation etc) - just rename it 'Tape' and maybe throw in tape delay
Any other ideas, we know they are working on a new update and this thread seem pretty quiet
Phase Plant
Separate modulation destinations for 'semi' and 'cents'
Modulator naming/grouping (same as generators) - essential for me, gets messy quickly as it is!
Slower rise times on modulators (or perhaps a function generator?)
Modulation overview page/view?
Dedicated sequencing/arp (not just the LFO tools) - I would, also like the sequencer to have a gate option/play notes without a key press needed...Rhythm/gate generators that do Euclidean etc (more Eurorack like sequencing)
Quantiser (great after LFO's etc for making things musical)
SnapIns
Amp/Valve sim
More reverb types? (convolution, spring etc)
Leslie? (you can probably make this but its an fx I use quite often on synths)
It would be nice if 'Tape Stop' did more than stop start (when 'running' use it as a tape effect lofi, wow, flutter, saturation etc) - just rename it 'Tape' and maybe throw in tape delay
Last edited by SLiC on Sun Feb 21, 2021 12:25 pm, edited 2 times in total.
X32 and 24C mixers, S88MK3, Live + PUSH 3, Osmose, RedShift 6, Pro3, S4, Tempera, Syntakt, Digitone, OP1-F, OPXY, TR-1000, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 12095 posts since 2 Dec, 2004 from North Wales
PS- I recommend the Neptunion sound pack which is now just $5 https://gumroad.com/sasounds#tLodUv
Includes samples/wavetables and skins...I learned a lot from it!
Includes samples/wavetables and skins...I learned a lot from it!
X32 and 24C mixers, S88MK3, Live + PUSH 3, Osmose, RedShift 6, Pro3, S4, Tempera, Syntakt, Digitone, OP1-F, OPXY, TR-1000, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!
- KVRian
- 1113 posts since 8 Oct, 2019
- wider LFO range, it annoys me slightly that it only goes down to 10hz.
- renaming of mod sources
- more audio rate destinations, like in Dune 3, maybe in combination with a "high CPU" setting
- more filters obviously
For many things there are work arounds with Phase Plant. For example you can create a quantized mod source, if you create a stepped wavetable in the editor in the scale you want, turn the Harmonic to 0 and modulate the Phase. But I definitely wish every synth would have an easy to use quantize function like Hive 2 or Pigments.
- renaming of mod sources
- more audio rate destinations, like in Dune 3, maybe in combination with a "high CPU" setting
- more filters obviously
For many things there are work arounds with Phase Plant. For example you can create a quantized mod source, if you create a stepped wavetable in the editor in the scale you want, turn the Harmonic to 0 and modulate the Phase. But I definitely wish every synth would have an easy to use quantize function like Hive 2 or Pigments.
-
- KVRist
- 91 posts since 3 Jul, 2010 from the A
Quantize is practically essential
I’d also like to see a function generator
Grouping of modulators
Distinct controls for semi and cent, also essential
More improved filters, in the generator section preferably
All, save for maybe the function generator, are far more important to me than something like granular, which I can do in more than a handful of other synths already
I’d also like to see a function generator
Grouping of modulators
Distinct controls for semi and cent, also essential
More improved filters, in the generator section preferably
All, save for maybe the function generator, are far more important to me than something like granular, which I can do in more than a handful of other synths already
