The Synthmaster 3 Thread
-
- KVRAF
- 6659 posts since 14 Nov, 2006 from Ankara, Turkey
Hi guys, after a long break, here's the latest update for SynthMaster 3: Revision 14982. With this update, we are getting really close to a beta. We still have more skins/presets/samples and also the demo version to add before declaring "beta" status (hopefuly in 2 weeks!)
Here's the change log:
1. NEW: Added default Tranquil Blue skin
2. NEW: Added "Separate sliced wave files into multiple regions" functionality to sample editor
3. NEW: Added "Bass Guitar" to factory sample library
3. FIX: Multiline textbox values are not updated correctly
4. FIX: SynthMaster 3 crashes when user deletes som layers in a multi-layer preset and loads it back later
5. FIX: SynthMaster 3 doesn't load preset headers correctly
6. FIX: When Zoom ratio is set to "Off" for Waveform Spectrum view, the display is not correct
7. FIX: When cubic is chosen for wavetable interpolation type, wavetable data is not calculated correctly
8. FIX: Wave index parameter doesn't change when user clicks on a wavetable keyframe
9. FIX: Sample transpose parameter has not effect
10.FIX: Factory sample volumes should be normalized
11.FIX: Waveforms are not refreshed when user updates a waveform
12.FIX: Wavetables are not refreshed when user updates a wavetable
13.FIX: Multi-samples are not refreshed when user updates a multi-sample
Enjoy!
Here's the change log:
1. NEW: Added default Tranquil Blue skin
2. NEW: Added "Separate sliced wave files into multiple regions" functionality to sample editor
3. NEW: Added "Bass Guitar" to factory sample library
3. FIX: Multiline textbox values are not updated correctly
4. FIX: SynthMaster 3 crashes when user deletes som layers in a multi-layer preset and loads it back later
5. FIX: SynthMaster 3 doesn't load preset headers correctly
6. FIX: When Zoom ratio is set to "Off" for Waveform Spectrum view, the display is not correct
7. FIX: When cubic is chosen for wavetable interpolation type, wavetable data is not calculated correctly
8. FIX: Wave index parameter doesn't change when user clicks on a wavetable keyframe
9. FIX: Sample transpose parameter has not effect
10.FIX: Factory sample volumes should be normalized
11.FIX: Waveforms are not refreshed when user updates a waveform
12.FIX: Wavetables are not refreshed when user updates a wavetable
13.FIX: Multi-samples are not refreshed when user updates a multi-sample
Enjoy!
You do not have the required permissions to view the files attached to this post.
Works at KV331 Audio
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
-
- KVRist
- 152 posts since 9 Nov, 2012
In Cubase 13 (Windows 11) this latest version has skyrocketed the CPU consumption, the previous one consumed nothing. I have tested in Studio One 6 and this DAW does not have this problem. I have tested the vst3 version
-
- KVRist
- 125 posts since 9 Oct, 2019
Will the beta include granular synthesis?
-
- KVRAF
- 6659 posts since 14 Nov, 2006 from Ankara, Turkey
I am afraid not. I am hoping to add that either before the official release or in our v3.1 update.
Works at KV331 Audio
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
-
- KVRAF
- 6659 posts since 14 Nov, 2006 from Ankara, Turkey
Hi guys, another update for SynthMaster 3 (rev 14990). Has critical bug fixes:
1. FIX: SynthMaster 3 freezes when user assigns a modulation source more than once to a parameter
2. FIX: SynthMaster 3 might crash when user switches a preset and presses a modulation source button
3. FIX: SynthMaster 3 might crash when a VA Oscillator is running with the following settings: Engine Quality = Best, Engine Buffer Size = XLarge
4. FIX: Wavetable is not updated correctly when Window Length parameter of the file source is changed
5. FIX: Saving global midi mappings corrupts SynthMaster 3 config file
1. FIX: SynthMaster 3 freezes when user assigns a modulation source more than once to a parameter
2. FIX: SynthMaster 3 might crash when user switches a preset and presses a modulation source button
3. FIX: SynthMaster 3 might crash when a VA Oscillator is running with the following settings: Engine Quality = Best, Engine Buffer Size = XLarge
4. FIX: Wavetable is not updated correctly when Window Length parameter of the file source is changed
5. FIX: Saving global midi mappings corrupts SynthMaster 3 config file
Works at KV331 Audio
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
- KVRist
- 73 posts since 23 Mar, 2024
Thanks heapskv331 wrote: ↑Fri Mar 29, 2024 12:18 pm Hi guys, another update for SynthMaster 3 (rev 14990). Has critical bug fixes:
1. FIX: SynthMaster 3 freezes when user assigns a modulation source more than once to a parameter
2. FIX: SynthMaster 3 might crash when user switches a preset and presses a modulation source button
3. FIX: SynthMaster 3 might crash when a VA Oscillator is running with the following settings: Engine Quality = Best, Engine Buffer Size = XLarge
4. FIX: Wavetable is not updated correctly when Window Length parameter of the file source is changed
5. FIX: Saving global midi mappings corrupts SynthMaster 3 config file
Btw; how far are we to see release candidate?
Seems near perfecto now
-
- KVRian
- 1070 posts since 3 Jan, 2020
I tried the latest version (Rev 14990) and it's still not working in Bitwig. I tired setting the parameter and cc lag to 0ms, but it didn't make a difference.
I would appreciate it if you could find a solution.
-
- KVRAF
- 6659 posts since 14 Nov, 2006 from Ankara, Turkey
Did you change the global setting or preset setting? If global setting is not "Preset", the global setting is used.
Works at KV331 Audio
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
-
- KVRian
- 1070 posts since 3 Jan, 2020
I had set both to 0ms to be safe. It's so weird that SynthMaster does this. None of my other synths behave that way.
Are you maybe reporting all parameter values to the host every time the GUI opens?
-
RoadCrewWorker RoadCrewWorker https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=428418
- KVRer
- 26 posts since 23 Oct, 2018
Yes, 0xAn midi events. Here's a min setup of Launchpad X pad pressure going into VST3/2 basic "saw-wave into filter, cutoff modulated by MIDI->Poly Aftertouch" patch: (sadly the kvr forums dont let me attach reaper project files) The bottom VST2 version works as expected, while the VST3 version always remains at max (in both the visual indicators as well as actual modulation).kv331 wrote: ↑Thu Mar 21, 2024 8:54 amWhat are PAT events ? Poly aftertouch ? Let me test with Roli SeaboardRoadCrewWorker wrote: ↑Thu Mar 21, 2024 7:27 am I'm liking 3 a lot so far from my few months of testing, but all synthmaster VST3 versions (One, 2, and lastest 3) still can't handle PAT events and modulation, so im mostly sticking to VST2 for now.
Same behavior for SM-One, SM2, or the same setup in BitWig instead of Reaper. Other VST3i expressive synths like SurgeXT behave as expected in either DAW.
e: this is on the latest downloadable build 14990
You do not have the required permissions to view the files attached to this post.
-
- KVRian
- 1012 posts since 24 Sep, 2021
Why not to postpone the release and make a proper 3 with granular?
Delayed synth is just delayed synth, but synth that came too early will always be the one that came too early with bugs and janks.
When it comes to material things - judge the book by its cover.
-
- KVRAF
- 6659 posts since 14 Nov, 2006 from Ankara, Turkey
Let me be totally frank with you: We are running out of money. Last year was a loss for us, and so far this year is as well. If enough users supported us and upgraded to SynthMaster 3 already while it is in alpha/beta stage, then I would be totally comfortable with a delaying the release. But right now, we can not afford that...Lbdunequest wrote: ↑Thu Apr 04, 2024 3:49 pm
Why not to postpone the release and make a proper 3 with granular?
Works at KV331 Audio
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
-
- KVRian
- 1012 posts since 24 Sep, 2021
Im sorry to hear that and thank you for being honest.kv331 wrote: ↑Thu Apr 04, 2024 4:58 pmLet me be totally frank with you: We are running out of money. Last year was a loss for us, and so far this year is as well. If enough users supported us and upgraded to SynthMaster 3 already while it is in alpha/beta stage, then I would be totally comfortable with a delaying the release. But right now, we can not afford that...Lbdunequest wrote: ↑Thu Apr 04, 2024 3:49 pm
Why not to postpone the release and make a proper 3 with granular?
Personaly im afraid to jump in to SM3, because of how janky SM2 feels, just small details makes it janky. For example:
1. Synth is loaded with presets but no distortion modes/presets when you can actually save them
2. Effect section, when everywhere you have to press left mouse button to select or activate, BUT to select effects you have to press right button, thats so inconsisten
3. Then in osc section when you navigate from osc 1 to osc 2, OSC and VOICE tab sizes are inconsistent
4. Category names overlapping
I saw more of these small things just cant pin point, but overal expierience makes it feeling like unfinished, unpolished product. As example, ZebraHZ, its such an old product, but its really polished. Synthmaster 2 is really more powerful and better sounding synth in my opinion, but ZebraHZ is the one making me more comfortable to use, just because it has no jank.
As there is saying "devil is in the details".
Ok granular can come later, personaly i dont care about granular, but please polish the synth, i think you will do yourself a favor