Is this solved in version 2.2 ? I dont want to download and have that mess again if its not been confirmed to be solved.- the standalone version (which at least IS installed) dont fit on the screen no matter which resolution I choose, that means the top 2 or three menue lines could just not be seen, so, just useless
- I dont even know IF the vst is installed (I have chosen vst 2 64 bit) cause it is in none of the pathes mentioned in the user manual (not in Program Files\Steinberg\VSTPlugins\Vaporizer2 not in Program Files (x86)\Steinberg\VSTPlugins\Vaporizer2)
LAUNCH! VAST Dynamics - Vaporizer2 - Hybrid Wavetable Additive / Subtractive Synthesizer / Sampler / Workstation
-
- KVRAF
- 1562 posts since 13 Jan, 2014
- KVRist
- Topic Starter
- 213 posts since 5 Jan, 2015 from Germany
Hello, for the best of my knowledge the first issue is solved. But I dont have a clue for the second one. Maybe it is due to write permissions for folders. Have you tried to run the installer as admin?tatanka wrote: ↑Wed Mar 20, 2019 12:12 pmIs this solved in version 2.2 ? I dont want to download and have that mess again if its not been confirmed to be solved.- the standalone version (which at least IS installed) dont fit on the screen no matter which resolution I choose, that means the top 2 or three menue lines could just not be seen, so, just useless
- I dont even know IF the vst is installed (I have chosen vst 2 64 bit) cause it is in none of the pathes mentioned in the user manual (not in Program Files\Steinberg\VSTPlugins\Vaporizer2 not in Program Files (x86)\Steinberg\VSTPlugins\Vaporizer2)
-
- KVRAF
- 1562 posts since 13 Jan, 2014
Usually I ever do this, but I will give it a try if at least I can run the standalone version to see if I could do anything with it at all.Have you tried to run the installer as admin?
One question to the installation: are the factory presets included or do I have to download them in the separate link ?
- KVRist
- Topic Starter
- 213 posts since 5 Jan, 2015 from Germany
They are included and can be selected / unselected during installation. But there are more free presets and wavetables downloadable on the webpage.tatanka wrote: ↑Wed Mar 20, 2019 12:27 pmUsually I ever do this, but I will give it a try if at least I can run the standalone version to see if I could do anything with it at all.Have you tried to run the installer as admin?
One question to the installation: are the factory presets included or do I have to download them in the separate link ?
- KVRist
- Topic Starter
- 213 posts since 5 Jan, 2015 from Germany
https://www.kvraudio.com/news/vast-dyna ... v2-2-44607
VAST Dynamics has released version 2.2 of Vaporizer2, a hybrid wavetable additive / subtractive VST/AU synthesizer / sampler workstation featuring an alias-free high-performance wavetable sound engine with low system CPU resource usage.
Changes:
VAST Dynamics has released version 2.2 of Vaporizer2, a hybrid wavetable additive / subtractive VST/AU synthesizer / sampler workstation featuring an alias-free high-performance wavetable sound engine with low system CPU resource usage.
Changes:
- New factory preset bank with 150 presets.
- New factory wavetable bank with more than 200 wavetables.
- New features including MIDI learn, channel pressure / aftertouch, save preset as FXP, FLS files.
- Improved installer for Mac OS X.
- Added SSE compatibility versions for systems that do not support AVX.
- Stability, performance / CPU, usability improvements and several bug fixes.
-
- KVRian
- 880 posts since 21 May, 2018
150 presets only with 2.2 update?
even parawave audio rapid has 1000 presets as factory....
you should provide more factory sounds....
demo sounds are really tiny, absolutely no thickness in sounds...sounds like 80s-90s
really dissapointed. plus it looks like serum but there is thousands of presets for serum but nothing for this synth...
not impressed at all, looks like one guy company, will not last long
even parawave audio rapid has 1000 presets as factory....
you should provide more factory sounds....
demo sounds are really tiny, absolutely no thickness in sounds...sounds like 80s-90s
really dissapointed. plus it looks like serum but there is thousands of presets for serum but nothing for this synth...
not impressed at all, looks like one guy company, will not last long
-
- KVRian
- 653 posts since 13 May, 2017 from Virginia
Can you reorder and choose more effects on one bus? From the mod matrix it doesn't appear that I can send an MSEG to a distortion on a particular bus. The FX send on the matrix should probably only show enabled effects.
Send to FX1.EQ[1].
Send to FX1.EQ[2]
Still playing around with it but missing those features already.
Send to FX1.EQ[1].
Send to FX1.EQ[2]
Still playing around with it but missing those features already.
- KVRist
- Topic Starter
- 213 posts since 5 Jan, 2015 from Germany
This is internally prepared. Only the UI part is missing and it is on top of the backlog for next update.functionform wrote: ↑Wed Mar 20, 2019 1:13 pm Can you reorder and choose more effects on one bus? From the mod matrix it doesn't appear that I can send an MSEG to a distortion on a particular bus. The FX send on the matrix should probably only show enabled effects.
Send to FX1.EQ[1].
Send to FX1.EQ[2]
Still playing around with it but missing those features already.
-
- KVRian
- 653 posts since 13 May, 2017 from Virginia
edit: nvm, must have been a bad setup, not so bad reverb after all
Last edited by functionform on Wed Mar 20, 2019 1:37 pm, edited 4 times in total.
-
- KVRian
- 653 posts since 13 May, 2017 from Virginia
YOU ARE AN ANGEL. Some of these presets are gorgeous. I can already tell this is going to be a supremely valuable purchase for me.vastdynamics wrote: ↑Wed Mar 20, 2019 1:19 pm
This is internally prepared. Only the UI part is missing and it is on top of the backlog for next update.
-
Distorted Horizon Distorted Horizon https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=392076
- Banned
- 3882 posts since 17 Jan, 2017 from Planet of cats
Time spent whining, you could learn to make your own..deejay2 wrote: ↑Wed Mar 20, 2019 1:08 pm 150 presets only with 2.2 update?
even parawave audio rapid has 1000 presets as factory....
you should provide more factory sounds....
demo sounds are really tiny, absolutely no thickness in sounds...sounds like 80s-90s
really dissapointed. plus it looks like serum but there is thousands of presets for serum but nothing for this synth...
not impressed at all, looks like one guy company, will not last long
- KVRist
- Topic Starter
- 213 posts since 5 Jan, 2015 from Germany
There are additional 650+ free presets linked in the download section on the website.
Sorry to hear that you don’t like it. If you have purchased a license, PM me in case you want to get a refund.
- KVRian
- 1353 posts since 31 Aug, 2007 from wales
crashed ableton 10 on mac high sierra as soon as I dropped it into a track
rinse and repeat...
dave
rinse and repeat...
dave
- KVRist
- Topic Starter
- 213 posts since 5 Jan, 2015 from Germany
Do you have an AVX machine? If not, you need to use the SSE version.
-
- KVRian
- 653 posts since 13 May, 2017 from Virginia
A few other items from a semi-frequent oscer please!:
1. Max pitch modulation should be about 6 octaves (I think that's enough) This is for percussive emphasis and a huge part of attackiness. Right now its only like 13 semitones which is not nearly enough.
2. Ability to disable keytrack, and set pitch for the 3 oscs.
These probably seem like not really necessary, but they are very helpful for sound design as example in these two videos (use link, youtube embedding doesn't start at right time):
https://www.youtube.com/watch?v=tPRBIBl5--w&t=1m (kick, pitch env example)
https://www.youtube.com/watch?v=qi5fbezyzio&t=2m20s (cymbals/hi hats manual pitch example)
outside of basic drum patches, they would be incredible features for sound design.
1. Max pitch modulation should be about 6 octaves (I think that's enough) This is for percussive emphasis and a huge part of attackiness. Right now its only like 13 semitones which is not nearly enough.
2. Ability to disable keytrack, and set pitch for the 3 oscs.
These probably seem like not really necessary, but they are very helpful for sound design as example in these two videos (use link, youtube embedding doesn't start at right time):
https://www.youtube.com/watch?v=tPRBIBl5--w&t=1m (kick, pitch env example)
https://www.youtube.com/watch?v=qi5fbezyzio&t=2m20s (cymbals/hi hats manual pitch example)
outside of basic drum patches, they would be incredible features for sound design.