BCF2000 & BCR2000 Firmware error...

[pro_bacteria]

I got a BCF2000 and a BCR2000 to use with tracktion 2.

Got them used... when they boot up they show 1.03 both.


So I decided upgrade them...

I got the update tool from behringer... got the midi usb drivers... got the usb connection with my bcf2000 and got this with the 1.10:

BCF2000 update file selected.
Checking MidiPorts...
Writing Block 1/17 ...timeout ERROR
The hardware is not longer conected to your computer
--------------------------------
DANGER!!!
DO NOT SWITCH OFF YOUR B-CONTROL NOW
There were errors while flashing the OS.
Retry it now!
If you do switch off now your B-Control is only refreshable with a standard MIDI Interface but not working with USB anymore

Then when I try with the 1.07 one.. I got no communication. I tried the 1.07 at first.

What should I do you think ?

Thanks

Pro_bacteria

[djsubject]

connect via the midi port to the b-controll software & update it that way (dont even plug the usb,s in)

cant rember if the bc*2000 will need to be in midi mode insted of usb mode

Subz

[pro_bacteria]

Hehe I tried before with USB and it says "upgrade to 1.05 your version is to old..." when I it the scan button.

Wow... I think going from 1.03 to 1.07 or 1.10 is bad for it. I should go 1.03, then 1.04 or 1.05 then go for 1.07 to 1.10.

Could somebody send me the old files please ? I can't find them anywhere on the behringer site.

My e-mail address is plg79@hotmail.com

I appreciate it... thanks...

And if it not work... I will have to buy a midi card to try without the USB mode ?

Pro_bacteria

[djsubject]

did you get all the tools from here?

http://www.behringer.com/05_support/bc_ ... m?lang=ENG

i went straight to the 1.07 from new, although i do rember having to try a few times & it gave me a error msg saying it dident work when it had worked



good luck

Subz

[pro_bacteria]

Yep I got all of those... tried directly midi without the usb mode... S4 like they said.

It says : "memory can't be read & written 1xe0384820 blablabla"

Well... it seem I'm gonna hate those used BCx2000...

When you got them where you on 1.03 firm ?

I will try on another computer, sometimes application give different result on differents setups...

It there another way to flash them with another midi application protocol ?

Thanks for helping me I appreciate it

pro_bacteria

[djsubject]

cant rember if it was 1.02 or 1.03

i got mine from the shop about 5 months ago

hopfully trying on another system will sort it for you,

also i know the latest jave runtime & the bc*2000 software dont get on that well

try rolling backto jarva 4.** the v5 dosent work when it comes to uploading to the bc*2000

appart from that i'm out of idears

Subz

[pro_bacteria]

I will try with midi OX and Send SX.

pro_bacteria

[pro_bacteria]

It worked the first time with MIDI OX...

Thanks for your attention...

pro_bacteria

[djsubject]

[pro_bacteria]

Just to say that the BCFVIEW + BCF2000+ TRACKTION2 + MACKIE EMULATION = relay worth it!!!!

Wow!!!! I REALY LIKE IT!!!! FADER FEALING!!! Back to the real world thanks a lot... motorized faders...



Will use soon my sleeping BCR2000... does it worth it too with tracktion 2 ? Can it works with the 4 band EQ ?

pro_bacteria

[djsubject]

Will use soon my sleeping BCR2000... does it worth it too with tracktion 2 ? Can it works with the 4 band EQ ?

pro_bacteria

seeing as you have the mcu emulation you can use the bcr to lock rotery controlls to any vst paramater you want & that = much much fun

Subz

[pro_bacteria]

I use the Mackie the MC-C emulation. What MCU exactly mean ?

And I don't know wich setup to use to put the BCR in the midi loop. I Mean... I don't use the usb input on the bcf to drive tracktion. I use an edirol usb to midi interface linked to my bcf. So the bcf works in midi only mode... I will for shure discover wich S1 to S4 setup to use to get both working on the same midi interface (edirol UM-1)... BCF + BCR. Then I will discover wich setup to use to get the BCR over VST.

pro_bacteria

[SuitcaseOfLizards]

Thanks for posting your experience! I was thinking about saving up for a couple of the Behringer control surfaces and I'm sold now!