KVR Audio

Lunch Money · Post by **Lunch Money** » Thu Sep 29, 2005 10:16 pm

That's a good guess. If it shows up as an input and is pointed at a track containing a VSTi, and THAT track goes to an audio output...

Then you've pretty much done everything T is capable of doing.

C00kie · Post by **C00kie** » Thu Sep 29, 2005 10:18 pm

A common mistake is to connect midi output to output and input to input: this does not work. You have to connect the midi output of the keyboard to midi input of the Delta.

Check ??

Jack Halyard · Post by **Jack Halyard** » Thu Sep 29, 2005 10:26 pm

Thanks folks. Cookie, the cables are definitely hooked up correctly but thanks for mentioning that.

Cheeso · Post by **Cheeso** » Thu Sep 29, 2005 10:31 pm

Does T2 require you to "enable record" on midi tracks or something?

Lunch Money · Post by **Lunch Money** » Thu Sep 29, 2005 10:34 pm

As soon as you point the device to the track, it is armed for record; or in the per-track view, there's an "R" button that must be enabled.

Cheeso · Post by **Cheeso** » Fri Sep 30, 2005 1:08 am

Are you turning on the PC88 before or after you start up T2?

Jack Halyard · Post by **Jack Halyard** » Fri Sep 30, 2005 3:59 pm

After.

Sascha Franck · Post by **Sascha Franck** » Fri Sep 30, 2005 4:23 pm

As you are listening to some "echoed piano", this is most likely the default channel 1, preset 1 sound of XPs internal GM MIDI synth (the delay is normal for it, don't worry).
So, to me it seems your MIDI in is all OK. I won't be able to help you with Tracktions internal connections as I don't use it, but I'm sure the solution should be fairly easy.

Sascha Franck · Post by **Sascha Franck** » Fri Sep 30, 2005 4:25 pm

Oh, and make sure to turn your MIDI keyboard on before you start Tracktion. Some keyboards are sending some "total reset" messages on powering them on, which might add to the confusion.

Jack Halyard · Post by **Jack Halyard** » Sat Oct 01, 2005 12:35 am

Allright my friends, here's the latest. When I right click on the midi input icon for the track it tells me "this midi device is being used as an external controller and will not be receiving normal midi."
What's my next step?
Thanks

Lunch Money · Post by **Lunch Money** » Sat Oct 01, 2005 12:39 am

Hrm. You didn't by chance touch the "external controllers" settings page, did you? If so, make sure that both drop down windows say < no device selected > for the Control Universal AND the C4. Unless you have one of those devices, or a device that is able to emulate them, that page doesn't mean anything. Since you're talking about a Kurzweil keyboard, I assure you that that page should mean nothing and shouldn't be disturbed.

Greg

Jack Halyard · Post by **Jack Halyard** » Sat Oct 01, 2005 5:32 pm

SUCCESS!!!!!!!!!!!!!!!Thank you so much, Greg. That solved the problem immediately. Man, I am so glad to be a member of this forum.
thanks to everyone for all the advice.

Lunch Money · Post by **Lunch Money** » Sat Oct 01, 2005 6:30 pm

Glad to be of service.

Recording midi