KVR Audio

ianweb123 · Post by **ianweb123** » Mon Dec 05, 2005 7:42 pm

Another plug-in to boost the profile of UGO as a quality developer, very well done..

TotcProductions · Post by **TotcProductions** » Mon Dec 05, 2005 8:56 pm

ugo wrote:hi folks,

im really happy you are all enjoying metallurgy!

TotcProductions wrote:It sounds great on guitars! I had some guitar presets included in the set i did for this release....i don't think they made it to the final package though.....
they did make it into the release (and they are great), the category on theose patches was just renamed to LED because i was trying to keep things simple and because they work very well on other higher pitched/lead instruments...just as the BAS category covers both bass guitars and synth basses, and the PAD category covers normal pads as well as drones.

i just didnt want to end up with too may seperate categories (there's already 11 of them) and i wanted to encourrage people to try a wider range of presets than they might otherwise if the categories were all very instrument specific.

-ugo

aaaah, understood.

thanx ugo.

peace!

frank

davidlinn · Post by **davidlinn** » Mon Dec 05, 2005 9:07 pm

Bought it! Love it! Ugo is awesome. He gives away what most would charge for. Thank you, Ugo.

David

www.davidlinn.com

ugo · Post by **ugo** » Tue Dec 06, 2005 4:13 pm

by the way, i found another messed up mp3 link and corrected it. geeseaplenty's metallurgic pluck demo now links to the right mp3.

also, i was wondering...is there anything in particular you all would like to hear more demos of? (certain instrument/sound types with metallurgy, certain features, using metallurgy in an arrangement, etc.?)

thanks,
-ugo

mckenic · Post by **mckenic** » Tue Dec 06, 2005 5:18 pm

Gee us more fiddles huh?

Seriously tho - Sounds geat!

Dave

geeseaplenty · Post by **geeseaplenty** » Tue Dec 06, 2005 6:29 pm

Chris, congrats on your Harmony Central mention:

http://news.harmony-central.com/Newp/20 ... lurgy.html

Sorry I dropped the ball on preset creation, but it looks like you had plenty of talented staff to make up for my slack.

Can't wait for your next work of art.

ugo · Post by **ugo** » Tue Dec 06, 2005 6:45 pm

geeseaplenty wrote:Chris, congrats on your Harmony Central mention:

http://news.harmony-central.com/Newp/20 ... lurgy.html

thanks

Sorry I dropped the ball on preset creation, but it looks like you had plenty of talented staff to make up for my slack.

hey, no problem...and thanks for the mp3 demos!

mckenic wrote:Seriously tho - Sounds geat!

ianweb123 wrote:Another plug-in to boost the profile of UGO as a quality developer, very well done..

thanks guys!

-ugo

Watto · Post by **Watto** » Wed Dec 07, 2005 1:26 am

Man, I LOVE your GUIs - they're my favourites! You don't like the Lord of the Rings, by any chance? Has that kind of flavour about it...

(and no, I don't mean the movies - they were passable, but the book was GENIUS!!)

ugo · Post by **ugo** » Wed Dec 07, 2005 3:02 am

boogooloo1 wrote:Man, I LOVE your GUIs - they're my favourites! You don't like the Lord of the Rings, by any chance? Has that kind of flavour about it...

(and no, I don't mean the movies - they were passable, but the book was GENIUS!!)

im glad you dig the look.

embarassingly, i actually havent read the books. (the lord of the rings or the hobbit.) i've only known the stories through the movies (the old animated ones and the new ones), which i do dig. i really ought to read them someday.

-ugo

Ebenezer Squeezer · Post by **Ebenezer Squeezer** » Wed Dec 07, 2005 3:16 am

I'm having a problem in FLStudio. When I load Metallurgy into an effects slot and hit play, the cpu jumps to 90%+, stutters a bit, then drops down to below 10%. This also happens after I hit stop, then play again. Is this a synthedit problem or specific to Metallurgy? Other than that it works fine and I'm getting some fantastic sounds.

ugo · Post by **ugo** » Wed Dec 07, 2005 3:23 am

john (bassballjg) of dangerous bear has kindly offered a 30% off holiday discounts on many of his products to metallurgy customers.

he is also offering ignition for wusikstation for only $35 (normally $50.) ignition comes with over 800 megs of samples and over 200 patches. i made 100 of those patches and i put an emphasis on pads/atmospheres and wavesequences. you can hear mp3's of some of my patches here.

an email with all the info is already on its way to current metallurgy customers.

-ugo

ugo · Post by **ugo** » Wed Dec 07, 2005 4:08 am

Ebenezer Squeezer wrote:I'm having a problem in FLStudio. When I load Metallurgy into an effects slot and hit play, the cpu jumps to 90%+, stutters a bit, then drops down to below 10%. This also happens after I hit stop, then play again. Is this a synthedit problem or specific to Metallurgy? Other than that it works fine and I'm getting some fantastic sounds.

it would appear to be specific to metallurgy. i know that there is a bug somewhere in there that effects FL and Live (mentioned in the manual and in the first post of this thread), causing them to stutter when you unmute the effect. what you are describing is probably related to that.

i just did some more testing FL and found that i get stuttering if i press the stop button...but interestingly, i dont get that when i use the space bar to stop the sequencer. i hadnt run into that problem before because i always use the space bar out of habit.

i wasnt getting any cpu spikes or stuttering on play though. then i went into the audio options section and turned on "reset plugins on transport" just to see what would happen...and then i got stuttering when i pressed play. (but no big cpu spike.) if FL does some sort of reset on stop and mute, then this is definitely all part of the same problem.

i will keep looking for a fix to this bug. however, in the meantime, please check and see if your "reset plugins on transport" option is on. if it is, turn it off and see if it works any better for you. also, let me know if you still get stutters when using the space bar instead of the transport buttons.

sorry for the problems. i will try to solve this.

-ugo

Ebenezer Squeezer · Post by **Ebenezer Squeezer** » Wed Dec 07, 2005 4:52 am

Interesting, the stutters and CPU spike occur whether I use the start/stop buttons or the spacebar. Turning off "reset plugins on transport" did solve the problem for me though. Thanks! And, as you said, no problems during play which is the really important part.

ugo · Post by **ugo** » Wed Dec 07, 2005 11:22 pm

Ebenezer Squeezer wrote:Turning off "reset plugins on transport" did solve the problem for me though. Thanks! And, as you said, no problems during play which is the really important part.

ah cool, good to hear that worked for you. i will add this info to the manual until i can properly fix the bug.

-ugo

vigrani · Post by **vigrani** » Fri Dec 09, 2005 4:42 am

AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.

Hello,
4 days ago a bought the Ignition Crossgrade,i paid $35.US and i have not recived yet the item, my e-mails do not get any feedback from this guys,

Jonathan C. Gibson
Contact E-Mail: John@dangerousbear.com (mailto:John@dangerousbear.com)

Ugo - Metallurgy - Finally Released!