KVR Audio

Spe3D · Post by **Spe3D** » Wed Dec 21, 2005 12:20 pm

Going a little further on the acoustic kit – I have replaced the toms for Birch ones High Tension – donned the Sabian cymbals, got out the brushes and now got the Spe3d Semi-Brushed kit (also tweaked the envelopes a bit and a few other things.

The Samples are at 24 bit 48 K for the Toms n Sabians and the Birch 14 inch snare.

The rest are at whatever the last kit went out at.

Here is a quick demo without any added effects at all – so this is what it sounds like.

http://spe3d.com/audio/Spe3d_Semi_Brushed_Demo.mp3

You can now download the kit from the Auditorium on this link (don't forget to log in) its in the sample section

http://audioshots.com/auditorium/viewto ... 5552#25552

Best regards,

Peter

duncanparsons · Post by **duncanparsons** » Wed Dec 21, 2005 12:30 pm

cool

is it in the auditorium, or not on general release?

DSP

rockstar_not · Post by **rockstar_not** » Wed Dec 21, 2005 12:47 pm

Peter,

I've got RMIV now and have been looking for a brush-kit ready to load. I can't find it on the samples section of Auditorium - not loaded yet?

-Scott

Spe3D · Post by **Spe3D** » Wed Dec 21, 2005 1:42 pm

Ah! Ok I will put the link to Semi-Brushed in the auditorium and post back here when done

Thanks guys, should not be much longer.

Best regards,

Peter

Spe3D · Post by **Spe3D** » Wed Dec 21, 2005 2:54 pm

There you go - all uploaded (its not a big download so should be good for most I put it in a rar file)

Best regards,

Peter

pw · Post by pw » Wed Dec 21, 2005 2:57 pm

thank you!

duncanparsons · Post by **duncanparsons** » Wed Dec 21, 2005 3:00 pm

will d/l tomorrow at work (ADSL there, dialup @ home

)

DSP

Spe3D · Post by **Spe3D** » Wed Dec 21, 2005 4:04 pm

pw wrote:thank you!

Cheers pw

duncanparsons wrote: will d/l tomorrow at work (ADSL there, dialup @ home )

DSP

Yes it will whip down the line on ADSL

– I keep forgetting about the dial-up guys, this is just out of reach for them at 25MB thought the server supports resume for download manages (as long as they use a sensible amount of threads, like no more than two)

The 'Spe3d Fully Brushed' will be out at the end of this year, that kit is seriously big though not too sure what I am going to do with that yet.

Best regards,

Peter

Genetic_Junk · Post by **Genetic_Junk** » Wed Dec 21, 2005 4:33 pm

Thanks again for your stuff. Very well sampled. Can I ask what preamp you have?

I look forward to the fully brushed kit.

Sleepgolfer · Post by **Sleepgolfer** » Wed Dec 21, 2005 5:26 pm

I cannot open it...it says formt mismatch midi 1 order 0 size 96 message

zvon · Post by **zvon** » Wed Dec 21, 2005 6:21 pm

Spe3D wrote:I keep forgetting about the dial-up guys, this is just out of reach for them at 25MB thought the server supports resume for download manages (as long as they use a sensible amount of threads, like no more than two)
Peter

Thanks for your kits.
One thing you can do to help us poor souls who still have dial-up connections is to split your files into smaller chunks. Winrar will do that for you.

.jon · Post by **.jon** » Wed Dec 21, 2005 6:41 pm

Thanks a LOT

great sounding kit.

MRT · Post by **MRT** » Wed Dec 21, 2005 11:45 pm

dl'ing now, looking forward to trying this one out!
Thanks

P.T. · Post by **P.T.** » Thu Dec 22, 2005 5:07 am

Does the RMIV format contain the waves? Or are they embedded?

Spe3D · Post by **Spe3D** » Thu Dec 22, 2005 6:45 pm

Genetic_Junk wrote:Thanks again for your stuff. Very well sampled. Can I ask what preamp you have?

I look forward to the fully brushed kit.

Thank you Genetic

I have been trying many combinations of external and direct input recording, different mics, pres, mixers, editing etc. the lower case samples in the kit are reaching near to the apex of these combinations that I am pretty happy with so far

I will probably start to publish a list of some of the kit I use next year – not yet though

Fully Brushed has more cymbals and different pitched drums in various preset combinations

Sleepgolfer wrote:I cannot open it...it says formt mismatch midi 1 order 0 size 96 message

That’s an odd message to get Sleepgolfer, I can only suggest making sure the version of RM4 is the latest as the kit was compiled in the latest version, though I am not sure if that would have anything to do with the error you received – it might even be host related – too little info to go on – if you still have the problem with the kit and the latest version of RM4, it might be worth giving LinPlug an email describing the error complete with your host, os and computer hardware configuration, so that they can further investigate, also if others have had similar problems and reported them, then the bug could get fixed.

zvon wrote: Thanks for your kits.
One thing you can do to help us poor souls who still have dial-up connections is to split your files into smaller chunks. Winrar will do that for you.

Thank you zvon

Ah! Yest, That’s a good idea about spanning an archive like that, thanks

pakana wrote:Thanks a LOT

great sounding kit.

Thank you pakana

MRT wrote:dl'ing now, looking forward to trying this one out!
Thanks

Cheers! MRT

P.T. wrote:Does the RMIV format contain the waves? Or are they embedded?

Hi! P.T.

RM4 kits come in a combination of a preset just like most other vsti’s but also a directory with propriety files. It converts the waves at time of preset saving into this propriety format – so yes the waves are there – but – only playable in RM4

Thanks all

Best regards,

Peter

Semi-Brushed RM-4 Kit – Out Now 'n' FREE :O)