One thing i really hate about FL Studio

[kmonkey]

This is so dumb and unlogical. Ok i have few external synths. And i am using it in cubase without any issue. I am saying this not because i think that Cubase is better or that shit i am saying this because i wanna clear things before someone tryin to suggest me how to setup synths or any crap. I know pretty god what i must put where.

Ok here is da crap that drive me insanely these days. Can happen in 6.08 and in new beta. No difference.

Example. I create one project. It uses only external synths and effects(or soft. no difference). And everything is working just fine. Really fine. Almost to good to be true. No midi latency and that crap (as i can see MIDI is tighter than in my cubase for example). I save my project. I shut down my computer.

I power on my computer and my snths next day(boy how this is stupid). Windows boot up. I fire up FL Studio. Then from FL Studio i try to open that last project. And i click on it. And it almost load up then i get error message and FL crash. Here is message from Error signature.

AppName: fl.exe AppVer: 6.0.0.5 ModName: flengine.dll
ModVer: 6.0.0.8 Offset: 001b0e8c

And ok. I would not be so pissed of but there is one thing. I try this again. FL crash again. I try it once again. FL crash again. Fire it once again and voila. Project is loaded and i can work in it for hours

WTF. This is so unlogical. Why project can crash fl three time and then from fourth try it load perfectly?

Ahhh...maybe i should sleep now. Sorry for bad typing but that little almost amazing application just pissed me like hell with that unreasonable behaviour. It is needless to say that from Cubase i dont have any crash. Again just saying this to clear things like bad configuration

[Jbravo]

Do you have an older version you can try? A lot of people found v6 quite problematic when it came out, though I think a lot of those problems have been ironed out since then

[Lagrange]

I'm thinking from your error message that you were using FL 6.05 at some point?? If yes:

Copy FL Studio VSTi (Multi).dll & FL Studio VSTi.dll (should be in your Qbase vst plugins folder or C:\Program Files\VstPlugins or a "Steinberg\vstplugins folder) to a TEMP location then reinstall 6.08 with VST(i) plugin

OR

go to START - PROGRAMS - FL Studio 6 - Advanced - Instal plugin version..

This will update the plugin version that cubase uses.. If it does work your can then delete the old one in the TEMP location.. Hope this helps..

BTW if you reinstall and want to keep your plugins list and set up I have a a little trick to keep your setups intact..

Copy AllPlugins.scr FavPlugins.scr HelpPlugins.scr and all 5 Snap.scr files to a TEMP location before install and replace em after install..

Again good luck..

[kmonkey]

I'm thinking from your error message that you were using FL 6.05 at some point?? If yes:

Copy FL Studio VSTi (Multi).dll & FL Studio VSTi.dll (should be in your Qbase vst plugins folder or C:\Program Files\VstPlugins or a "Steinberg\vstplugins folder) to a TEMP location then reinstall 6.08 with VST(i) plugin

OR

go to START - PROGRAMS - FL Studio 6 - Advanced - Instal plugin version..

This will update the plugin version that cubase uses.. If it does work your can then delete the old one in the TEMP location.. Hope this helps..

BTW if you reinstall and want to keep your plugins list and set up I have a a little trick to keep your setups intact..

Copy AllPlugins.scr FavPlugins.scr HelpPlugins.scr and all 5 Snap.scr files to a TEMP location before install and replace em after install..

Again good luck..

I will try that but it's a version 6.08. But same thing is happening even in new beta. And i am talkin about FL standalone not VSTi plug. But i have problems with VSTi version to sometimes. It crash some cubase projects with FL VSTi inside

[Lagrange]

Dont take this personally but are you using a legal version of FL?? Be careful with your answer as you could banned from here for even bringin up issues with cracked software.. With that said there is better support at the LoopTalk section of the FL website and or techsupport @ http://forum.e-officedirect.com/forum.e ... echsupport

This will fix the problem..

[riley4reason]

The only thing I hate about it is that it's hard to do simple things.
Other than that I love it!

[kmonkey]

Dont take this personally but are you using a legal version of FL?? Be careful with your answer as you could banned from here for even bringin up issues with cracked software.. With that said there is better support at the LoopTalk section of the FL website and or techsupport @ http://forum.e-officedirect.com/forum.e ... echsupport

This will fix the problem..

Well mister i am taking this personally (as i spit every day on those who dont use legal version) and of course that i am using legal version of software. Should we exchange our reg.number parts here in public so let tony tony chopper(or Jean) decide are we both legal.

I knew it. Suddenly if i dont post things on looptalk (i am doing it here in hope that i will get faster response here) someone will say that i am using cracked software.

Well thank you for your help and for your wise sharing of image line links.(In case you want to find me on looptalk search for topics in which i am in search for JV1080 dashboard) You really dont need to help anymore. Someone else will as this is case from year 2004...

And if you can please tell me from what FORCHRISTSAKE detail you came with stupid conclusion that i am using cracked version? Please enlight me




p.s. for the record i think i am about to isolate my problem...

[riley4reason]

I don't post on looptalk either and I'm a legal owner.
The questions I ask are too far below them to answer for me. I don't think I have ever had a reply from anyone other than JMC over there.
People here on KVR are nice and hlepful though. Riley

[TotcProductions]

Relax kmonkey... I understand taking it personally, but it isn't too bad...somebody has to say it in threads like these at some time. Has nothing to do with your persona, it's just an odd problem you're having, that's all. The users linked you to the loop talk forum to aid you in getting a quicker response...being that LoopTalk is one of the official ImageLine forums. Nothing to get up in arms about.

As for your problem, I don't know what could be causing it. You'll probably get quicker help sending the error codes you're recieving, and possibly a windows dump log of the crash, over to ImageLine via a support request. I've always found ImageLine to respond within 24 hours when I use the support request form.

Peace..and good luck!

[kmonkey]

I don't post on looptalk either and I'm a legal owner.
The questions I ask are too far below them to answer for me. I don't think I have ever had a reply from anyone other than JMC over there.
People here on KVR are nice and hlepful though. Riley

Thanks for the support riley. I am thinking that too about KVR. And i always had awesome support and overall conversation here. There are some realy nice guys. Sometimes i am really pissed on thinkheaders and i can be like flame thrower(which is wrong). So sorry if i am being rude and shit head but you Lagrange could think twice before posting (me too..)



Oh well...stay tuned

[kmonkey]

Ok here is some brief info. I did install FL Studio 6.08 on my second partition (with other windows XP and with no FL installed before). The thing is that here it can load perfectly. With all ton of plugs, extrenal synths etc. Not any error. Only thing that is different is that here i dont have Atmosphere installed but i doubt that that is problem since i am using this almost a year without errors. Anyway it could be that some file is screwed on my main DAW partition with apps.

It looks like Acronis True Image will be started again. Sorry for any inconvenience

Lagrange will you take my apology? (take in account that i was mad at whole world )

[riley4reason]

Ok here is some brief info. I did install FL Studio 6.08 on my second partition (with other windows XP and with no FL installed before). The thing is that here it can load perfectly. With all ton of plugs, extrenal synths etc. Not any error. Only thing that is different is that here i dont have Atmosphere installed but i doubt that that is problem since i am using this almost a year without errors. Anyway it could be that some file is screwed on my main DAW partition with apps.

It looks like Acronis True Image will be started again. Sorry for any inconvenience

Lagrange will you take my apology? (take in account that i was mad at whole world )

Hey Kmonkey,,

Not to snarf you thread or anything but could you help with this?
Here's what I wan't to do using my Electribe MX and FL6.

The drum part of the Electribe is going out on midi channel 10, the synth parts or going out on midi channels 1,2,3,4 and 5

I want to route channel 10 to percussion in FL6 and 1 through 5 of the synth parts to their own individual vsti/generators.

the problem I keep having is it seems even with midi out controllers they all seem to get omni instead of a specific channel.

any ideas?

Riley

[kmonkey]

Hey. I am at work now. I will try to check your issue when i get home. Stay tuned

[riley4reason]

Hey. I am at work now. I will try to check your issue when i get home. Stay tuned

Thanks! I probaly sleep while you are at work, I'm in the central time zone.

I'm off to work now. I'm going to try that flipside website forum too. It looks pretty good.

Riley

[teacee]

I basically stop using my Fl Studio because of all major crashes losing data, songs not loading at another date, don't get me wrong I really love how easy Fl studio is easy to work with, great for beats and putting quick loops together. I have posted on the Fl Studio site along with many others who have similar problems(and yes I I bought my Fl Studio) I have using it since 4.0 which was really great along with 5.0 but 6.08 has been nothing but trouble, I have wipe 2 of my computers clean re-installed the basic os and drivers need to run Fl Studi and still habe problems. I have a AMD64 3500+ 1gb of Ram M-audio Delta 1010lt in one system and AMD 2800+ 1gb of ram Audigy Platinum Pro souncard in the other, and they both have crashed, I am using Sonar 5 Producer edition full time now, I really miss the Fl Studio, I can use it for small projects and keep my finger cross, and I sometimes get lucky. My point after all that has been said, I want my software to work as it should, I paid for it and will be pleased when the bugs are worked out and I can use Fl Studio with out crashing,