The first thing i tried editing though was a talking birthday card and suprisingly it made some great sounds. 
CIRCUIT BENDING ... Mini forum in a single thread !!!
-
- KVRian
- 606 posts since 6 Aug, 2005
I have modified a speak n maths, i used to have a keyboard i made a pitch bend mod for it The first thing i tried editing though was a talking birthday card and suprisingly it made some great sounds.
The first thing i tried editing though was a talking birthday card and suprisingly it made some great sounds. 
-
- KVRian
- 1422 posts since 16 Jan, 2004 from Minneapolis, MN.
I just finished my 2nd bend. 
It features a totally awesome joystick on two 100k pots that are run thru trim pots before hitting SPDT switches that send signal to 'Pitch' or 'f**k Up'.
Listen to it f**k up some Family Favorites!
It features a totally awesome joystick on two 100k pots that are run thru trim pots before hitting SPDT switches that send signal to 'Pitch' or 'f**k Up'.
Listen to it f**k up some Family Favorites!
I've recorded over 400 answering machines - the Best Of recordings are available for use and can be found here:
https://answerphone.tumblr.com/
https://answerphone.tumblr.com/
-
- KVRian
- 703 posts since 15 Aug, 2005
_oswald: oh, man, your project reminds me of the architecture of Antoni Gaudi, and I am officially intrigued.
in an unrelated topic:
knock knock
who's there?
oswald.
Oswald who?
oswald my gum
in an unrelated topic:
knock knock
who's there?
oswald.
Oswald who?
oswald my gum
-
- KVRAF
- 2135 posts since 12 Jul, 2004 from Brave New World
I've been documenting my process lately. here are the first three entries:
Warp Box
Warphone MkI
HAU 2000
there's another piece that I bent last week that I'll write up this weekend. unfortunately I was struck by this urge to document my efforts at precisely the same time I had a run of bad luck with some projects, so two of the above listed projects are DOA. but I like the idea of sharing...
enjoy.
Warp Box
Warphone MkI
HAU 2000
there's another piece that I bent last week that I'll write up this weekend. unfortunately I was struck by this urge to document my efforts at precisely the same time I had a run of bad luck with some projects, so two of the above listed projects are DOA. but I like the idea of sharing...
enjoy.
"Duct tape is like the force. It has a light side, a dark side, and it holds the universe together...." -Carl Zwanzig
-
- KVRAF
- 2818 posts since 30 Aug, 2001 from where dinosaurs are still alive
-
- KVRian
- 1422 posts since 16 Jan, 2004 from Minneapolis, MN.
w00t! New bend done!
It's a pretty simple one - a 1meg pot attached to an SPDT switch with one end going to a pitch-up contact and the other hitting a 100kOhm Trim Pot before hitting a pitch-down contact.
Linky for soundie.
It's a pretty simple one - a 1meg pot attached to an SPDT switch with one end going to a pitch-up contact and the other hitting a 100kOhm Trim Pot before hitting a pitch-down contact.
Linky for soundie.
I've recorded over 400 answering machines - the Best Of recordings are available for use and can be found here:
https://answerphone.tumblr.com/
https://answerphone.tumblr.com/
-
- KVRAF
- 1527 posts since 3 Apr, 2002 from desolation row
...
-
- KVRian
- 1422 posts since 16 Jan, 2004 from Minneapolis, MN.
This, is Tigger Squarepants.
Tigger Squarepants is the result of jamming a Spongebob Squarepants voice box into an 8" tall tigger doll and bending it. He has an SPDT switch to trigger from his selection of phrases, a 1meg Pot run into a 50k TrimPot (at about 25k resistance) that hits a Pitch Down contact and a 1/4" jack located... in his ass.
The only recording made of him, can be found here. After this recording was made, he was packed and sent to Hawaii to torment an unfortunate girl and perhaps anyone who is unfortunate enough to be around when she set's this bitch off.
Tigger Squarepants is the result of jamming a Spongebob Squarepants voice box into an 8" tall tigger doll and bending it. He has an SPDT switch to trigger from his selection of phrases, a 1meg Pot run into a 50k TrimPot (at about 25k resistance) that hits a Pitch Down contact and a 1/4" jack located... in his ass.
The only recording made of him, can be found here. After this recording was made, he was packed and sent to Hawaii to torment an unfortunate girl and perhaps anyone who is unfortunate enough to be around when she set's this bitch off.
I've recorded over 400 answering machines - the Best Of recordings are available for use and can be found here:
https://answerphone.tumblr.com/
https://answerphone.tumblr.com/
-
- KVRist
- 94 posts since 12 Jul, 2006 from ireland
Tigger Squarepants is cool.......maybe I skipped over it , but what would be a good value of pot to provide a voltage drop for guitar pedals??
fisting the aesthetics of failure
-
- KVRAF
- 2135 posts since 12 Jul, 2004 from Brave New World
1k linear
"Duct tape is like the force. It has a light side, a dark side, and it holds the universe together...." -Carl Zwanzig
-
- KVRist
- 94 posts since 12 Jul, 2006 from ireland
thanks very much, my "pedalboard" is going to scream this weekend......intel wrote:1k linear
-
- KVRist
- 94 posts since 12 Jul, 2006 from ireland
OK, not quite a circuitbend, but I was just thinking...
Karplus Strong algorithm is basically a burst of white noise fed to a delay & the output, the delay out fed into a LP filter, from there to the output and back into the delay.....Would this work using an analog delay, analog filter, and white noise source? I can't go home & do it cos i'm in college working on a project about....physical modelling. Hmm....Analog physical modelling.
Karplus Strong algorithm is basically a burst of white noise fed to a delay & the output, the delay out fed into a LP filter, from there to the output and back into the delay.....Would this work using an analog delay, analog filter, and white noise source? I can't go home & do it cos i'm in college working on a project about....physical modelling. Hmm....Analog physical modelling.
fisting the aesthetics of failure
-
- Beware the Quoth
- 35434 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
Yes. Check the manual pages for the Doepfer A100's A-188 analogue delay modules for examples...endfindead wrote:OK, not quite a circuitbend, but I was just thinking...
Karplus Strong algorithm is basically a burst of white noise fed to a delay & the output, the delay out fed into a LP filter, from there to the output and back into the delay.....Would this work using an analog delay, analog filter, and white noise source? I can't go home & do it cos i'm in college working on a project about....physical modelling. Hmm....Analog physical modelling.
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
-
- KVRian
- 775 posts since 13 Jul, 2004 from Hull, United Kingdom
Short answer is yes although it might be a pig to tune the delayendfindead wrote:OK, not quite a circuitbend, but I was just thinking...
Karplus Strong algorithm is basically a burst of white noise fed to a delay & the output, the delay out fed into a LP filter, from there to the output and back into the delay.....Would this work using an analog delay, analog filter, and white noise source? I can't go home & do it cos i'm in college working on a project about....physical modelling. Hmm....Analog physical modelling.
Have a better one - Saul Cross 