KVR Audio

dreaddd · Post by **dreaddd** » Fri Jun 13, 2008 8:33 am

i have problems reloading on Cubase projects that have either BootEQ or Density switched on as insert on a channel..
Cubase SX3, Win XP SP2 here...
anyone having SX3 installed experiencing no problem at all on reloading projects?
Peace

mauseoleum · Post by **mauseoleum** » Fri Jun 13, 2008 8:45 am

What's the verdict? Synthmaker OK on AMD and not on pentium - core and cubase? something else?

Chopper · Post by **Chopper** » Fri Jun 13, 2008 9:21 am

with EXACTLY the same hosts/operating system/configuration, on my single core, it takes ages to boot, while on the dual core, it looks fine. my 2 cents...

mauseoleum · Post by **mauseoleum** » Fri Jun 13, 2008 9:26 am

What hardware do you have? Is this only cpu-related or can be chipset problems? I know there were problematic chipsets in past, but I'm not really an expert on the subject ...

Otoh, I'm very curious what's the "problem factor" ...

mono_ton · Post by **mono_ton** » Fri Jun 13, 2008 9:40 am

hi!

first thx bootsie for his plugs!

second : i tried to make a homepage for bootsie but im not a really good website maker and very busy atm, so if anyone can make a homepage for him pls do it and send me a pm cause i host bootsies plugs and i can give u all relevant path's of the dirs!
i hope thats ok for bootsie?

greets mono

bduffy · Post by **bduffy** » Fri Jun 13, 2008 10:31 am

Bootsie needs a site? I'll say!!!

I'm going away tomorrow until Monday, but if no one bites by then, I'd love to help out. It'd be something quick 'n' dirty in Wordpress, hack a template up, etc; I'm not the greatest coder, but I have a pretty good eye. I'd love to honour a dev with some design work.

like I said, if no one steps up, I'll slap something together. It's getting bloody hard to keep track of bootsie's posts to get the plugins!

Midiworks · Post by **Midiworks** » Fri Jun 13, 2008 10:38 am

bduffy wrote:Bootsie needs a site? I'll say!!!

I'm going away tomorrow until Monday, but if no one bites by then, I'd love to help out. It'd be something quick 'n' dirty in Wordpress, hack a template up, etc; I'm not the greatest coder, but I have a pretty good eye. I'd love to honour a dev with some design work.

like I said, if no one steps up, I'll slap something together. It's getting bloody hard to keep track of bootsie's posts to get the plugins!

Good idea, than I offer the webspace with FTP access.

bduffy · Post by **bduffy** » Fri Jun 13, 2008 10:40 am

Midiworks wrote:
bduffy wrote:Bootsie needs a site? I'll say!!!

I'm going away tomorrow until Monday, but if no one bites by then, I'd love to help out. It'd be something quick 'n' dirty in Wordpress, hack a template up, etc; I'm not the greatest coder, but I have a pretty good eye. I'd love to honour a dev with some design work.

like I said, if no one steps up, I'll slap something together. It's getting bloody hard to keep track of bootsie's posts to get the plugins!
Good idea, than I offer the webspace with FTP access.

Sure! But isn't mono_ton hosting?

Mercado_Negro · Post by **Mercado_Negro** » Fri Jun 13, 2008 4:38 pm

Bootsie: Great Programmer! Great Engineer!... Great Plugs....

I've tested Booteq a lot but I can't use it in my mixes because I work on 48kHz.... my question is:

Will it ever be released 48kHz-capable?

bailees7irish · Post by **bailees7irish** » Fri Jun 13, 2008 4:43 pm

bduffy wrote:
shogger wrote:
bduffy wrote:
shogger wrote:Bduffy, try it with Reaper please. to see if that does it.

Shogger
Sorry, man: that wasn't it. AFAICT, it's my old, single-core machine, which is sputtering to its ignoble defeat.
OK, man. The computer in the other studio is a DualCore from last year so I thought it couldn't be any "old hardware" reason.

Shogger
The dual-core is the one with Cubase? My computer's from 03-04, so it beats me hands-down! I was hoping you'd cracked the code, but looks like I'll suffer a little longer.

Anyways, back to bootsie's greatness.

man, you think yours is bad? i'm on a single core from January 2002!

bootsie · Post by **bootsie** » Fri Jun 13, 2008 6:05 pm

bduffy wrote:Bootsie needs a site? I'll say!!!

I'm going away tomorrow until Monday, but if no one bites by then, I'd love to help out. It'd be something quick 'n' dirty in Wordpress, hack a template up, etc; I'm not the greatest coder, but I have a pretty good eye. I'd love to honour a dev with some design work.

like I said, if no one steps up, I'll slap something together. It's getting bloody hard to keep track of bootsie's posts to get the plugins!

holy smokes, dumb little me, do I have to learn Wordpress? Is that the best? mono_ton must host that of course

I've tested Booteq a lot but I can't use it in my mixes because I work on 48kHz.... my question is:

Will it ever be released 48kHz-capable?

I really can't promise anything at the moment, I'm so busy. I hear you but it's just a matter of 'resources'. I have a day job and so on ...

Thanks for your support to you all!

bootsie · Post by **bootsie** » Sat Jun 14, 2008 8:26 am

see http://rekkerd.org

djsubject · Post by **djsubject** » Sat Jun 14, 2008 8:36 am

some users at KvR are slow Bootsie

so i'll help them out!!

http://rekkerd.org/tag/bootsy/

osiris · Post by **osiris** » Sat Jun 14, 2008 7:17 pm

Hey B--An AMD Athlon 64 3400+ Processor-- 2.2Ghz /Ran in old version Orion Platinum. I don't know if it's dual core or hard core. I know some SM productions take forever to load, but never got that one behind preset select like that. I'll try running it again & let you know the results. Thanks--O--

osiris · Post by **osiris** » Mon Jun 16, 2008 5:40 pm

Boots, Ran Density again & got the same odd behaviour. The first few presets selected were fine. When I got toward the bottom of the list is when the delayed selecting started. This has never happened with any of your other stuff. I may have a ghost in my machine.....

bootsie roundup