LinPlug

fuse · Post by **fuse** » Thu Oct 30, 2008 8:17 pm

Hello,

what are the Demo-Restrictions of RMV?
Is a manual included in the DEMO-Download of RMV?

Thanks

Kriminal · Post by **Kriminal** » Thu Oct 30, 2008 8:44 pm

http://www.linplug.com/Download/download.htm

The Demos are fully functional. The only restriction that applies to demo versions is that they emit a noise about once every minute.

took me 20 seconds to find that out....

Kriminal · Post by **Kriminal** » Thu Oct 30, 2008 9:44 pm

a VST2.0 or AU capable host software, a screen resolution of 1024x768 or higher, internet access OR Syncrosoft USB eLicenser for license activation

i assumed this to mean you got an activation key via email or something to use the demo...but alas no....

so its no demo if you dont have a sync stick?

Peter from LinPlug · Post by **Peter from LinPlug** » Fri Oct 31, 2008 1:43 pm

Ok, lets be precise: The instrument is the same as the full version. Its activated via Syncrosoft Activation Key, the license then can be stored on the computer OR a USB stick. If you activate it with a demo license its a demo, else the full beast.

Was that the question ?

Kriminal · Post by **Kriminal** » Fri Oct 31, 2008 2:01 pm

how do you activate the demo?

(i have no syncsoft at all on my pc, do i need it for the demo?)

Peter from LinPlug · Post by **Peter from LinPlug** » Fri Oct 31, 2008 2:20 pm

Unfortunately you would indeed need it. Thats a disadvantage of the Syncro system.
To activate the demo you request a Authorization code from us that you enter in the Syncrosoft LCC (part of the software installed with the demo) to download the demo license.

Yes... I also have my problems with "demo license" ...

Kriminal · Post by **Kriminal** » Fri Oct 31, 2008 2:29 pm

ok, thanks for the reply

Peter from LinPlug · Post by **Peter from LinPlug** » Fri Oct 31, 2008 2:34 pm

You are welcome. Where can i listen to some of your recent music. I enjoyed it a couple fo years ago ... somewhat i drowned into work for a while.

Kriminal · Post by **Kriminal** » Fri Oct 31, 2008 2:36 pm

i have been very quiet on the music front recently, prob only a few trax in two years..(bben messing with synth edit, and have two small children

)but im getting back into it again now i have a bit more time to myself, so prob some new stuff up in next few weeks

EDIT: i am actually gonna put some oldish trax up on new site this w-end if you want to listen. click my www

thanks

Dave

Peter from LinPlug · Post by **Peter from LinPlug** » Fri Oct 31, 2008 3:19 pm

Will check it ....thank you. Two small childs ... pretty clear you have few time for something else.

sqigls · Post by **sqigls** » Tue Nov 04, 2008 11:22 am

When I load the demo in Live 7.0.10, I have no automation drop box arrow and the ECS doesn't work... so no automation!??
Also when I load a track with an RMV in it - there is always a loop loaded in loop slot 1... I don't even USE the loop function, why does it load itself every time? Even when I manually unload all kits, loops, samples, grooves and other crap - it happens every time. Is that a limitation of the Demo? Also... I cannot use the Mix knob on the snare drum 1 synth - it glitches all over the place and jumps from side to side (2 o'clock to 10 o'clock sorta thang)...

I must say, I was looking forward to version 5, but I'm not convinced enough to upgrade yet... nice Snare drum synth though! and the compression sounds better!... i wish I could just use a cut down version for the synth modules though, I reckon LinPlug rock at the SYNTHESIS side of things. I think all the loops and grooves (etc) are a real pain in the date. Leave that sh!te to all the romplers, and that Guru program... : ( "oh, ok Simon, we'll drop everything and start coding you a nice little Drum Synth shall we..."

my one and a half cents...

Peter from LinPlug · Post by **Peter from LinPlug** » Tue Nov 04, 2008 1:40 pm

Sqigls, ECS is working pretty nice here. The Mix not working as expected is indeed a bug, its fixed in 502. The Loop is loaded because its a demo and its easier for people to press play than to find out how to load something ...thus a kit and a loop. You can easily unload it at start of the demo (red x).

However, there is a bug in the demo, that when you set the MIDI channel of the kit to "All" the Audio-Loop will trigger the kit even after its unloaded.

John-E34 · Post by **John-E34** » Wed Nov 12, 2008 2:39 pm

Peter from LinPlug wrote:Unfortunately you would indeed need it. Thats a disadvantage of the Syncro system.
To activate the demo you request a Authorization code from us that you enter in the Syncrosoft LCC (part of the software installed with the demo) to download the demo license.

Yes... I also have my problems with "demo license" ...

Gee I hope you are getting a huge kickback from SynchroSoft

Do past (paying) customers ever get rated above those that you think steal your software

6 months ago I would have honestly stated that Linplug and Rob Papen were about the best dev's around.

Sadly, after the C/P crap, Urs, Tone2, Pro-Sounds, Disco dsp, etc etc, have already got my cash, with more to go there way....

To go from so high. all for the love of Syncrosoft, is beyond me.....

Bonteburg · Post by **Bonteburg** » Wed Nov 12, 2008 4:28 pm

Oh dang ... I was hoping for a serial number based system