fb1 vsti...no gui
http://web.archive.org/web/200511250249 ... 051102.zip
Old Free VSTi Gems From The Past
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
-
- KVRAF
- 3689 posts since 13 Jun, 2004
anyone manage to get this one??mztk wrote:wahnsyn was down when i looked.
plugin:
http://www.synergiea.fr/RickForce/index ... e=MPlugD50
(couldn't get this one; anyone have it?)
more cubase mixermaps:
http://www.dhoop.de/php/show.php?v1q3wd ... 38nbtgv1=1
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
"You must register on the site to access the download. "
it's not freeware, it's 40 euros...tho if you register on that site you can request to "demo" it...
here's the whole page via google translate:
In DEMO / TEST (the period of noise: 20s) MPlugD50 - VSTi Plugin / EXE
This is a test version. Many parameters remain to "calibrate" or recalibrate ^ ^.
It looks vaguely like the sounds of the D50 (I'll let you judge) is compatible with the D50 sysex.
Only the 2 Reverse Gate "that I have failed to develop. I have a vague idea but hey .. play at the beginning, the end of a sound consisting of about 240 parameters ... hard:).
Ability to import or export to the synth or sysex.
Improvements:
1.05
Same version as the 4.1 except ... more than it spits in a host ... alala, I added an EQ output to meet some of its color, much like the synth. But here is what differentiates the edited version and the version in SynthMaker compiled VSTi? bin modules "purgeable" uncompiled modules. I served GUI EQ, and AC was crashing MPlugD50 VSTi version in the host and not in SynthMaker, this change of patch. Too bad,: (. It is true that I am no longer in a period Programming ^ ^, but rather vacation / Music / Games CSS / Insurgency:). Bah, back soon.
Well, a lot of work remains, saturate a little AC: lower volumes if necessary. The envelopes and other settings are not optimized yet.
1.04
Modification of the Wave Generator for Saw, I took the algorithm of the D50 (I missed ..) so the Sawtooth is created from the Square, multiply by a cosine. It looks a little more to the primary form of Saw Synth in the D50. I have added a DC blocker and more ...
I had a prob on the EQ, bandpass did not work anymore ^ ^. I took the opportunity to change the code. But still remains a concern with this EQ. He tends to saturate the media to gain when the Hg is too high. I have temporarily limited to 840 Hz at 6 dB max.
Vi ah, I also changed the PWM .. I did vary from 0.49 to 0.09 .. then made it varies from 0.5 to 0.97 ... ^ ^ corrected.
I recall that all existing banks on the net can be imported into MPlugD50.
1.03
I spent one month on version 1.03 to try to optimize the processor load: 2.7% idle and around 20% when playing an arpeggio with the major release.
(Seen in Fruityloops with Intel (R) Core (TM) 2 Duo@2.40GHz / 2GB Memory)
Test VISTA, XP -> Ok
It's not that, but it gets better.
The activation key is now saved between sessions.
The file import. Syx D50 or work better, at least for the EXE version, to test for the VST version with the D50.
The Gate Reverb are more effective.
In fact, I almost changed everything in the code and structures in SynthMaker ^ ^:
- Conversion of all code in C + SSE assembler optimization
- The set of parameters or event-stable for the duration of a note is treated as "green." They then moved into poly variable across arrays indexed by pitch.
Better manage grades / Off, also covered in green before sending on MIDI converters / Voices / Poly (Two converters: UPPER, LOWER), which allows me to obtain modes Whole/Whole-S/Split/Split- U.S. and Split-LS.
Restructuring LFO tabulated, converted and indexed to the position of the Sample for each use (PWM CutOff, Amplitude, Pitch)
Editing envelopes according to the Gate and treatment per block / session.
Package the whole chain mono, Chorus / EQ / Chase / Reverb / Volume.
etc. ...
This VSTi / EXE will soon be on sale for 40 euro (scheduled on Paypal only), for the little that interests you: D.
Many of cogitation and SynthMaker is still not given ..
I'm not too bad and cons of earning a little under ^ ^. Bah RickyD50 it is freeware:).
The purchasing module is currently not active.
He remains free activation keys for proposing as a tester:). Especially because normally, the key management should work better ^ ^.
Ask me by email, writing: "j''en want one and I am willing to try!".
Being a tester, try it up the functions of the VSTi, take notice ... and above all send me a report by email containing a minimum of: well or not well ^ ^.
PS:
Ahvi for conversions. Syx in VSTet conversely, I have a lil dvp software vb2008 ... it is in the subfolder of your MPlugD50 installation.Il requires the install. NET Framework version 2.0 or higher.
You must register on the site to access the download.
Number of downloads: 410 to 184 members.
Back
it's not freeware, it's 40 euros...tho if you register on that site you can request to "demo" it...
here's the whole page via google translate:
In DEMO / TEST (the period of noise: 20s) MPlugD50 - VSTi Plugin / EXE
This is a test version. Many parameters remain to "calibrate" or recalibrate ^ ^.
It looks vaguely like the sounds of the D50 (I'll let you judge) is compatible with the D50 sysex.
Only the 2 Reverse Gate "that I have failed to develop. I have a vague idea but hey .. play at the beginning, the end of a sound consisting of about 240 parameters ... hard:).
Ability to import or export to the synth or sysex.
Improvements:
1.05
Same version as the 4.1 except ... more than it spits in a host ... alala, I added an EQ output to meet some of its color, much like the synth. But here is what differentiates the edited version and the version in SynthMaker compiled VSTi? bin modules "purgeable" uncompiled modules. I served GUI EQ, and AC was crashing MPlugD50 VSTi version in the host and not in SynthMaker, this change of patch. Too bad,: (. It is true that I am no longer in a period Programming ^ ^, but rather vacation / Music / Games CSS / Insurgency:). Bah, back soon.
Well, a lot of work remains, saturate a little AC: lower volumes if necessary. The envelopes and other settings are not optimized yet.
1.04
Modification of the Wave Generator for Saw, I took the algorithm of the D50 (I missed ..) so the Sawtooth is created from the Square, multiply by a cosine. It looks a little more to the primary form of Saw Synth in the D50. I have added a DC blocker and more ...
I had a prob on the EQ, bandpass did not work anymore ^ ^. I took the opportunity to change the code. But still remains a concern with this EQ. He tends to saturate the media to gain when the Hg is too high. I have temporarily limited to 840 Hz at 6 dB max.
Vi ah, I also changed the PWM .. I did vary from 0.49 to 0.09 .. then made it varies from 0.5 to 0.97 ... ^ ^ corrected.
I recall that all existing banks on the net can be imported into MPlugD50.
1.03
I spent one month on version 1.03 to try to optimize the processor load: 2.7% idle and around 20% when playing an arpeggio with the major release.
(Seen in Fruityloops with Intel (R) Core (TM) 2 Duo@2.40GHz / 2GB Memory)
Test VISTA, XP -> Ok
It's not that, but it gets better.
The activation key is now saved between sessions.
The file import. Syx D50 or work better, at least for the EXE version, to test for the VST version with the D50.
The Gate Reverb are more effective.
In fact, I almost changed everything in the code and structures in SynthMaker ^ ^:
- Conversion of all code in C + SSE assembler optimization
- The set of parameters or event-stable for the duration of a note is treated as "green." They then moved into poly variable across arrays indexed by pitch.
Better manage grades / Off, also covered in green before sending on MIDI converters / Voices / Poly (Two converters: UPPER, LOWER), which allows me to obtain modes Whole/Whole-S/Split/Split- U.S. and Split-LS.
Restructuring LFO tabulated, converted and indexed to the position of the Sample for each use (PWM CutOff, Amplitude, Pitch)
Editing envelopes according to the Gate and treatment per block / session.
Package the whole chain mono, Chorus / EQ / Chase / Reverb / Volume.
etc. ...
This VSTi / EXE will soon be on sale for 40 euro (scheduled on Paypal only), for the little that interests you: D.
Many of cogitation and SynthMaker is still not given ..
I'm not too bad and cons of earning a little under ^ ^. Bah RickyD50 it is freeware:).
The purchasing module is currently not active.
He remains free activation keys for proposing as a tester:). Especially because normally, the key management should work better ^ ^.
Ask me by email, writing: "j''en want one and I am willing to try!".
Being a tester, try it up the functions of the VSTi, take notice ... and above all send me a report by email containing a minimum of: well or not well ^ ^.
PS:
Ahvi for conversions. Syx in VSTet conversely, I have a lil dvp software vb2008 ... it is in the subfolder of your MPlugD50 installation.Il requires the install. NET Framework version 2.0 or higher.
You must register on the site to access the download.
Number of downloads: 410 to 184 members.
Back
-
- KVRAF
- 1924 posts since 24 Apr, 2010
pourquoi ne pourriez-vous pas l'obtenir ?
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
i got in, and nabbed it...signing up was quick and painless, just downloaded it...
i dunno WHY i downloaded it, but it's here, lol...
i dunno WHY i downloaded it, but it's here, lol...
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
and to add insult to injury, the only sound i got out of it was the hiss from the nag software...no sound when loaded with the contained executable, and the dll doesn't work with savihost...so...to me?
thumbs down...lotta work for very little return, lol
thumbs down...lotta work for very little return, lol
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
bob bobwood wrote:pourquoi ne pourriez-vous pas l'obtenir ?
i est-il arrivé, ne vaut pas le téléchargement fous, lol
-
- KVRAF
- 1924 posts since 24 Apr, 2010
MPlugD50 running fine in FL9 after altering the buffer, actually quite like it and will given it a good run out. Also downloaded the GESTD50 and set that up, though it takes a while. Not sure what to do with it, that's one for later. Toodle-pip.
-
- KVRAF
- 2250 posts since 29 Nov, 2004
Standalone declicker/denoiser free for personal use:
http://www.personal.uni-jena.de/~di48jo ... gramm.html
http://www.personal.uni-jena.de/~di48jo ... gramm.html
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
http://homepage.ntlworld.com/medsoundst ... EEWARE.zip
Publisher's Description of OctaMED Soundstudio
OctaMED Soundstudio is a sound sample sequencing program which originated on the Amiga computer. OctaMED Soundstudio is a stereo 64-channel sequencer, with a range of real-time effects and sound sample editing facilities. OctaMED Soundstudio gives you full control over what is produced, without any limits placed on the speed of the tracks and samples. The program can be used to control MIDI equipment, if required.
Publisher's Description of OctaMED Soundstudio
OctaMED Soundstudio is a sound sample sequencing program which originated on the Amiga computer. OctaMED Soundstudio is a stereo 64-channel sequencer, with a range of real-time effects and sound sample editing facilities. OctaMED Soundstudio gives you full control over what is produced, without any limits placed on the speed of the tracks and samples. The program can be used to control MIDI equipment, if required.
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England
this is....ummm...kinda free...may be neat to check out, seems cheap to boot..
http://www.moosware.net/PercussionStudio/
http://www.moosware.net/PercussionStudio/
-
pinkjimiphoton pinkjimiphoton https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=83788
- KVRAF
- 4790 posts since 9 Oct, 2005 from New England