MidiShaper 1.4 Out Now / Modulate your synths, effects and hardware
-
- KVRian
- 809 posts since 24 May, 2005
And I can't believe I missed this one.Shabdahbriah wrote:Aloysius wrote:Hmm ... Well, I hope you're not too strict on the time anyway!!!Jakob / CableGuys wrote:hmmm my post on the offer was from August 24..Aloysius wrote:Hope you're not too strict with the time. I'd really like to try this out later on today.Jakob / CableGuys wrote:Until 4pm CET today you can still buy MidiShaper for EUR 10/USD 15. I will then change the price to EUR 20/USD 30.
-
Jakob / Cableguys Jakob / Cableguys https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=77744 - KVRian
- Topic Starter
- 1130 posts since 11 Aug, 2005 from Hamburg, Germany
Yes! All our plugins are 64-bit as well.Liero wrote:64-bit?
-
Jakob / Cableguys Jakob / Cableguys https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=77744
- KVRian
- Topic Starter
- 1130 posts since 11 Aug, 2005 from Hamburg, Germany
Ok convinced.. within the next few hours we'll give a EUR 5/USD 7 discount on MidiShaper and on the Cableguys Bundle. So MidiShaper is EUR 15/USD 23 instead of EUR 20/USD 30.alexfalcao wrote:And I can't believe I missed this one.Shabdahbriah wrote:Aloysius wrote:Hmm ... Well, I hope you're not too strict on the time anyway!!!Jakob / CableGuys wrote:hmmm my post on the offer was from August 24..Aloysius wrote:Hope you're not too strict with the time. I'd really like to try this out later on today.Jakob / CableGuys wrote:Until 4pm CET today you can still buy MidiShaper for EUR 10/USD 15. I will then change the price to EUR 20/USD 30.
Use this coupon code when purchasing: C899AA3F
It's not that big of a discount, but MidiShaper's not too expensive anyway, so hope it suits you well.
-
- KVRian
- 1172 posts since 6 Mar, 2004
Great! Why is this information not in big red letters all over your website? If I can't find a mention of 64-bit support I assume that it is not supported, not the other way around. Only in the downloads section is it mentioned, which is imo "too far". I wasn't interested in downloading anything until I knew about 64-bit support.Jakob / CableGuys wrote:Yes! All our plugins are 64-bit as well.Liero wrote:64-bit?
-
- KVRist
- 217 posts since 5 May, 2006
It the coupon code still valid or expired?Jakob / CableGuys wrote:Use this coupon code when purchasing: C899AA3F
It's not that big of a discount, but MidiShaper's not too expensive anyway, so hope it suits you well.
"All persons living or dead are purely coincidental." - Vonnegut
-
- KVRAF
- 11311 posts since 18 Aug, 2007 from NYC
I'm a bit late to the news, but congrats on the RTAS release! Filtershaper is still an absolute favorite of mine, so I'm very happy to see the native PT version available!
-
Jakob / Cableguys Jakob / Cableguys https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=77744
- KVRian
- Topic Starter
- 1130 posts since 11 Aug, 2005 from Hamburg, Germany
Until November 1st we are doing a 33% discount on the Cableguys Bundle, which includes MidiShaper (as well as Curve, FilterShaper and VolumeShaper).
You can now get the Bundle for EUR 99/USD 129!
Find out more here: http://www.cableguys.de/shop-bundle.html
Upgrades to the Cableguys Bundle are also 33% off. Simply do it via your user account at cableguys.de
You can now get the Bundle for EUR 99/USD 129!
Find out more here: http://www.cableguys.de/shop-bundle.html
Upgrades to the Cableguys Bundle are also 33% off. Simply do it via your user account at cableguys.de
-
Jakob / Cableguys Jakob / Cableguys https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=77744
- KVRian
- Topic Starter
- 1130 posts since 11 Aug, 2005 from Hamburg, Germany
We've just updated all plugins, improving performance and memory usage a bit, as well as fixing drawing issues for older host sequencers.
And.. just few more days to get the Cableguys Bundle for EUR 99/USD 129, so that's Curve, FilterShaper, VolumeShaper and MidiShaper for less than the price of Curve.
More on that: http://www.cableguys.de
And.. just few more days to get the Cableguys Bundle for EUR 99/USD 129, so that's Curve, FilterShaper, VolumeShaper and MidiShaper for less than the price of Curve.
More on that: http://www.cableguys.de
-
Jakob / Cableguys Jakob / Cableguys https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=77744
- KVRian
- Topic Starter
- 1130 posts since 11 Aug, 2005 from Hamburg, Germany
Hey all, today's the last day to save big: Get the Cableguys Bundle for only EUR 99/USD 129 today (Nov 1st) at http://www.cableguys.de
It contains Curve, our community-driven software synthesizer with editable waveforms and preset sharing, FilterShaper for complex volume, pan and filter modulations, VolumeShaper for flexible volume modulation, simulating sidechain effect, .., and MidiShaper, the one this thread is all about.
It contains Curve, our community-driven software synthesizer with editable waveforms and preset sharing, FilterShaper for complex volume, pan and filter modulations, VolumeShaper for flexible volume modulation, simulating sidechain effect, .., and MidiShaper, the one this thread is all about.
-
Jakob / Cableguys Jakob / Cableguys https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=77744
- KVRian
- Topic Starter
- 1130 posts since 11 Aug, 2005 from Hamburg, Germany
We've just updated MidiShaper, it's now 1.1.4. Sometimes an LFO stopped playing after changing its sync mode, and produced spikes directly after playing a note. Both issues are fixed now.
So continuous development here. Throw your feature wishes at us for future versions.
So continuous development here. Throw your feature wishes at us for future versions.
-
- KVRer
- 21 posts since 3 Feb, 2006
This still does'nt work in Sonar 8.5.3 at all. As soon as you load the plug sonar becomes extremely sluggish and unresponsive.
I did test in bidule and it worked without any issues.
I did test in bidule and it worked without any issues.
-
Jakob / Cableguys Jakob / Cableguys https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=77744
- KVRian
- Topic Starter
- 1130 posts since 11 Aug, 2005 from Hamburg, Germany
Have you tried to raise the sample update rate to for example 512 samples? Maybe Sonar has problems handling lots of MIDI CC.stoutlyric wrote:This still does'nt work in Sonar 8.5.3 at all. As soon as you load the plug sonar becomes extremely sluggish and unresponsive.
I did test in bidule and it worked without any issues.
We've asked Cakewalk for a NFR version of Sonar some time ago but still have not gotten any reply. We've tested it with trial licenses before but they timed out. We could just purchase it, but it seems like rewarding them for not answering.
-
- KVRer
- 21 posts since 3 Feb, 2006
Jakob,
I did some more testing and I got it working. Here is what I found:
1) I had to go into the registry and change the "generate events" to 1 for the dll. Sonar require this to enable the midi out.
2) When I instantiated the vst from the track directly and enable midi out I got it to work!!!
3) When I started the vst from the synth rack then i got a bug where the wave was always flat and when you moved the nodes nothing happened to the wave.
4) I figured out what was causing the sluggishness. Whenever you assigned an audio out for midishaper then everything got really slow. Once I deleted the track for midishaper audio out then evrything was normal.
I'm going to post over on the sonar forums about cakewalk being lame and not getting you a copy for testing. Cakewalk reads that forum so maybe things can change.
I did some more testing and I got it working. Here is what I found:
1) I had to go into the registry and change the "generate events" to 1 for the dll. Sonar require this to enable the midi out.
2) When I instantiated the vst from the track directly and enable midi out I got it to work!!!
3) When I started the vst from the synth rack then i got a bug where the wave was always flat and when you moved the nodes nothing happened to the wave.
4) I figured out what was causing the sluggishness. Whenever you assigned an audio out for midishaper then everything got really slow. Once I deleted the track for midishaper audio out then evrything was normal.
I'm going to post over on the sonar forums about cakewalk being lame and not getting you a copy for testing. Cakewalk reads that forum so maybe things can change.