LinPlug

mabian · Post by **mabian** » Sun Jun 03, 2012 9:51 pm

Hello,

I am tweaking the sample start and end settings of a sample in a pad (which contains only that sample).

When I save and reload the project (REAPER 4.22x86, RMV 5.07 x86 version on Win 7 x64)) the sample start and end are reset to the status before I did the changes: and my edits are lost.

I think this is a bug.

Thanks,
Mario

dune_rave · Post by **dune_rave** » Wed Jun 06, 2012 7:42 pm

I managed to reproduce this behaviour!
I have an other thread here about the mute/solo setting that shows similar behaviour -reset to 0- after reopening. Dunno if these are Reaper issues or Linplug issues....

mabian · Post by **mabian** » Wed Jun 06, 2012 8:09 pm

Thank you for checking.

Honestly, I'm getting increasingly disappointed to discover those little things here and there in RMV that don't get fixed.

RMV needs a robust patch release to address this and other issues... soonish...

- Mario

Peter from LinPlug · Post by **Peter from LinPlug** » Thu Jun 07, 2012 11:09 am

No, sorry, cant replicate this either. Loading RMV 5.0.7 in 32 bit Reaper (first overlooked your specs and tried 64 bit), but in any case the sample start end were perfectly as set before. I tried with a random pad, sample slot and all fine. In other hosts its fine too (e.g. FL Studio 32 bit and Orion 64 bit).

mabian · Post by **mabian** » Thu Jun 07, 2012 11:55 am

I will try posting the fxp of the RMV settings...

it's completely reproducible here. at least in the project where it happens...

- Mario

dune_rave · Post by **dune_rave** » Thu Jun 07, 2012 4:09 pm

Hi! back to the sample start issue, I tried one thing and woW - that did something!!!

when you load a virtual instrument to track in Reaper,
you have the choice if you load as:

-default (set in prefs/vst)
-separate process
-dedicated process
-native only
-embed bridged UI

yOU CAN REACH THESE SETTINGS WHEN RIGHT CLICK THE VST, AND MOVE YOUR MOUSE OVER "RUN AS"

So I loaded RMV as separate process, and when I changed the sample start and saved the project, after reopening it was ok.
/More disturbing, when I went back to Run As default (set in prefs/vst) i couldn't reproduce the "bug" - it vanished.

dune_rave · Post by **dune_rave** » Thu Jun 07, 2012 4:27 pm

one more thing i realized:

1) loaded rmv /default (set in prefs)/

2) changed PAD5 sample start to about 7000
3) changed PAD9 sample start to about 7000
4) changed PAD13 sample start to about 7000

5) saved the project then quit

6) load saved project

!!!! Instead of PAD 1 I read PAD 13 !!!!!!!!

!!! AND THE SAMPLE STARTS ARE RESETED TO 0 !!!

dune_rave · Post by **dune_rave** » Thu Jun 07, 2012 4:39 pm

And I can find several PAD 13 through
pads 17-32 / 33-48.............

Peter from LinPlug · Post by **Peter from LinPlug** » Thu Jun 07, 2012 4:46 pm

Will try that tomorrow, thanks you for the detailled feedback! Hope I can shed more light on it now.

mabian · Post by **mabian** » Thu Jun 07, 2012 4:47 pm

Yes thanks a lot dune_rave for your thorough testing.

- Mario

dune_rave · Post by **dune_rave** » Thu Jun 07, 2012 4:58 pm

and i tried the above mentioned process (pad 5 / 9 / 13 sampe start change)
in FL 10.09.

After reopening the project , RMV was messy,
see the screenshots:
https://docs.google.com/folder/d/0B7uXx ... edit?pli=1

mabian · Post by **mabian** » Thu Jun 07, 2012 9:16 pm

Here is a zip file containing:

- REAPER project
- REAPER fx chain
- fxp file (seems only contains a single pad data)
- fxb file
- Jpgs of pad sample config before saving project and after reload: the sample start and end are reset.

http://www.errepici.it/public/Test/RMV_Shine_Test.zip

No matter if I try loading the fxp, fxb or fx chain files in a brand new project, the sample start and end settings in "clap3" pad are never restored properly.

Hope it helps,
Mario

Peter from LinPlug · Post by **Peter from LinPlug** » Fri Jun 08, 2012 5:43 am

Thank you Mario, Dune,
you gave me something to do

Will get back to you once I know more.

Peter from LinPlug · Post by **Peter from LinPlug** » Fri Jun 08, 2012 10:57 am

I could reproduce the Sample Stat / End point vanishing (Thanks Mario, the Reaper project was required, as it allows me to actually see the bug and trace it back). So that can be fixed with version 5.0.8.
However, I cant reproduce any of the effects Dune described. They also cannot be explained from the proglem that I located. In fact the image before saving the project already looks suspicious (the RMV gui isnt complete, in example the matrix is empty ???). I know that (fortunately for very few people) our plugin have graphic issues in FL Studio; but as I understood there should be more of a problem. Sorry cant yet trace this one.

mabian · Post by **mabian** » Fri Jun 08, 2012 11:55 am

Great!

Any idea you can share about when the next version could be available?

This is a kind of showstopper for me...

- Mario

LinPlug

KVR Audio

RMV loosing sample start/end settings on save and reload project