KVR Audio

elcallio · Post by **elcallio** » Fri Oct 12, 2012 2:25 pm

Crackbaby wrote:Is there a new beta coming out soon?

Also: Having bought it and put the file where it should be (i hope), is there yet a way to verify that it is the pro version i have? It says Free version in the UI but it's still beta so ...

Main reason i ask for new version of beta is that i think i've encountered a bug where i can't add new groups or channels ... but that might have been sorted already. It's probably quite hard to reproduce it!

edit: i just managed to do it. All i did was drag'n'drop files from explorer (win7) and after the third one black boxes started to appear and after that adding groups/channels/whatever-else-there-may-be stopped working

Just any files, or specific ones? I'd like some more info to reproduce this.
And the new beta is scheduled for Sunday.
Cheers

A.Kurbel · Post by **A.Kurbel** » Fri Oct 12, 2012 2:30 pm

yeah elcallio, please do the cubase drag'n'drop thing!
it will make your good plugin even better

Crackbaby · Post by **Crackbaby** » Fri Oct 12, 2012 3:52 pm

@elcallio The files were from http://www.adventurekid.se/akrt/wavefor ... waveforms/ so singlecycle waveforms

ACR23 · Post by **ACR23** » Fri Oct 12, 2012 4:17 pm

@elcallio could you reproduce the bug? will you fix it in the next version?

+1 for cubase dnd!

Compyfox · Post by **Compyfox** » Fri Oct 12, 2012 4:35 pm

Hm... I know I'll get burned for this, but what about a Mac port?

Oh and I'm still for 22kHz/32kHz and 8/12/14/16 bit modes.

elcallio · Post by **elcallio** » Fri Oct 12, 2012 4:36 pm

Compyfox wrote:Hm... I know I'll get burned for this, but what about a Mac port?

Oh and I'm still for 22kHz/32kHz and 8/12/14/16 bit modes.

Mac port will come after TX Pro is done. I.e sometime early next year.

elcallio · Post by **elcallio** » Sun Oct 14, 2012 12:53 pm

Just an update to let you all know that the second beta of TX16Wx 2.0 has been released. See first page of post or the blog for details.

http://tx16wx.blogspot.com
http://www.tx16wx.com/

sinkmusic · Post by **sinkmusic** » Sun Oct 14, 2012 1:09 pm

Amazing update !
Thank you

Jonathan Shepherd · Post by **Jonathan Shepherd** » Sun Oct 14, 2012 2:33 pm

Wow, now THAT's an update. Just preordered the pro version and now my conscience is clear, or it's a little clearer anyways. This is shaping up to be the sampler monster I've imagined. Folks, support this man if you love sampling, puppies, or life in general. I'll be skipping a few Chinese buffets in the next few weeks but it's worth it. Thanks mate!

A.Kurbel · Post by **A.Kurbel** » Sun Oct 14, 2012 2:45 pm

->Fixed drag and drop from Cubase media bay

you totally rock, elcallio!

DarkStar · Post by **DarkStar** » Sun Oct 14, 2012 4:55 pm

OK, I must be missing something simple.

How do I get a sample to be mapped to only one key? In the screenshot below, I selected 4 samples (in pitch order) and dragged and dropped them into the Keyboard Mapper:
-- the first sample was mapped over 2 octaves (and has 2 different names in its map area,
-- the second and third to one key each,
-- and the fourth to 6 keys.

Big pic: http://i.imgur.com/qQznO.png

Also:
(a) if I delete a Group, the samples still remain loaded; how do I get them from the Sample Editor back into the Keyboard Mapper again?

(b) Note the graphics glitch in the Group (above C4)

(c) the sample sizes in the Browser are not very meaningful - the C#3 is 1,833KB, the B4 is 1,097KB; both are listed as 1M

(d) if I view a sample in the Sample Editor I get a .reapeaks file created in my sample folder!
-- while the view is similar to a Reaper .reapeaks file, should the same file extension be used?
-- and I would welcome the option to put these files in a defined location, so that I can delete them all easily.

lalo · Post by **lalo** » Sun Oct 14, 2012 5:12 pm

thanks for the new beta!
seems that the plugin window is not big enough to read clearly the bottom line ( see where the filter type is )

thanks

a.

DarkStar wrote:OK, I must be missing something simple.

How do I get a sample to be mapped to only one key? In the screenshot below, I selected 4 samples (in pitch order) and dragged and dropped them into the Keyboard Mapper:
-- the first sample was mapped over 2 octaves (and has 2 different names in its map area,
-- the second and third to one key each,
-- and the fourth to 6 keys.

Big pic: http://i.imgur.com/qQznO.png

Also:
(a) if I delete a Group, the samples still remain loaded; how do I get them from the Sample Editor back into the Keyboard Mapper again?

(b) Note the graphics glitch in the Group (above C4)

(c) the sample sizes in the Browser are not very meaningful - the C#3 is 1,833KB, the B4 is 1,097KB; both are listed as 1M

(d) if I view a sample in the Sample Editor I get a .reapeaks file created in my sample folder!
-- while the view is similar to a Reaper .reapeaks file, should the same file extension be used?
-- and I would welcome the option to put these files in a defined location, so that I can delete them all easily.

elcallio · Post by **elcallio** » Sun Oct 14, 2012 5:28 pm

DarkStar wrote:OK, I must be missing something simple.

How do I get a sample to be mapped to only one key? In the screenshot below, I selected 4 samples (in pitch order) and dragged and dropped them into the Keyboard Mapper:
-- the first sample was mapped over 2 octaves (and has 2 different names in its map area,
-- the second and third to one key each,
-- and the fourth to 6 keys.

Big pic: http://i.imgur.com/qQznO.png

Also:
(a) if I delete a Group, the samples still remain loaded; how do I get them from the Sample Editor back into the Keyboard Mapper again?

(b) Note the graphics glitch in the Group (above C4)

(c) the sample sizes in the Browser are not very meaningful - the C#3 is 1,833KB, the B4 is 1,097KB; both are listed as 1M

(d) if I view a sample in the Sample Editor I get a .reapeaks file created in my sample folder!
-- while the view is similar to a Reaper .reapeaks file, should the same file extension be used?
-- and I would welcome the option to put these files in a defined location, so that I can delete them all easily.

1.) When dragging samples with root key info, TX16Wx will by default map them according to root. To bypass this, either disable pitch-mapping entirely in settings, or simply hold the ALT key while dropping the samples to force pitch-less (single key) mapping.

2.) Simply drag the samples from the sample list in sample editor to the key mapper.

3.) I am aware of that glitch, its weird. Windows leaves a bit of the mouse pointer. I do not control it in any meaningful way...

But I'll work on it.

4.) Noted. Sizes should probably be 1.8Mb etc

5.) The reapeaks files created are (or should be) fully compatible with reaper created ones (uses the reaper peak format, since its at least documented.

Peak files in specific folders is not exposed as a setting yet. Its coming...

TheWhistler · Post by **TheWhistler** » Sun Oct 14, 2012 7:04 pm

Even the newest version seems to crash REAPER in a way that I can't even terminate the process structure.
That is going to be a bit annoying. I can send you the files if you want.
But I wont try to reproduce myself.

elcallio · Post by **elcallio** » Sun Oct 14, 2012 7:18 pm

Psychiatric Nurse wrote:Even the newest version seems to crash REAPER in a way that I can't even terminate the process structure.
That is going to be a bit annoying. I can send you the files if you want.
But I wont try to reproduce myself.

Please send any info / files you have. I did notice that reaper as well as cubase causes the 800x600 and 1024x600 resolutions to clip the bottom of the screen. Weird. Will check. Might have to hotfix this.

TX16Wx Software Sampler 2.0 Beta Released - Announching TX16Wx Professional (Updated 2012-10-19)