KVR Audio

graywolf2004 · Post by **graywolf2004** » Sun Jun 09, 2013 9:16 pm

sinkmusic wrote:Thank you
Here are some color variations i had think of...

I almost finished with your brown scheme + gui image with color legend. Will upload in in several days and then you can do other schemes yourself

sinkmusic · Post by **sinkmusic** » Sun Jun 09, 2013 9:28 pm

Ah, great, thank you Graywolf !
Yes, a color legend should help making my own schemes

graywolf2004 · Post by **graywolf2004** » Mon Jun 10, 2013 8:10 am

chardin wrote:BlueARP is awesome!
One issue I have is with the "Input range (truncate)" in the "Input Filter" section. If I set the range from C0 to C5, any notes above C5 are ignored.
I know this is working as designed. However, could there be an option where MIDI notes outside the range are passed through? This would allow for arpeggios in the left hand and solos in the right hand using the same synth/track. Maybe a check box to toggle truncate/pass through? Or perhaps an .ini setting?
Many thanks for a wonderful arp!

I know, it's the way it works in Kirnu, but I designed BlueARP for multi-track performances. This way you can split your keyboard and use several instances of BlueARP with several synths instead of one.

As a workaround, you can do the following - use 2 instances of bluearp with 2 input ranges, for 1st instance turn off "arp enabled" - it will pass notes thru for it's input range.

ThrashJazzAssassin · Post by **ThrashJazzAssassin** » Tue Jun 11, 2013 1:16 pm

graywolf2004 wrote:Changes:
2. Passes all controller midi data thru (CC's, pitchbend, aftertouch messages)

Thanks a lot Oleg!

Small bug: If Arp Latch is on when switching patch, it remains on even if the new patch is not latched.

graywolf2004 · Post by **graywolf2004** » Tue Jun 11, 2013 9:38 pm

Update: BlueARP v1.12rc1
http://www.graywolf2004.net/files/BlueARP_v1.12rc1.zip

Changes:
1. Added nice brown color scheme by sinkmusic, gui image with color legend included
2. implemented GetProgramNameIndexed method (without it FL Studio calls
setProgram() many times on each program change)
3. Fixed arp latch bug reported by ThrashJazzAssassin

PS. Selected color scheme is stored in ini file, so it's kind of global setting. I didn't make a way to use several instances with several colors.

sinkmusic · Post by **sinkmusic** » Tue Jun 11, 2013 10:11 pm

Thank you !

graywolf2004 · Post by **graywolf2004** » Wed Jun 12, 2013 10:58 am

sinkmusic wrote:Thank you !

You're welcome, send me .ini when you done to include your schemes into the next release, if you don't mind

These gray schemes should fit nice into Ableton, brown one looks good in FL.

ghostfader · Post by **ghostfader** » Wed Jun 12, 2013 11:55 pm

Can't wait to try it! Thanks for the job.

A.M. Gold · Post by **A.M. Gold** » Thu Jun 13, 2013 5:56 am

I'm having problems in Reaper with the two latest versions not holding the chosen settings or preset even while project is open. I set up BlueARP, then go to another plug-in, then bring up the BlueARP GUI again, and it has reverted to another preset, and it's always the same one---number 51, Seq 3k Sync+Swing trick. Today it has done this off and on but tonight for some reason it just keeps doing it.

A.M. Gold · Post by **A.M. Gold** » Thu Jun 13, 2013 6:01 am

Now I just deleted and reloaded it on the same track and now it is holding the settings. The problem seems to have something to do with what order you load it onto a track. Or maybe you just have to delete and reload it every time it gets stuck like this. I'm not sure what's happening.

ZXOxo67 · Post by **ZXOxo67** » Thu Jun 13, 2013 6:41 am

A.M. Gold wrote:I set up BlueARP, then go to another plug-in, then bring up the BlueARP GUI again, and it has reverted to another preset, and it's always the same one---number 51, Seq 3k Sync+Swing trick.

Hello, same in FL Studio 11

graywolf2004 · Post by **graywolf2004** » Thu Jun 13, 2013 2:40 pm

It's probably because I implemented GetProgramNameIndexed method. So now current program number should be stored within a bank (and it is stored), host won
t set last active program on project load. I'll check this ASAP.

ZXOxo67 · Post by **ZXOxo67** » Thu Jun 13, 2013 7:31 pm

Please can you tell about what color-codes you are using in the ini file?
If i use a hex-code in paint.net or photoshop (example #ff0000 red), in bluearp its a bright blue.
or is it a view problem in the fl wrapper?

graywolf2004 · Post by **graywolf2004** » Thu Jun 13, 2013 8:33 pm

ZXOxo67 wrote:Please can you tell about what color-codes you are using in the ini file?

it goes reversed, like $BBGGRR - where BB - hex blue level etc.

ZXOxo67 · Post by **ZXOxo67** » Fri Jun 14, 2013 9:26 pm

graywolf2004 wrote:
ZXOxo67 wrote:Please can you tell about what color-codes you are using in the ini file?
it goes reversed, like $BBGGRR - where BB - hex blue level etc.

hi, i played a bit with fl colors, hier is the ini code.
i have no picture host account, so i cant show a picture.

[scheme_fl]

// -- drag box
box_LineColor=$856A67
box_FillColor=$594341
box_FillColorActive=$6B504D
box_FontColor=$B49E9C
box_FontColorActive=$FFFFFF
box_LabelFontColor=$AFAAA1
box_LabelFontColorInActive=$E0C5C2
box_LabelFontColorHighlight=$FFFFFF

// -- drag box bar
bar_FillColor=$7C6E6C

// -- button
btn_FillColor=$5B403D
btn_FillColorActive=$B4A6A4

// -- LED
led_BackColor=$000000
led_OnColorOuter=$00B3FF
led_OnColorInner=$00E6FF
led_OffColorOuter=$005D9E
led_OffColorInner=$005D9E

// -- stats panel Label
info_panel_LabelFontColor=$AFAAA1

// -- screen (matrix editor)
scr_BackColor=$7C6E6C
scr_GridBackColor=$422C2A
scr_LineColorBright=$5A4442
scr_LineColorDark=$4A3432
scr_BrickColorOn=$A89794
scr_BrickColorOff=$664B48

// -- block label (yellow lines)
panels_BlockLabelColor=$0000ff

// -- globals
panels_BackColor=$6D685F
panels_OutlineColor=$A6908E
panels_TopPanelColor=$6D685F
panels_SettingsPanelColor=$422C2A
panels_InfoPanelColor=$422C2A

BlueARP VST Arpeggiator development - let's discuss! (Apple M1 ready, 4K)