KVR Audio

fateamenabletochange · Sat Mar 29, 2014 2:38 am

Hink wrote:
someone should get black knobs or mr clean

nah, bit of crust is ok, helps hold things together

Hink · Post by **Hink** » Sat Mar 29, 2014 2:44 am

fateamenabletochange wrote:
Hink wrote:
someone should get black knobs or mr clean

nah, bit of crust is ok, helps hold things together

3 or 4 years ago I got some wood cleaner and cleaned my warmoth (which is just a waxed finish) and it was amazing, I washed off like a decade of dna as I dont play it as much as I did when it was one of two guitars I owned it hasn't got that dirty again but it still has my dna

we wont even talk about how funky my strings get after a few years

fateamenabletochange · Sat Mar 29, 2014 2:47 am

Uncle E wrote:
fateamenabletochange wrote:
Someone likes a twangy bridge and dark in between positions. I'm exactly the opposite of you, I keep the bass sides of my neck and middle pickups screwed way down and the treble side of my bridge pickups screwed way down.

ahem, kind of 'evolved' that way

like I said, mostly being held there by dirt, turn some of those screws and nothing much happens, but ain't completely broke yet

fateamenabletochange · Sat Mar 29, 2014 2:51 am

Hink wrote:
fateamenabletochange wrote:
Hink wrote:
someone should get black knobs or mr clean

nah, bit of crust is ok, helps hold things together
3 or 4 years ago I got some wood cleaner and cleaned my warmoth (which is just a waxed finish) and it was amazing, I washed off like a decade of dna as I dont play it as much as I did when it was one of two guitars I owned it hasn't got that dirty again but it still has my dna

we wont even talk about how funky my strings get after a few years

will keep it in mind when the day comes I really have to do something about a tidy up. Coarse I worry I'd put the wrong stuff on, and everything would dissolve.

werp · Post by **werp** » Sat Mar 29, 2014 3:43 am

I had to move out of this room because of lack of space.
not shown...Vox Virage, Fender Cabronita, Dean Cadillac, GRB Kokocaster, Line 6 JTV 59, Tokai Beatle bass, Epiphone Zenith bass. you can see the edge of the line 6 variax 600.

tapper mike · Post by **tapper mike** » Sat Mar 29, 2014 4:03 am

Damn a G-707 I had one of those. Also had an ibanez X-ing 2010

werp · Post by **werp** » Sat Mar 29, 2014 4:09 am

alas, the brain for the 707 is no more...no big deal anyway, the Ibanez has a GK3 pick-up mounted on it.
I am contemplating a Fishman triple play...

tapper mike · Post by **tapper mike** » Sat Mar 29, 2014 5:43 am

I don't think you'd be able to recreate that Jim Stafford thing using the voltage knobs with a fishman

tapper mike · Post by **tapper mike** » Sun Mar 30, 2014 7:44 pm

Aww come on guys, I thought people would be more active in this thread showing off thier axes'

Here's my Chinese made Rondo SX Furrian

furrian.jpg

This is the deluxe model with belly cut and forearm cut.
It has a maple neck with a maple fretboard but it's not a one piece. The body is a three piece swamp ash though I can't tell where they were joined. I need to take this to a shop where they can properly level, dress and polish the frets. The neck is actually quite comfortable for smaller hands. It's a C shape deeper then my strat plus but more shallow then my blactopn Also with a smaller width and a 12 inch radius with medium jumbos/ It's a 21 fret instrument with vintage output single coil pickups.

Guess it's past time to clean up the balcony.
Also get up earlier. my balcony has a north east exposure.

Hink · Post by **Hink** » Sun Mar 30, 2014 8:44 pm

my Ibanez RG 1550m

Features

Body style: RG
Body wood: Basswood
Neck type: Wizard Prestige
Fingerboard: Maple
Frets: 24 jumbo
Bridge: Ibanez Edge Pro
Case: Deluxe Prestige Hardshell
Bridge pickup: V8 Vintage 8 alnico magnet humbucker
Middle pickup: S1 Single 1 alnico magnet single-coil
Neck pickup: V7 Vintage 7 alnico magnet humbucker

I have this quite a while and what sets this guitar apart from any other I have is I have never taken this guitar apart

All I have ever done is change the strings and then I only have done that once...mod free

I do really like this guitar as it is

tapper mike · Post by **tapper mike** » Sun Mar 30, 2014 10:25 pm

Nice Hink, Thanks for sharing. That is one sharp axe you have there.

tapper mike · Post by **tapper mike** » Sun Mar 30, 2014 10:36 pm

Here is my Parker P44 (made in Korea)

It has a bolt in maple neck. 22 Stainless Steel frets along a flat ebony fretboard.

The body is one piece mahogany.

The trem is a traditional 5 spring thing (kind of stiff for my tastes but I'm reluctant to adjust it.

The pickups are standard size humbuckers that are "inspired" from the early seymour duncan models. Making it bright and ritzy. They are coil tapped via the tone control push/pull pot so either both are single or both are humbuckers. A single volume pot for the magnetic pickups and a surprisingly well balaned piezo. The piezo has no tone adjustment it's a simple straight foreward volume with a separate three way switch for magnetic, both or piezo.

parkerp44.jpg

chokehold · Post by **chokehold** » Sun Mar 30, 2014 10:50 pm

Custom Halo Morbus 7-string.
The finish is ... below expectations, but handling and sound are... <3
Quite some tense cables on there, so carpal -- here we come! :harp:

yomanfree · Post by **yomanfree** » Sun Mar 30, 2014 11:09 pm

Bacchus Duke, G&L S500, Washburn N2 (customized) ....

IMG_9279.jpg

IMG_6501.jpg

IMG_6505.jpg

yomanfree · Post by **yomanfree** » Sun Mar 30, 2014 11:13 pm

And Tanglewood TW45 Heritage

IMG_6510.jpg

IMG_6509.jpg

The Guitar Show (Show yours)