Official Xils3 LE V2 Analog Modular ( The EMS VCS 3 Emulation )( CM version Released )

[Lotuzia]

If there a change list of a kind, to learn what's new in V2 compared to Xils3 LE?

Very short list : Now last generation 0df non linear filters. Polyphonic VCA engine completely rewritten ( now HUGE dynamics) Polyphonic Ring Modulator ( was Mono) WaveShaping on all oscillators ( before Sine oc was buggy, triangle could be buggy under certain circonstances ) Enhanced Sequencer behaviour and edition enhanced, Revamped GUI, a myriad of small bugs that could occasionally happen fixed ( inherent to the hundreds of connexions you can establish in a full modular synth ) new presets added, rewriting of the manual ( that needs still more rewriting ). etc etc etc. I cant remember all, but the Xils3 LE V2.0 alone was more than a full month of work for everybody here. Not counting the full months spent on the Xils 3 V2, and the Xils 4, wich the LE version inherits.

And if you're an LE 1st version owner, yes, you get all this for free.

Out of interest...what if you get it through the old audiomidi 'no brainer'? As it wasn't bought through the site, it's not a 'registered' version, apparently. Edit: i don't have the old version on my machine currently, and can't see an 'add serial number' link in the GUI?

It will work also with this old version.
As a side note, Xils3 LE V2 will never be available again with external vendors. After this event is finished, it will only be available thru Xils site and will cost 34 € msrp/ We stopped all external distribution for this synth, be it the new or old versions.

[blatanville]

You can now open the Xils3 LE V2, and use the 'Import bank' function, and Xilssentials should immediately show in the Le browser.

The Import Bank function isn't working for me. I'm using Xils 3 LE v2 in REAPER (current version) one Windows 8.1 64-bit.

any thoughts?

[A.M. Gold]

Sorry if all this has been answered before, i don't have time to go through all 24 pages.

I bought the 10 Euro version with the extra sound set included but no instructions came with the sound set. How do I load it/where do I put it? There is no specific labeled preset folder with Xils 3.2 LE.

Also, I installed the non-demo version of Xils 3.2 LE but it hasn't asked me for any activation of the license (I received a license code by email). Is this plug-in eLicenser protected? Does it function normally without activating the license? It seems to be working.

[Lotuzia]

You can now open the Xils3 LE V2, and use the 'Import bank' function, and Xilssentials should immediately show in the Le browser.

The Import Bank function isn't working for me. I'm using Xils 3 LE v2 in REAPER (current version) one Windows 8.1 64-bit.

any thoughts?

Except if you have installed the LE V2 in a folder where you dont have admin rights in win8, no. I'll transmit your message and report back asap.

[BlackWinny]

We want it in every home As simple as that.

Hmmm... It was something said precisely by Peter Zinovieff! So... it's a very kind wink to the original gem!

Sure that you know these three adverts, Laurent, but it's for me the occasion to show them to all those who are new in the world of the EMS VCS3 (and as Laurent and Xavier already know, I'm a very old collector of the things related to the VCS3, in my 15 I was in a little regional band of 5 amateur musicians who had one, the exact owner was not the keyboardist (me) but the drummer, whose father was surgeon at the hospital of Tours, in the center of France). I let you discover or remind these three adverts:





Every Picnic Neeeds A Synthi

(Peter Zinovieff, with family and friends, running a Synthi A and DK1 off batteries on the Isle of Raasay)

[blatanville]

Except if you have installed the LE V2 in a folder where you dont have admin rights in win8, no. I'll transmit your message and report back asap.

thanks.

[Lotuzia]

Sorry if all this has been answered before, i don't have time to go through all 24 pages.

I bought the 10 Euro version with the extra sound set included but no instructions came with the sound set. How do I load it/where do I put it? There is no specific labeled preset folder with Xils 3.2 LE.

Hi Am Gold,

Thanks for getting it.

The soundset should be in your Xils account normally. There was a problem with adding soundsets when purchased in bundle in the php script but I thought it was fixed, as some other users reported they found it now. If its still not there tomorrow, please contact me thru Pm and well find a solution./

[Lotuzia]

We want it in every home As simple as that.

Hmmm... It was something said precisely by Peter Zinovieff! So... it's a very kind wink to the original gem!

Sure that you know these three adverts, Laurent, but it's for me the occasion to show them to all those who are new in the world of the EMS VCS3 (and as Laurent and Xavier already know, I'm a very old collector of the things related to the VCS3, in my 15 I was in a little regional band of 5 amateur musicians who had one, the exact owner was not the keyboardist (me) but the drummer, whose father was surgeon at the hospital of Tours, in the center of France). I let you discover or remind these three adverts:





Every Picnic Neeeds A Synthi

(Peter Zinovieff, with family and friends, running a Synthi A and DK1 off batteries on the Isle of Raasay)

Just ................. AWSOME Jacques !!!

[mgriff]

You can now open the Xils3 LE V2, and use the 'Import bank' function, and Xilssentials should immediately show in the Le browser.

The Import Bank function isn't working for me. I'm using Xils 3 LE v2 in REAPER (current version) one Windows 8.1 64-bit.

any thoughts?

Except if you have installed the LE V2 in a folder where you dont have admin rights in win8, no. I'll transmit your message and report back asap.

Import Bank is not working for me either. Using in Reaper4 & Sonar X3. Windows 7 64bit. With admin rights.

[A.M. Gold]

Sorry if all this has been answered before, i don't have time to go through all 24 pages.

I bought the 10 Euro version with the extra sound set included but no instructions came with the sound set. How do I load it/where do I put it? There is no specific labeled preset folder with Xils 3.2 LE.

Hi Am Gold,

Thanks for getting it.

The soundset should be in your Xils account normally. There was a problem with adding soundsets when purchased in bundle in the php script but I thought it was fixed, as some other users reported they found it now. If its still not there tomorrow, please contact me thru Pm and well find a solution./

Thanks for the reply,

No, I got the link to the sound set and downloaded it. I don't know how to get Xils 3.2 to find it. Where on my XP machine am I supposed to put it so the plug-in finds it? There were no instructions with the download.

Right now I have it in the folder with the Xils 3.2 VST plug-in but it isn't in a specific preset folder, it's just sitting there next to the .dll.

I installed all the program file type data in my program files folder but there was no preset subfolder that was installed.

[A.M. Gold]

Deleted, I'm not used to using the new KVR.

[A.M. Gold]

Deleted

[Lotuzia]

You can now open the Xils3 LE V2, and use the 'Import bank' function, and Xilssentials should immediately show in the Le browser.

The Import Bank function isn't working for me. I'm using Xils 3 LE v2 in REAPER (current version) one Windows 8.1 64-bit.

any thoughts?

Except if you have installed the LE V2 in a folder where you dont have admin rights in win8, no. I'll transmit your message and report back asap.

Import Bank is not working for me either. Using in Reaper4 & Sonar X3. Windows 7 64bit. With admin rights.

Hmmm we'll look into that asap. You''re now two people with import bank problems. I'll report asap.

Thanks for the report. Mgriff and AM Gold. We are known to fix bugs very quickly.

[A.M. Gold]

Actually, I figured it out. I just left Xilssentials in my VST folder and used import bank to find it and it worked.

I'm also on Reaper 4 but I'm on XP so maybe that's why I didn't have a problem.

[PaulSC]

Name guess: CodeX ?

Ha!