KVR Audio

the3ug3reeder · Post by **the3ug3reeder** » Sat Apr 23, 2016 11:18 am

the iLok License manager blues...

to my knowledge i didn't change anything on my system.

i followed the instructions and rebooted... that didn't fix it, so i went to iLok.com and ran the latest License Support installer. rebooted again. that didn't fix it either.

i could cry. just wanted to make some beats.

has anyone else had this problem?

EvilDragon · Post by **EvilDragon** » Sat Apr 23, 2016 11:19 am

Did you try to fully uninstall iLM first?

fmr · Post by **fmr** » Sat Apr 23, 2016 11:28 am

If you updated the iLok License Manager, then it probably changed the settings for the system server routine, You need to go to Services and select the proper settings (they don't fix this anymore

).

1. Click on the Windows button, and on the search space type "services"
2. Select the program with the cog wheel icon
3. Once open look for "PACE License Services"
4. Click over it with the right mouse button and select Properties in the contextual menu
5. In Startup Type choose "Automatic (Delayed Start) - by default it's probably selected "Automatic"
6. While you're at it, you can hit start this time, to be sure you have it running without having to restart the system.
7. Click Apply

This should solve the problem (until the next update, at least).

kokotte · Post by **kokotte** » Sat Apr 23, 2016 11:47 am

thanks ED for the response but i can't make it working, i must doing something wrong, sometimes, keyswitch appears in blue on the keyboard/normal, but sometime, nothing(with the same setting...)
in the factory bank, i didn't see any programme who use keyswitchs for give me an exemple,
in kontakt, i can create keyswich smootly, not in falcon, it's why i think i misunderstand something

Sampleconstruct · Post by **Sampleconstruct** » Sat Apr 23, 2016 12:01 pm

kokotte wrote:thanks ED for the response but i can't make it working, i must doing something wrong, sometimes, keyswitch appears in blue on the keyboard/normal, but sometime, nothing(with the same setting...)
in the factory bank, i didn't see any programme who use keyswitchs for give me an exemple,
in kontakt, i can create keyswich smootly, not in falcon, it's why i think i misunderstand something

Check out my patch "Sonar Drops" in the Falcon factory library, it uses key-switches and should be self-explanatory.

Sampleconstruct · Post by **Sampleconstruct** » Sat Apr 23, 2016 12:04 pm

Sampleconstruct wrote:
kokotte wrote:thanks ED for the response but i can't make it working, i must doing something wrong, sometimes, keyswitch appears in blue on the keyboard/normal, but sometime, nothing(with the same setting...)
in the factory bank, i didn't see any programme who use keyswitchs for give me an exemple,
in kontakt, i can create keyswich smootly, not in falcon, it's why i think i misunderstand something
Check out my patch "Sonar Drops" in the Falcon factory library, it uses key-switches and should be self-explanatory.

So does my patch "Ghost Flutes" in the factory library.

kokotte · Post by **kokotte** » Sat Apr 23, 2016 12:15 pm

thanks Simon,
i was thinking keygroup, but i must think, layer !
now all is ok, like i said, i'm a falcon noob

Sampleconstruct · Post by **Sampleconstruct** » Sat Apr 23, 2016 1:40 pm

kokotte wrote:thanks Simon,
i was thinking keygroup, but i must think, layer !
now all is ok, like i said, i'm a falcon noob

Yes, layer rules, not keygroup rules. You can also setup round robin chains on keygroup/oscillator level without having to use layer rules.

the3ug3reeder · Post by **the3ug3reeder** » Sat Apr 23, 2016 2:25 pm

Thanks EvilDragon, thanks Fernando!
i did what you said, and now it works again.
thank goodness!

SJ_Digriz · Post by **SJ_Digriz** » Sat Apr 23, 2016 3:06 pm

I'm probably being a dumbass, but I'm trying to create an old thing I used to do with a tape echo and mellotron. You split the output to the tape and direct mic. Then you manually speed/slow the tape. It creates pitch swoops around the chords. Leading to the question. All the delays seem to be DAW tempo locked (1/2, 1/4 tri, etc..) So it steps through speed change instead of sweep through time based. Is there a way to get them to be time based so that the sweep/smooth instead of stepped? Stepped has a cool result by the way. So I'm getting a great patch. But, I was hoping for the other one too.

EDIT: Never mind. 5 seconds after posting .. I found it .. of course.

the3ug3reeder · Post by **the3ug3reeder** » Sat Apr 23, 2016 3:26 pm

release.jpg

in the Multi Envelope, is it possible to have more than one point in the release stage?

Muziksculp · Post by **Muziksculp** » Sat Apr 23, 2016 3:40 pm

Hi,

I will email UVI's Tech. Support, and see if they can help sort this out.

Anyone Running Cubase Pro 8.5.15 on Windows 8.1 , and Falcon ? are you able to run it as a standalone ? does it work fine as a VST in Cubase ?

Thanks,
Muziksculp

c_voltage · Post by **c_voltage** » Sat Apr 23, 2016 5:33 pm

Sampleconstruct wrote:Quick and dirty demonstration of dialing in a pad sound with the analog stack oscillator in UVI Falcon, applying detuning/panning and modulations to the individual oscillators to create a unison sound, later adding wave-shaping, filtering and FX processing. I could have applied more LFOs to the individual volume levels of each osc to create more animation/movement, but I was too lazy.

Good "moving" timbre btw about 5:20-5:30, slightly reminded tron legacy )

DocAtlas · Post by **DocAtlas** » Sun Apr 24, 2016 11:39 pm

voon wrote:Falcon isn't perfect.

- The soundlibrary has no tags nad makes finding sounds hard. NI does this far better.
- The FM Oscillator could have 6 Operators to be a DX7
- Falcon can not be used as an FX plugin for external sources
- It's not THAT efficient on CPU with some sounds
- It doesn't have the sample editing possibilities of Kontakt

Nevertheless, I love it and it is very good Could be better, though. still.

Since you can load more than one 4-op FM oscillator in Falcon, you can already duplicate all of the algorithms in the DX7, except for the few that have the feedback loop between several operators. One advantage to a system like Falcon's is that you can have as many oscillators loaded as your system can handle.

Rather than simply duplicate the original DX7, I'd like to see each operator have the non-sine waveforms that the TX81Z (8) and SY77 (16) had. That can really expand the possibilities. If more operators were added, I'd rather see a sample-based oscillator, to do some of the kinds of things you could do on the SY77/99. As far as I know, the Korg Kronos is the only synth available right now that can do that, and it's a bit pricey, as well as requiring room I don't have. It would be really great if audio-rate signals from other oscillators could be used as modulators for the operators in Falcon, but I'm not sure that's going to happen. Adding an extra PCM operator might be simpler.

On the other hand, if the FM oscillator in Falcon evolves over time into something that can cover the territory of the SY77, FS1R, and beyond, I won't complain.

I kind of doubt we'll see the ability to use Falcon as an insert effect; that would give those of us who haven't bought Sparkverb free access to it. One workaround is to render whatever you want to process with Falcon as wav/aiff or whatever, then play it back with one of the sample oscillators.

c_voltage · Post by **c_voltage** » Mon Apr 25, 2016 12:02 am

Hm different waveforms (additionally to sinus) in fm osc would be really good.

UVI Falcon - v4 = 2026 released - rumors, ads, praise, kindergarden, auto-sampling and off-topic inside!