Roger Linn Design

PHY6 · Post by **PHY6** » Fri Oct 14, 2016 9:01 pm

1.2.5 update

BobDog · Post by **BobDog** » Fri Oct 14, 2016 9:01 pm

PHY6 wrote:
PaulSchilling wrote:

What's the clapping about....?

Probably about the fact we have a new version with a sequencer which is what the thread is about!

PHY6 · Post by **PHY6** » Fri Oct 14, 2016 9:03 pm

gbevin wrote:
PHY6 wrote:Updater failed. Still no lights.
It's seems really dead....gutted
It might not show the FWUP text if the firmware writing was wrongly done. Press Global Settings while you connect the USB cable, it might stay blank. Then launch the firmware upgrader from version 1.2.5 (not from 2.0.0).

It will not be able to retrieve the settings btw.

Just did that, see pictures I posted.

PHY6 · Post by **PHY6** » Fri Oct 14, 2016 9:07 pm

Before the Fail message it said Linnstrument is prepared...

gbevin · Post by **gbevin** » Fri Oct 14, 2016 9:17 pm

What happens after "Performing upgrade with default settings" on v1.2.5? I don't see a failure message in your screenshots.

PHY6 · Post by **PHY6** » Fri Oct 14, 2016 9:21 pm

PHY6 · Post by **PHY6** » Fri Oct 14, 2016 9:29 pm

gbevin · Post by **gbevin** » Fri Oct 14, 2016 9:47 pm

Can you try with another USB cable and/or other USB port?

PHY6 · Post by **PHY6** » Fri Oct 14, 2016 9:48 pm

gbevin wrote:Can you try with another USB cable and/or other USB port?

Already did that.

gbevin · Post by **gbevin** » Fri Oct 14, 2016 11:14 pm

@PHY6 We'll continue this further through email, thanks for contacting through there.

bbrylow · Post by **bbrylow** » Sat Oct 15, 2016 1:49 am

I have the same "Could not retrieve settings from Linnstrument" using the new firmware and updater. I am currently on 1.2.5.
bbrylow

gbevin · Post by **gbevin** » Sat Oct 15, 2016 7:31 am

bbrylow wrote:I have the same "Could not retrieve settings from Linnstrument" using the new firmware and updater. I am currently on 1.2.5.
bbrylow

Which OS are you on? Can you detail how LinnStrument is connected the computer?

BobDog · Post by **BobDog** » Sat Oct 15, 2016 7:39 am

Just had a bit of strangeness going on so I thought I would reset the globals.

After doing this the Linnstrument disappeared from my Macs midi devices. I used USB Prober to have a look and the linnstrument was in serial mode. After the reset it had left "Update OS" selected.

gbevin · Post by **gbevin** » Sat Oct 15, 2016 7:49 am

BobDog wrote:Just had a bit of strangeness going on so I thought I would reset the globals.

After doing this the Linnstrument disappeared from my Macs midi devices. I used USB Prober to have a look and the linnstrument was in serial mode. After the reset it had left "Update OS" selected.

Thanks for reporting this. In 2.0.0 in can indeed be that a global reset enables OS update instead of activating MIDI output. I'll have a look at fixing that for the next update.

PHY6 · Post by **PHY6** » Sat Oct 15, 2016 11:28 am

gbevin wrote:@PHY6 We'll continue this further through email, thanks for contacting through there.

Cool, lemme know if you want me to try anything. As of now it's still dead.

Roger Linn Design

KVR Audio

LinnStrument Firmware Public Beta : v2.0.0-beta4 (with step sequencer)