Synth Magic? Any good?

Sampler and Sampling discussion (techniques, tips and tricks, etc.)
RELATED
PRODUCTS

Post

I have Phobos II. Like it quite well and use it sporadically. Great for layers with other Kontakt Instruments as well as by itself.
I think I have more interest in their own synths than the emulations; although the one I often ponder is the VS engine. Which is more of a statement of my own reminiscent history than anything and eventually becomes the reason I never pull the trigger on it.
Last edited by BBFG# on Tue Nov 15, 2016 9:16 pm, edited 1 time in total.

Post

Thanks everyone :)
Poly 61's do have a raw sound to them because of the DCO's which do have a raw, 'dirty' sound to them.
I can assure you nothing is muffled and the collection of sounds in Phon 61 are a good all round representation of the raw DCO waveforms and sounds that can be made on a Poly 61.
blortblort wrote: the only downside I can think of is that he puts out these awesome products at a rate high enough that I wish he would just do a subscription service ;) seriously- I would be in.
Thanks :)
Not sure subscriptions work with Kontakt instruments, I'm sure some other Kontakt dev tried it and it did not get enough interest. Plus there would have to be agreed a number of main Kontakt instruments that would be created and made available - I'm assuming it would need 6 main instruments in a year . This year I managed 4 main instruments (J4 with Rob from Tronsonic, PE3000, Exploration I and Phon 61) also had a mini magic out(plus the bonus 8/S and Logan).
Plus there are updates I am chomping at the bit to get out but can't due to synth being broken ie Quadra.

Speaking of Quadra, I just found out the engineer, who has said to me for the past few months that he has been working on my Quadra has, in actual fact not been honest with me (by his own admission)and has not even touched it( I kept having visions of the Monty Python cheese shop sketch 'not much of a synth repair shop really is it' ). Also, he dropped the bombshell that it has now had 9 or 11 sliders snapped off it by people moving his workshop....I'm not best pleased with him I can tell you. I have babied that Quadra for over 10 years and now it has most sliders snapped off it and god knows what the front panel is like because paint can fall off a Quadra just by looking at it. Getting it back off him on Monday although I have been trying to get it off him for months. He deserves a large garden gnome to be inserted into him.

Made some audio demos of some presets of Phon 61.

https://soundcloud.com/synth-magic/phon-80s

https://soundcloud.com/synth-magic/demo7-2

https://soundcloud.com/synth-magic/glasspads

https://soundcloud.com/synth-magic/phon-amber

https://soundcloud.com/synth-magic/demo10-1

https://soundcloud.com/synth-magic/demo6-4

https://soundcloud.com/synth-magic/phon ... eset-demos

https://soundcloud.com/synth-magic/arpegpluck

https://soundcloud.com/synth-magic/some ... set-sounds


https://soundcloud.com/synth-magic/demo9-2

https://soundcloud.com/synth-magic/80a

https://soundcloud.com/synth-magic/demo-0


Video of Phon 61 - Human League track.


Cheers,
Steve
Last edited by synthmagic on Mon Dec 15, 2014 4:08 pm, edited 8 times in total.
Synth Magic synths for Konatkt - ARP Quadra, Polymoog and many more. www.synthmagic.co.uk

Post

Nice demo ... I miss my old Poly61. Had to sell it when I was skint. The only synth I regret parting with.

Post

synthmagic wrote:Thanks everyone :)
Poly 61's do have a raw sound to them because of the DCO's which do have a raw, 'dirty' sound to them.
I can assure you nothing is muffled and the collection of sounds in Phon 61 are a good all round representation of the raw DCO waveforms and sounds that can be made on a Poly 61.
blortblort wrote: the only downside I can think of is that he puts out these awesome products at a rate high enough that I wish he would just do a subscription service ;) seriously- I would be in.
Thanks :)
Not sure subscriptions work with Kontakt instruments, I'm sure some other Kontakt dev tried it and it did not get enough interest. Plus there would have to be agreed a number of main Kontakt instruments that would be created and made available - I'm assuming it would need 6 main instruments in a year . This year I managed 4 main instruments (J4 with Rob from Tronsonic, PE3000, Exploration I and Phon 61) also had a mini magic out(plus the bonus 8/S and Logan).
Plus there are updates I am chomping at the bit to get out but can't due to synth being broken ie Quadra.

Speaking of Quadra, I just found out the engineer, who has said to me for the past few months that he has been working on my Quadra has, in actual fact not been honest with me (by his own admission)and has not even touched it( I kept having visions of the Monty Python cheese shop sketch 'not much of a synth repair shop really is it' ). Also, he dropped the bombshell that it has now had 9 or 11 sliders snapped off it by people moving his workshop....I'm not best pleased with him I can tell you. I have babied that Quadra for over 10 years and now it has most sliders snapped off it and god knows what the front panel is like because paint can fall off a Quadra just by looking at it. Getting it back off him on Monday although I have been trying to get it off him for months. He deserves a large garden gnome to be inserted into him.

Made some audio demos of some presets of Phon 61.
https://soundcloud.com/synth-magic/phon ... eset-demos

Cheers,
Steve
thanks so much steve for the preset demo, well maybe im too used to the new 80s inspired analogue vsts, i didnt mean it offensive ;).

im someone mostly out for the new synthwave stuff and always looking out to get more 80s sounds:



DAW FL Studio Audio Interface Focusrite Scarlett 1st Gen 2i2 CPU Intel i7-7700K 4.20 GHz, RAM 32 GB Dual-Channel DDR4 @2400MHz Corsair Vengeance. MB Asus Prime Z270-K, GPU Gainward 1070 GTX GS 8GB NT Be Quiet DP 550W OS Win10 64Bit

Post

synthmagic wrote:Speaking of Quadra, I just found out the engineer, who has said to me for the past few months that he has been working on my Quadra has, in actual fact not been honest with me (by his own admission)and has not even touched it( I kept having visions of the Monty Python cheese shop sketch 'not much of a synth repair shop really is it' ). Also, he dropped the bombshell that it has now had 9 or 11 sliders snapped off it by people moving his workshop....I'm not best pleased with him I can tell you. I have babied that Quadra for over 10 years and now it has most sliders snapped off it and god knows what the front panel is like because paint can fall off a Quadra just by looking at it. Getting it back off him on Monday although I have been trying to get it off him for months. He deserves a large garden gnome to be inserted into him.
I can imagine the feeling. I'm surprised he still lives...
:(

Post

thecontrolcentre wrote:Nice demo ... I miss my old Poly61. Had to sell it when I was skint. The only synth I regret parting with.
Just sold mine, too - Good synth, but not built too well - and whoever the engineer was who decided to put the battery (that leaks after ten years) on the main cpu board should be birched . :lol: Always check to see if the battery move has been done when buying a Poly 61.
Caine123 wrote:
thanks so much steve for the preset demo, well maybe im too used to the new 80s inspired analogue vsts, i didnt mean it offensive ;).
No offense taken :)
The poly 61 does have a gritty sound to it in a fizzy, dirty electronic kind of way - not sure how to describe it, but it does have a sound all of its own.
beltrom wrote:
synthmagic wrote:Speaking of Quadra, I just found out the engineer, who has said to me for the past few months that he has been working on my Quadra has, in actual fact not been honest with me (by his own admission)and has not even touched it( I kept having visions of the Monty Python cheese shop sketch 'not much of a synth repair shop really is it' ). Also, he dropped the bombshell that it has now had 9 or 11 sliders snapped off it by people moving his workshop....I'm not best pleased with him I can tell you. I have babied that Quadra for over 10 years and now it has most sliders snapped off it and god knows what the front panel is like because paint can fall off a Quadra just by looking at it. Getting it back off him on Monday although I have been trying to get it off him for months. He deserves a large garden gnome to be inserted into him.
I can imagine the feeling. I'm surprised he still lives...
:(
He said he is going to replace the sliders and providing the front panel has not been damaged I will be ok with it, but why he did not move the Quadra to his new workshop himself is beyond me. There is no way I would let a removal company move my synths.
No wonder he has been ducking and diving me for the past few months.
I just have this horrible feeling that is has been absolutely battered.
Last edited by synthmagic on Sun Dec 14, 2014 2:16 pm, edited 2 times in total.
Synth Magic synths for Konatkt - ARP Quadra, Polymoog and many more. www.synthmagic.co.uk

Post

synthmagic wrote:
thecontrolcentre wrote:Nice demo ... I miss my old Poly61. Had to sell it when I was skint. The only synth I regret parting with.
Just sold mine, too - Good synth, but not built too well - and whoever the enginner was who decided to put the battery (that leaks after ten years) on the main cpu board should be birched . :lol: Always check to see if the battery move has been done when buying a Poly 61.
Mine was OK when I had it, but I know it later lost it's preset memory when the battery died. I had warned the guy who bought it that he should get it checked.

Post

synthmagic wrote:He deserves a large garden gnome to be inserted into him.
Gotta love a good Fawlty Towers reference :).

Post

bharris22 wrote:
synthmagic wrote:He deserves a large garden gnome to be inserted into him.
Gotta love a good Fawlty Towers reference :).
:) 'I'm going to see Mr. O'Reilly, dear'.
Synth Magic synths for Konatkt - ARP Quadra, Polymoog and many more. www.synthmagic.co.uk

Post

Synth Magic synths are always excellent. I have them all and will purchase Phon 61 as soon as it's available.

I had a Poly 61 from new and it did have quite a harsh sound. The Oscillators were DCO's to give more stability. The big plus over the Poly 6 though was the extra oscillator per voice so it sounded fatter.

Really looking forward to getting my hands on the Phon 61.

Very sad about the Quadra, Steve. Hope it gets sorted soon.

Post

just ordered Phon 61 in the pre-sale. It's funny as I had a thread up before about how I ignore pre-sales like the plague. but synth magic does one, and i'm all over it. now to make it through until the 21st. :hyper:
macbook pro 2.88 GHz Intel Core Duo, 10 gigs ram, 750GB HD, Logic Studio 9
my blog and some music:
http://rabbitearsmotel.wordpress.com/

Post

More than one year ago I bought a Kontakt 5, now I have a lot of libraries from different manufacturers.
Unfortunately, I don't hear about Synth Magic until this week, when I'm looking for any Oberheim library over an Internet. And voilà - got an OB! It's amazing. Amazingly sounding and perfectly scripted, this library has also a beautiful GUI (one of the best I've ever seen within Kontakt).
So, I can't stop now and bought due pre-order a Polycom. I'm rarely can't wait for software releases, but surely, it would be an awesome thing!

Thanks Steve for an instruments!

Post

Mr Arkadin wrote:Synth Magic are great. Steve is very responsive: he even went back and added some new samples from the ARP Explorer after he'd already finished it just because I wanted the Philip Glass bass sounds.

If anyone thinks it would be fun to distribute freely I will happily slap them on Steve's behalf.
Sorry for my poor english, I'm not exactly sure if you mean that you can distribute them freely, but as a Glass-fan, I'm interested in those sounds. If I misunderstood, then please don't "slap" me! :dog: (as you can see from that emoticon, I'm fairly capable of it myself :lol: )

Post Reply

Return to “Samplers, Sampling & Sample Libraries”