It's done programatically through a facility the AU API has for defining factory presets. Logic then decides what to do with that. Normally you are not able to change these presets which is perhaps why they don't show up in the browser? Some hosts ignore the factory presets completely, which was part of the reason I added preset menus.aMUSEd wrote:That's fine, but I still don't understand why Logic is seeing the factory ones and naming them in the drop down browser but not in the library, they should be the same.
Pulsar 900 Series
-
- KVRist
- 134 posts since 6 Mar, 2016 from SF Bay Area, USA
-
- KVRAF
- 37389 posts since 14 Sep, 2002 from In teh net
I have saved copies of the presets as aupresets with names now so they show properly in the library - don't know if it's OK to post them if anyone wants to use them?
-
- KVRist
- 134 posts since 6 Mar, 2016 from SF Bay Area, USA
Great - absolutely okay to post them.aMUSEd wrote:I have saved copies of the presets as aupresets with names now so they show properly in the library - don't know if it's OK to post them if anyone wants to use them?
BTW, the GUI in the 1.1 update is color corrected. The green tint has been removed and it's brighter and clearer. As I recall you had some concerns about that.
Last edited by pulsarmodular on Fri Mar 10, 2017 11:55 am, edited 1 time in total.
-
- KVRian
- 547 posts since 9 Oct, 2006
Yes please post them here <3
U N I S O N : shoegaze/electronic wall of sound with heavenly voice
https://soundcloud.com/weareunison / https://www.facebook.com/unison666 / https://weareunison.com/
https://soundcloud.com/weareunison / https://www.facebook.com/unison666 / https://weareunison.com/
-
- KVRAF
- 6279 posts since 8 Jul, 2009
#NONFR Check out my music at Bandcamp 
Free Streaming!
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
Free Streaming! Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
-
- KVRAF
- 37389 posts since 14 Sep, 2002 from In teh net
Sorry forgot about this - here:inusable wrote:Yes please post them here <3
https://dl.dropboxusercontent.com/u/564 ... resets.zip
-
- KVRian
- 960 posts since 27 Jun, 2009 from Germany
I recently tried the demo, but the GUI comes out completely garbled.
https://www.dropbox.com/s/t1jz8oyurlf0sy4/P900.png?dl=0
I am on a MacBook Pro with OS X 10.10.5 using Reaper64 (5.35/64).
I did not apply for the 14day trial license (yet) but just clicked the 'DONE' in the authorization window.
The stuff appearing where the knobs should be are segments of the graphics of other programs I had open at that time (in this case Powerpoint), or parts of the screen background. It seems to access some (very) wrong memory there.
Did anybody else have that problem?
Cheers,
Martin
[EDIT] Sorry, the embedded picture does not seem to work. Added a link to the picture on dropbox.
https://www.dropbox.com/s/t1jz8oyurlf0sy4/P900.png?dl=0
I am on a MacBook Pro with OS X 10.10.5 using Reaper64 (5.35/64).
I did not apply for the 14day trial license (yet) but just clicked the 'DONE' in the authorization window.
The stuff appearing where the knobs should be are segments of the graphics of other programs I had open at that time (in this case Powerpoint), or parts of the screen background. It seems to access some (very) wrong memory there.
Did anybody else have that problem?
Cheers,
Martin
[EDIT] Sorry, the embedded picture does not seem to work. Added a link to the picture on dropbox.
-
- KVRist
- 134 posts since 6 Mar, 2016 from SF Bay Area, USA
Hi,
You need to change the "Use Layers" setting in the context menu under "Host Preferences". This is an unfortunate artifact in the graphics API being used, which requires different configurations depending on host and OS version.
You need to change the "Use Layers" setting in the context menu under "Host Preferences". This is an unfortunate artifact in the graphics API being used, which requires different configurations depending on host and OS version.
-
- KVRian
- 960 posts since 27 Jun, 2009 from Germany
pulsarmodular wrote:Hi,
You need to change the "Use Layers" setting in the context menu under "Host Preferences". This is an unfortunate artifact in the graphics API being used, which requires different configurations depending on host and OS version.
Thanks for the info. Where would I find this menu? In reaper, the plugin does not seem to have any other controls, or menus.
Cheers,
Martin
-
- KVRist
- 134 posts since 6 Mar, 2016 from SF Bay Area, USA
On a trackpad, click with two fingers with the (mouse) pointer over the plugin window. Right click with a mouse. If that doesn't work, you may need to enable 'secondary click' in System Preferences.martin_l wrote:pulsarmodular wrote:Hi,
You need to change the "Use Layers" setting in the context menu under "Host Preferences". This is an unfortunate artifact in the graphics API being used, which requires different configurations depending on host and OS version.
Thanks for the info. Where would I find this menu? In reaper, the plugin does not seem to have any other controls, or menus.
Cheers,
Martin
-
- KVRian
- 960 posts since 27 Jun, 2009 from Germany
pulsarmodular wrote:On a trackpad, click with two fingers with the (mouse) pointer over the plugin window. Right click with a mouse. If that doesn't work, you may need to enable 'secondary click' in System Preferences.martin_l wrote:pulsarmodular wrote:Hi,
You need to change the "Use Layers" setting in the context menu under "Host Preferences". This is an unfortunate artifact in the graphics API being used, which requires different configurations depending on host and OS version.
Thanks for the info. Where would I find this menu? In reaper, the plugin does not seem to have any other controls, or menus.
Cheers,
Martin
OK. I found the menu now. Unfortunately, if I enable "Use Layers" the GUI does not show at all anymore. Are the any more compatibility settings I might have to use on my system?
-
- KVRist
- 134 posts since 6 Mar, 2016 from SF Bay Area, USA
There aren't any more settings. Are you running this on Mavericks or Yosemite? There are some GUI issues on those older OS versions but it should run without problems on El Capitan and Sierra.martin_l wrote:pulsarmodular wrote:On a trackpad, click with two fingers with the (mouse) pointer over the plugin window. Right click with a mouse. If that doesn't work, you may need to enable 'secondary click' in System Preferences.martin_l wrote:pulsarmodular wrote:Hi,
You need to change the "Use Layers" setting in the context menu under "Host Preferences". This is an unfortunate artifact in the graphics API being used, which requires different configurations depending on host and OS version.
Thanks for the info. Where would I find this menu? In reaper, the plugin does not seem to have any other controls, or menus.
Cheers,
Martin
OK. I found the menu now. Unfortunately, if I enable "Use Layers" the GUI does not show at all anymore. Are the any more compatibility settings I might have to use on my system?
-
- KVRian
- 529 posts since 22 Sep, 2016
Great idea plexuss! Count me in!
-
- KVRAF
- 6279 posts since 8 Jul, 2009
Just a note that the group buy for P900 @ 35% off (84 € [regular price is 129 €]) has been reached! There is still time if you want to join in the group buy and get the discount.W23 wrote:Great idea plexuss! Count me in!
See the group buy thread: viewtopic.php?f=43&t=481249
#NONFR Check out my music at Bandcamp Free Streaming!
Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
Free Streaming! Free music with your support on Patreon | Youtube: Music of Plexus Videos (music videos) | Youtube: Plexus Productions (audio related) Stop whining. Make music.
