KVR Audio

autodafe · Post by **autodafe** » Mon Sep 25, 2017 12:18 pm

UPDATE: I managed to compile on Linux, the pack now contains the Linux version as well

UDATE 2: I removed the first ZIP with the beta versions, you will find ALL my modules here from now on:
http://www.autodafe.net/virtual-instrum ... dules.html

I have released VCV Rack Modules Pack (PC/MAC/LINUX).

This release contains several additional Modules for the Open Source Modular Synth VCV Rack.

At the moment the available modules are:
LFO module with CV Input
Simple but handy 1x8 and 2x8 Multiples
Clock Divider
8-Steps and 16-Steps Sequencers
8x16 Trigger Sequencer
Fixed Filter Bank
Foldback distortion
Bitcrusher
Phaser

Free, donations are appreciated.

Download it here: http://www.autodafe.net/virtual-instrum ... dules.html

GaryG · Post by **GaryG** » Mon Sep 25, 2017 12:35 pm

Great stuff, thanks a lot.

Are these for a particular version? I didn't have much luck running any third party modules when I tried (very briefly) last week so will reinstall VCV, making sure I have the 'approved' version etc.

Cheers.

autodafe · Post by **autodafe** » Mon Sep 25, 2017 12:41 pm

see description on my webpage:
The newest BETA VERSION 0.8b of my VCV Rack Modules Pack (for PC and MAC only, no Linux yet, sorry). They currently work with Rack 0.3.2 (current release at the moment), not with 0.3.1.

deastman · Post by **deastman** » Mon Sep 25, 2017 2:04 pm

Excellent. I'll give these a spin after work this evening!

autodafe · Post by **autodafe** » Mon Sep 25, 2017 2:29 pm

deastman wrote:Excellent. I'll give these a spin after work this evening!

OK please let me know if they work as expected or not

sprnva · Post by **sprnva** » Mon Sep 25, 2017 2:47 pm

Thanks! I'll try these out once I get stuck into VCV Rack. The good news is that 0.3.2 finally works properly on my Mac (had the missing graphics issue) and from a quick glance also seems to have much lower idle CPU usage.

Fedor_Tkachev · Post by **Fedor_Tkachev** » Mon Sep 25, 2017 5:39 pm

Great work, thanks. Consider making the LFO's SAW output non-inverted, and adding a CV in for Samplerate to Bitcrusher.

autodafe · Post by **autodafe** » Mon Sep 25, 2017 8:29 pm

Linux Version added tonight. Please test it and report, thanks!

GaryG · Post by **GaryG** » Mon Sep 25, 2017 9:26 pm

Only tested on Win10 but all working fine after a clean install of 0.3.2. Thanks a lot, really expands the possibilities.

autodafe · Post by **autodafe** » Mon Sep 25, 2017 9:36 pm

GaryG wrote:Only tested on Win10 but all working fine after a clean install of 0.3.2. Thanks a lot, really expands the possibilities.

thanks a lot.
I am using as well under W10, Mac OS10.12.6 (Sierra) and Linux (Ubuntu), they work quite well, still need to improve something

autodafe · Post by **autodafe** » Mon Sep 25, 2017 9:37 pm

Patch made using an LFO triggering 4 Sequencers for Kick, Hats, Snare and Bass, some Foldback Distortion added on Bass, and other LFOs modulating here and there...

StudioDave · Post by **StudioDave** » Tue Sep 26, 2017 1:12 pm

Greetings,

Is the source code available for these modules ?

I've successfully built the VCV Rack and the modules from Audible Instruments, Befaco, Fundamental, and ESeries, and Vult. Alas, your binaries won't run on my aging Fedora 21, but I'm reasonably certain they'll work if I can build them locally.

At any rate, thanks for supporting Linux !

Best,

dp

HiEnergy · Post by **HiEnergy** » Wed Sep 27, 2017 7:09 am

Those modules work fine and are really useful. Thanks, Autodafe!

autodafe · Post by **autodafe** » Wed Sep 27, 2017 11:52 am

StudioDave wrote:Greetings,

Is the source code available for these modules ?

not at the moment, I didn't have time to check the code, clean it up and pubich them on a repository on github, but I plan to do it ASAP...

autodafe · Post by **autodafe** » Wed Sep 27, 2017 11:58 am

something I have been working on (not released yet)

Autodafe Module Pack for VCV Rack