Is it better to buy an interface or a usb mixer nowadays?
-
- KVRist
- Topic Starter
- 39 posts since 22 May, 2017
Looking for an inexpensive solution, I hate how connectivity is so finicky today..
I was wondering if a USB mixer has all the features of a standalone without the need of drivers or finicky stuff.. would like to use it live and to record
My focusrite pro 40 only works with my Mac nowadays which is lame
I was wondering if a USB mixer has all the features of a standalone without the need of drivers or finicky stuff.. would like to use it live and to record
My focusrite pro 40 only works with my Mac nowadays which is lame
- KVRAF
- 15277 posts since 8 Mar, 2005 from Utrecht, Holland
Me thinks this is the root cause of your problems. Cheap gear comes with crappy drivers that never get any updates.Frank_Jaegr wrote:Looking for an inexpensive solution
We are the KVR collective. Resistance is futile. You will be assimilated.
My MusicCalc is served over https!!
My MusicCalc is served over https!!
-
- KVRist
- Topic Starter
- 39 posts since 22 May, 2017
I wouldn’t saying buying a Saffire Liquid 56 back in the day means I’m cheaping out.. but the reality is that Audio interfaces are almost redundant in certain ways, mostly the ways that make it redundant (ie becoming a paper weight vs a usb mixer which can still function after)
Sucks that my interface only works with my MBP because it handles FireWire connectivity so well.. unlike my 3.0 USB ready PC which crashes because it has 3.0 ports..?
Sucks that my interface only works with my MBP because it handles FireWire connectivity so well.. unlike my 3.0 USB ready PC which crashes because it has 3.0 ports..?
- KVRAF
- 4822 posts since 25 Jan, 2014 from The End of The World as We Knowit
You don't need to choose.
Get both:
a mixing control surface with motorized faders, and
a class-compliant audio interface
Get both:
a mixing control surface with motorized faders, and
a class-compliant audio interface
H E L P
Y O U R
F L O W
Y O U R
F L O W
- KVRAF
- 7748 posts since 13 Jan, 2003 from Darkest Kent, UK
Most 'usb mixers' (especially inexpensive ones) are just an analog mixer with a usb audio interface built in and will still need drivers. If it uses drivers from the manufacturer then it could still be redundant someday if they drop support. However, if it's a relatively modern device then it may be class compliant so doesn't need proprietary drivers that you need to install. More and more are CC so they can be used with ipads etc (don't want to miss out on that growing market).Frank_Jaegr wrote:I was wondering if a USB mixer has all the features of a standalone without the need of drivers or finicky stuff..
-
- KVRAF
- 1929 posts since 4 Nov, 2004 from Manchester
Latency and performance on the class compliant stuff is normally pretty lousy though, this from experience is applicable to the solutions used in USB mixers too.
So is the Saffire 40 100% known not to work under Windows 10 / on modern hardware, or it just isn't working on the setup you have there? What Firewire card do you have in there that it isn't working on?
So is the Saffire 40 100% known not to work under Windows 10 / on modern hardware, or it just isn't working on the setup you have there? What Firewire card do you have in there that it isn't working on?
- KVRAF
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
A USB mixer is not a bad way to break IMO. Mackie gear is good->
http://mackie.com/products/profxv2-series
The hangup I mentioned in the other thread of urs is that they don't have a 5-pin MIDI port
http://mackie.com/products/profxv2-series
The hangup I mentioned in the other thread of urs is that they don't have a 5-pin MIDI port
-
- KVRAF
- 2070 posts since 5 Oct, 2005
There is a known problem with via chipsets.Kaine wrote:
So is the Saffire 40 100% known not to work under Windows 10 / on modern hardware, or it just isn't working on the setup you have there? What Firewire card do you have in there that it isn't working on?
https://support.focusrite.com/hc/en-gb/ ... 10-upgrade
-
- KVRAF
- 2383 posts since 16 Jan, 2013
-
- KVRian
- 716 posts since 23 Dec, 2011
I use a Yamaha MG10XU, which has this 'limitation'. Here's the bottom line (for me) though. I don't often want to pull multiple simultaneous audio inputs into my DAW. It's not that I wouldn't welcome the capability.. but it's rare, that I want to record audio on multiple channels live. Typically... it just doesn't come up that often.sprnva wrote:One thing to check with USB mixers is how many channels they output over USB. Some only send a stereo mix back to your DAW rather than seperate outputs like your audio interface.
That said - the Yami MG10XU has been a great mixer/interface for my keyboard setup. I use it to mix hardware synths and vocals to Logic Pro, and it's been great.
-
- KVRist
- Topic Starter
- 39 posts since 22 May, 2017
Right now I'm using a Syba Texas Instrument PCi card.. actually, I used Focusrites online checker and it's confirmed working on their own OS checker and Chipset checker utility. The problem on Windows 10 seems that my interface doesn't wanna stay locked and simply clicks and pops while the Mixcontrol says it is simply disconnected.
I was thinking of just buying an MPC live for it's built in audio interface and for the ability to mess with a built in sampler and sequencer.. just not sure if that's a smart move. I'm actually going to downgrade from Windows 10 down to 7. At the moment I just don't have enough money to make the switch to another interface so hopefully Windows 7 is a stable environment for my interface until I can save up enough for that or another interface (probably)
Most midi gear is moving to USB so I'm not worries about the missing MIDI ports
I was thinking of just buying an MPC live for it's built in audio interface and for the ability to mess with a built in sampler and sequencer.. just not sure if that's a smart move. I'm actually going to downgrade from Windows 10 down to 7. At the moment I just don't have enough money to make the switch to another interface so hopefully Windows 7 is a stable environment for my interface until I can save up enough for that or another interface (probably)
Most midi gear is moving to USB so I'm not worries about the missing MIDI ports
-
- KVRist
- 423 posts since 8 Mar, 2008 from Berlin
Correcct me if I‘m wrong, but as far as i know, there aren‘t too many (if any) usb mixers with low latency Performance.
my music:
soundcloud.com/septimon-band
blend.io/septimon
soundcloud.com/septimon-band
blend.io/septimon
- Boss Lovin' DR
- 12628 posts since 15 Mar, 2002 from the grimness of yorkshire
Another thing top watch out for is if the mixer outputs phantom power for mics (if required) properly - i.e to the usual 48v level. One forum member recently bought one of the Behringer Xenyx little ones only to discover it only output 15 volts...
-
- KVRAF
- 1929 posts since 4 Nov, 2004 from Manchester
Yeah, I was thinking it was probably the XIO 2200B chip, but same logic applies.Acid Mitch wrote: There is a known problem with via chipsets.
https://support.focusrite.com/hc/en-gb/ ... 10-upgrade
Syba doesn't mean anything to me I'm afraid, I was fishing for the controller chipset used upon it. As has already been noted, a number of solutions that used to work, no longer do on current hardware/OS combinations. If your on a PCI card, then I'm not going to be overly surprised if the chipset is long since legacy and support may have been killed in an update.Frank_Jaegr wrote:Right now I'm using a Syba Texas Instrument PCi card..
The description you're giving us about the card and interface failing to sync, is exactly the symtom I would expect in this situation.
-
Winstontaneous Winstontaneous https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=98336
- KVRAF
- 2351 posts since 15 Feb, 2006 from Berkeley, CA
Good point, also some class-compliant (driverless) USB mixers only work at lower sample rates/bit depths. 44.1 is OK for me, but 24+ bit is essential for serious audio work.sprnva wrote:One thing to check with USB mixers is how many channels they output over USB. Some only send a stereo mix back to your DAW rather than seperate outputs like your audio interface.