Login / Register 0 items | $0.00 New @ KVR
doctorbob
KVRian
 
1125 posts since 7 Mar, 2014

Postby doctorbob; Tue Sep 11, 2018 11:49 am Re: One Synth Challenge #115: Seismic by Syntonica

In case REAPER users missed this https://mrelwood5.wixsite.com/plugins these plugins are free/donationware, and are JSFX only. They are very impressive. The dynamic EQ has oodles of functionality and the SKY processor (limit/comp/EQ tilt/rms basher) is amazing.

Not sure they can be used in the context of OSC?? - but I guess you could have scripted them yourself, and then that would be legal ;-)

dB
User avatar
Medniex
KVRist
 
57 posts since 16 Apr, 2017, from Rīga

Postby Medniex; Wed Sep 12, 2018 3:33 am Re: One Synth Challenge #115: Seismic by Syntonica

https://soundcloud.com/medniex/osc-115-rev00

Just a quick composition with presets. Nothing serious yet. I had a little bit time this morning. :hyper:
KO :ud:
Carl_saved
KVRist
 
100 posts since 17 May, 2013

Postby Carl_saved; Thu Sep 13, 2018 6:30 am Re: One Synth Challenge #115: Seismic by Syntonica

My Submission - best served loud:

https://soundcloud.com/carl_saved/sheep ... s-clothing

Do you know such a Sheep in Wolf's Clothing? Scared of it and you don't know it's harmless and even useful? Well, I need to admit I don't trust all my sheep yet myself.

Seismic 1.3.0 x 29 in Live 10

DAW Audio FX:
EQ Eight x 23 (on nearly every sound and on master)
Compressor x 11 (7 for sidechaining, 2 for dynamic range reduction, 1 as transient shaper, 1 on master)
Utility x 7 (mainly stereo width control)
Reverb x 5 (3 sends, 2 single sounds, modulation disabled)
Ping Pong Delay x 5 (all single sounds)
Filter Delay x 2 (all single sounds)
Limiter x 1 (on Master)
Saturator x 1 (as limiter to the snare. Doesn't add much to the sound)


Thanks to syntonica for his work on Seismic. I enjoyed working with it a lot (sorry to hear that its flaws might keep some folks from working with it). It is a unique and inspiring, handcrafted instrument with limitations that are compensated by a whole lot of unusual new possibilities. Great job! :tu:
nujazzbes
KVRer
 
4 posts since 2 Sep, 2018

Postby nujazzbes; Thu Sep 13, 2018 2:10 pm Re: One Synth Challenge #115: Seismic by Syntonica

Hi ! For me the site is down ! I just would like to know how many time we have for make this ?
User avatar
syntonica
KVRist
 
424 posts since 24 Sep, 2014, from Specific Northwest

Postby syntonica; Thu Sep 13, 2018 2:34 pm Re: One Synth Challenge #115: Seismic by Syntonica

nujazzbes wrote:Hi ! For me the site is down ! I just would like to know how many time we have for make this ?

My website is currently responding. Please try again.

If you still cannot reach it, let me know what error message you get and which country you are in. Thanks!
L-EctroBit
KVRist
 
50 posts since 30 Sep, 2015

Postby L-EctroBit; Thu Sep 13, 2018 3:12 pm Re: One Synth Challenge #115: Seismic by Syntonica

Hi Syntonica. Maybe I'm wrong, but I think that nujazzbes was referring to the google site's link, where is the info about the month's OSC and rules. This link is asking now for email and password to enter. This is new. I don't know if this is permanent or a momentary error.

nujazzbes, you have the rest of September (before the 1st of October) to submit a track. About Seismic in this link you have info about the synth and the link to Syntonica's web:

https://www.kvraudio.com/product/seismi ... ca/details

I hope that it was helpful for you. :tu:

Edit: about the rules bjporter will have to publish them in a more accessible link in case this change in google site's link is permanent.

Edit 2: Seems the access to OSC's web is back to normal. 8)
Last edited by L-EctroBit on Thu Sep 13, 2018 10:19 pm, edited 2 times in total.
User avatar
syntonica
KVRist
 
424 posts since 24 Sep, 2014, from Specific Northwest

Postby syntonica; Thu Sep 13, 2018 3:21 pm Re: One Synth Challenge #115: Seismic by Syntonica

Oh. No worries then. :tu:
Leonard Bowman
KVRer
 
8 posts since 4 Jul, 2018

Postby Leonard Bowman; Fri Sep 14, 2018 8:19 am Re: One Synth Challenge #115: Seismic by Syntonica

I've had so many ideas on where I wanted to take this; they ranged from mixed-meter jazz to seven-four drum 'n' bass to varying styles of microtonality.
When I actually had time to work, though, was when things shut down for Hurricane Florence. Because of that, I wanted to make something calm in response to the nervous uncertainty around the storm.

I present: Shelter.
https://soundcloud.com/anotherbenjamin/shelter

Composed/Produced in Reaper 5.95
11 instances of Seismic;
7 instances of ReaEQ;
1 instance of OrilRiver, mostly for my flute/loon in training.
(I also used MLoudnessAnalyzer... to analyze loudness.)

I welcome any and all advice or criticism, especially when it comes to mixing.
Just don't ask me to autotune my loon.
nujazzbes
KVRer
 
4 posts since 2 Sep, 2018

Postby nujazzbes; Fri Sep 14, 2018 11:26 am Re: One Synth Challenge #115: Seismic by Syntonica

@Syntonica yeah i was talking about the google link.
Your synth is so good the problem is just that i can't save my presets because i can't right everything, all my key input respond to ableton and not to seismic, not a big problem because they are save when i close and reopen my DAW. I'm on ableton 10 and windows 10.

Thanks !!
nujazzbes
KVRer
 
4 posts since 2 Sep, 2018

Postby nujazzbes; Fri Sep 14, 2018 11:26 am Re: One Synth Challenge #115: Seismic by Syntonica

@Syntonica yeah i was talking about the google link.
Your synth is so good the problem is just that i can't save my presets because i can't right everything, all my key input respond to ableton and not to seismic, not a big problem because they are save when i close and reopen my DAW. I'm on ableton 10 and windows 10.

Thanks !!
User avatar
syntonica
KVRist
 
424 posts since 24 Sep, 2014, from Specific Northwest

Postby syntonica; Fri Sep 14, 2018 3:07 pm Re: One Synth Challenge #115: Seismic by Syntonica

Hi all Windows users,

Version 1.3.2 uploaded! Resizing should draw properly now. Helps if I don't duplicate my code redundantly in two places.

I abused Seismic with multiple plugins in Reaper, Live and MuLab. I was unable to get any crashing when moving huge bunches of notes about while they were playing. Reaper did like to engage auto-mute on sounds with tails as the loudness builds up.

Please rename your old dll and give this a whirl. Again, let me know what sort of VST abuse you were committing if it crashes! If you've reported before, please report in again if your problem persists.

Regarding Live, its just being mean. It does not send any keystrokes whatsoever, regardless if I use the VST hooks, the Windows hooks or even properly ask for them through Windows. Older versions apparently had an options.txt file that you could edit to get them, but later versions of live no longer seem to have this file. In going to have to dive in deeper as I fear I may have to create a new tiny little window just to get keystrokes. This makes the dev cry... :(

(The Mac version has not been updated. Unless you have any issues, keep calm and groove on.)
User avatar
] Peter:H [
KVRian
 
572 posts since 22 Sep, 2016

Postby ] Peter:H [; Sat Sep 15, 2018 3:18 am Re: One Synth Challenge #115: Seismic by Syntonica

syntonica wrote:
Regarding Live, its just being mean. It does not send any keystrokes whatsoever, regardless if I use the VST hooks, the Windows hooks or even properly ask for them through Windows. Older versions apparently had an options.txt file that you could edit to get them, but later versions of live no longer seem to have this file. In going to have to dive in deeper as I fear I may have to create a new tiny little window just to get keystrokes. This makes the dev cry... :(

Ahm, the latest version now resizes again well, but I cannot type in anything. DAW Bitwig 2.4, Win 10x64. No way to type in parameters nor patch names :help:
User avatar
syntonica
KVRist
 
424 posts since 24 Sep, 2014, from Specific Northwest

Postby syntonica; Sat Sep 15, 2018 6:49 am Re: One Synth Challenge #115: Seismic by Syntonica

Thanks. I'll take a look at Bitwig and see if it's the same issue as Live.
User avatar
] Peter:H [
KVRian
 
572 posts since 22 Sep, 2016

Postby ] Peter:H [; Sat Sep 15, 2018 7:04 am Re: One Synth Challenge #115: Seismic by Syntonica

syntonica wrote:Thanks. I'll take a look at Bitwig and see if it's the same issue as Live.

I forgot to mention about the typing problem, that the Seismic version before the current one worked like a charm. I was able to type in values and patch names. Only today, after I've upgraded to the latest version of Seismic it stopped working. Not too bad, as my track is almost finished and I can revert to the previous version...

By the way: Cool Synth. If you ask me for only one small thing to improve Seismic in a future version, it would be a more "standard" approach to envelopes ;-). Fun envelopse like for instance the loopable multi-stage onse in thorn are really nice ;-)

Best Regards
Peter:H
doctorbob
KVRian
 
1125 posts since 7 Mar, 2014

Postby doctorbob; Sat Sep 15, 2018 9:18 am Re: One Synth Challenge #115: Seismic by Syntonica

] Peter:H [ wrote:By the way: Cool Synth. If you ask me for only one small thing to improve Seismic in a future version, it would be a more "standard" approach to envelopes ;-). Fun envelopes like for instance the loopable multi-stage ones in thorn are really nice ;-)
I agree, such a fun beast. Some unexpected sounds come out of it - and I found that once you get a nice sound, you can nearly always improve it by fiddling around with the various waveforms - basically playing with the harmonic structure of the final result. :borg:

It does seem that MSEGs are the current way to go with envelopes - or at least making them an option.

Many thanks for letting us play with it. :tu:

dB
PreviousNext

Moderator: KVR Moderators (Main)

Return to Instruments