Xils 4 The Pin Matrix Modular Analog Synthesizer [V1.5 released + Intro Price offer]

VST, AU, AAX, CLAP, etc. Plugin Virtual Instruments Discussion
Post Reply New Topic
RELATED
PRODUCTS
XILS 4

Post

I updated Xils 3 -> Xils 4.

I received two licenses for ilok - Xils 3 and Xils 4.

But the old Xils 3 is now unavailable. I thought there would be two licenses of Xils 3. Is it should be? Only one license is available for ilok?

Post

From Xils site :

Important note : The XILS 4 license can run the XILS 3


So I suppose you just have to DL the installer and then run the Xils 3 with the Xils 4 licence.
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post

Also : Old installers for Xils 3 v1.5 etc are there :

https://www.xils-lab.com/products/xils-3-p-126.html#

Click on 'Previous versions of Xils 3', it opens a window. Scroll to the bottom of the page.
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post

Lotuzia wrote: Sat Dec 01, 2018 12:26 pm From Xils site :

Important note : The XILS 4 license can run the XILS 3


So I suppose you just have to DL the installer and then run the Xils 3 with the Xils 4 licence.
I checked Xils 3 without a license Xils 3 does not work. Apparently, the upgrade does not allow you to have two Xils 3 licenses in iLok.

So, in order to work on a computer without a physical key, you need to constantly activate and deactivate licenses.

But the Xils website says:

For the iLok protection, up to two independent locations are allowed per license (Computer or iLok devices)

My Poly KB II also has one license. Unclear.
You do not have the required permissions to view the files attached to this post.

Post

future-bit wrote: Sat Dec 01, 2018 3:06 pm
Lotuzia wrote: Sat Dec 01, 2018 12:26 pm From Xils site :

Important note : The XILS 4 license can run the XILS 3


So I suppose you just have to DL the installer and then run the Xils 3 with the Xils 4 licence.
I checked Xils 3 without a license Xils 3 does not work. Apparently, the upgrade does not allow you to have two Xils 3 licenses in iLok.

So, in order to work on a computer without a physical key, you need to constantly activate and deactivate licenses.

But the Xils website says:

For the iLok protection, up to two independent locations are allowed per license (Computer or iLok devices)

My Poly KB II also has one license. Unclear.
You should maybe contact xils directly for this problem. I'm confident they will sort this out :

https://www.xils-lab.com/support
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post

Lotuzia wrote: Sat Dec 01, 2018 3:34 pm You should maybe contact xils directly for this problem. I'm confident they will sort this out :
Thank you, the support is excellent. Responded quickly. It turns out I have an old license. I bought in 2009, and at that time 2 activations were not provided. They replaced the license, now there are 2 activations.

I like the new effects in Xils 4. Excellent reverb and routing.

Post

Lotuzia wrote: Sat Dec 01, 2018 11:24 am More sounds from the XILS 4 v1.5

FutureAnalog 2

One preset at a time. Sometimes in two versions (w/without drums)
Some more :wink:

FutureAnalog 3
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post

And ... more
FutureAnalog 4
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post

Last update introduced a new switch on each oscillator, for full-range frequency selection, and some epic sweeps :love:
Super nice to have. :harp:

Post

Niowiad wrote: Wed Dec 05, 2018 11:20 pm Last update introduced a new switch on each oscillator, for full-range frequency selection, and some epic sweeps :love:
Super nice to have. :harp:
Continuous frequency sweep from 1 hz to 16khz. I remember this had been requested before. Definitely nice to have. Especially because each of the 12 regular oscillators can also modulate anything, and behave like an LFO @audio rate.
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post

Hi like the new browser in 1.5 but i cannot find midi assignments for the stick in the parameters list seems to be missing

Post

Not sure this will help, but I've personally always used the DAWs system for midi learn, and the stick parameters (position and range) are available from a very long list of parameters for midi learn and automation.
They're labelled "StickVrt" and "StickHrz". Same name for the Left and Right synth. The ones for the Right synth are situated much further in the list.

They seem to be missing from XILS4's internal "Midi Controlers Assignation", along with several other parameters as far as I can see. Not really an issue for me as I always use the in-DAW method in REAPER, but I don't know if this can be a problem on other DAWs.

Post

Few more clips (some presets in isolation again)

FutureAnlog 5
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post

Some Minitracks (Not produced, raw sounds straight from the Xils 4 v1.5) + StiX on drums

Rêves (extract)
Golden Years
The Avengers Theme
Nantes
Vesperale
http://www.lelotusbleu.fr Synth Presets

77 Exclusive Soundbanks for 23 synths, 8 Sound Designers, Hours of audio Demos. The Sound you miss might be there

Post Reply

Return to “Instruments”