One Synth Challenge #124: MSoundFactory by MeldaProduction (Schiing Wins!)
- KVRer
- 6 posts since 4 Dec, 2018
Hi there!
I'm new at this forum and it's the first time I'm participating for the KVR One Synth Challenge! I've really had a lot of fun creating this song and playing with MSoundFactory! Now, here is the result:
https://soundcloud.com/tuscamusicas/tus ... production
I've created this song using only sounds from MSoundFactory plugin by MeldaProduction. The song was created, arranged, mixed and mastered in Presonus Studio One 4 with native effects such as Channel Strip for EQ, Mixverb for reverb and RedlightDist for a little bit drive distortion.
I've used 13 instances of MSoundFactory with the following presets (notice that I've used these presets almost without touching the original values):
Delayed
Kick Factory
Perking Up
Basic Flute
Flapper
DX Pluck
Epic Brass FX 1
Epic Brass FX 2
Church pipe organ 3
Spoocky Kick
Club HiHat
Dry HiHats
I want to thank you so much to MeldaProduction, Presonus and KVR for this challenge!!!
Cheers!
#kvr #kvrosc #onesynthchallenge #meldaproduction #msoundfactory #presonus #studioone #studioone4 #vst #vstplugins
I'm new at this forum and it's the first time I'm participating for the KVR One Synth Challenge! I've really had a lot of fun creating this song and playing with MSoundFactory! Now, here is the result:
https://soundcloud.com/tuscamusicas/tus ... production
I've created this song using only sounds from MSoundFactory plugin by MeldaProduction. The song was created, arranged, mixed and mastered in Presonus Studio One 4 with native effects such as Channel Strip for EQ, Mixverb for reverb and RedlightDist for a little bit drive distortion.
I've used 13 instances of MSoundFactory with the following presets (notice that I've used these presets almost without touching the original values):
Delayed
Kick Factory
Perking Up
Basic Flute
Flapper
DX Pluck
Epic Brass FX 1
Epic Brass FX 2
Church pipe organ 3
Spoocky Kick
Club HiHat
Dry HiHats
I want to thank you so much to MeldaProduction, Presonus and KVR for this challenge!!!
Cheers!
#kvr #kvrosc #onesynthchallenge #meldaproduction #msoundfactory #presonus #studioone #studioone4 #vst #vstplugins
Last edited by tusca on Mon Jul 01, 2019 2:03 pm, edited 1 time in total.
-
- KVRist
- 64 posts since 9 Jun, 2018
To be honest, I felt like I ended up not sufficiently exploring the possibilities with this synth. There's so much going on, and so many possibilities that I found myself ignoring huge amounts of capacity to focus on the kind of bread-and-butter more-with-less sound design that happens all the time in OSC. Also trying to find the sweet spot where integrating the useful feedback and advice from past months meets relaxed creativity.
As usual, I'm in it for the feedback and advice, and hoping this represents another step forward.
https://soundcloud.com/h_s_j_e/hsje-osc ... -the-gulch
Daw: Reaper (5.979)
MSoundFactory x 23
Other plugins:
Dragonfly Hall x 11
Dragonfly Room x 1
ReaComp x 5
ReaEQ x 22
MEqualizer x 2 (1 on master)
MStereoExpander x 1
MCompressor x 2
BlueArp x 2
Limiter No. 6 x 4 (1 on master)
Transpire x 4
SPAN x 1 (master)
YouLean Loudness Meter (master)
As usual, I'm in it for the feedback and advice, and hoping this represents another step forward.
https://soundcloud.com/h_s_j_e/hsje-osc ... -the-gulch
Daw: Reaper (5.979)
MSoundFactory x 23
Other plugins:
Dragonfly Hall x 11
Dragonfly Room x 1
ReaComp x 5
ReaEQ x 22
MEqualizer x 2 (1 on master)
MStereoExpander x 1
MCompressor x 2
BlueArp x 2
Limiter No. 6 x 4 (1 on master)
Transpire x 4
SPAN x 1 (master)
YouLean Loudness Meter (master)
- KVRist
- 396 posts since 7 Dec, 2006 from Richmond, VA, USA
Entry
https://soundcloud.com/hennessey/bh9090-4-7-8
32 instances in Live 10 with Delays, EQ8, Reverb, Compressors, Limiter, Overdrive, Saturation
3rd Party:
TAL Reverb 4.
Dragonfly Reverb
https://soundcloud.com/hennessey/bh9090-4-7-8
32 instances in Live 10 with Delays, EQ8, Reverb, Compressors, Limiter, Overdrive, Saturation
3rd Party:
TAL Reverb 4.
Dragonfly Reverb
-
- KVRer
- 23 posts since 11 Feb, 2017
Here is my entry! A bit different than what I usually make. A bit short, a bit simple. Made sounds from scratch this time. Had fun with the resonator module and the noises.
https://soundcloud.com/petereke/peterek ... om-osc-124
DAW: Reaper
4x MSoundFactory
1x ReaEq
2x ReaComp
1x ReaXcomp
https://soundcloud.com/petereke/peterek ... om-osc-124
DAW: Reaper
4x MSoundFactory
1x ReaEq
2x ReaComp
1x ReaXcomp
-
- KVRian
- 639 posts since 20 Jan, 2013
My MSF entry
https://soundcloud.com/zarf/zarf-transit-ion
Pretty crazy sound design environment! Confusing and complex but rewarding. I feel I barely scratched the surface of what this can do. Most sounds from scratch and some tweaked presets too.
26 Instances of MSF in Ableton
DAW FX:
30+ eq8
15+ compressors
2 Multiband compressor
4 Delay
2 Reverb
Bunch of Utilities for volume automation and monoising.
some midi fx (pitch, arp)
3rd Party FX:
Airwindows fromTape
TDR Nove
3 OTT
LoundMax
Good luck all
https://soundcloud.com/zarf/zarf-transit-ion
Pretty crazy sound design environment! Confusing and complex but rewarding. I feel I barely scratched the surface of what this can do. Most sounds from scratch and some tweaked presets too.
26 Instances of MSF in Ableton
DAW FX:
30+ eq8
15+ compressors
2 Multiband compressor
4 Delay
2 Reverb
Bunch of Utilities for volume automation and monoising.
some midi fx (pitch, arp)
3rd Party FX:
Airwindows fromTape
TDR Nove
3 OTT
LoundMax
Good luck all
- KVRian
- 951 posts since 30 Oct, 2013 from Scarborough
Here's my entry:
https://soundcloud.com/richard-semper/voices-osc124
No of instances of MSoundFactory - 15 total (All designed from scratch)
DAW - MuLab
Channel Fx - None
Master - 1xHP filter, 1xLP filter and 1x Limiter
Analyser: Voxengo SPAN
DR= 11
It's still a WIP really. Spent most of the month exploring the synth and designing sounds, then pretty much threw this arrangement together today after work. Mixed on headphones (too late, don't want to wake the neighbours after all!) I will see how it sounds on main speakers tomorrow afternoon.
I feel like a month is just enough to scratch the surface with this synth. Once you get to know it a bit it is quite a lot of fun and can be inspiring. (The randomisation features are a great source of inspiration and way to explore the synth!)
https://soundcloud.com/richard-semper/voices-osc124
No of instances of MSoundFactory - 15 total (All designed from scratch)
DAW - MuLab
Channel Fx - None
Master - 1xHP filter, 1xLP filter and 1x Limiter
Analyser: Voxengo SPAN
DR= 11
It's still a WIP really. Spent most of the month exploring the synth and designing sounds, then pretty much threw this arrangement together today after work. Mixed on headphones (too late, don't want to wake the neighbours after all!) I will see how it sounds on main speakers tomorrow afternoon.
I feel like a month is just enough to scratch the surface with this synth. Once you get to know it a bit it is quite a lot of fun and can be inspiring. (The randomisation features are a great source of inspiration and way to explore the synth!)
https://rjsemper.wixsite.com/website
One Synth Challenge - https://sites.google.com/site/kvrosc/about
One Synth Challenge - https://sites.google.com/site/kvrosc/about
-
- KVRian
- 860 posts since 13 Jan, 2013 from United States
Here's my entry this month. I like the synth more now than I did at the start. Enjoy.....
https://soundcloud.com/ontrackp/osc124- ... he-widgets
31 instances in Logic Pro X
Logic compressors, EQ, reverb
Nova on mix
OTT on drum bus
used one preset from MSF, everything else fresh programs
https://soundcloud.com/ontrackp/osc124- ... he-widgets
31 instances in Logic Pro X
Logic compressors, EQ, reverb
Nova on mix
OTT on drum bus
used one preset from MSF, everything else fresh programs
- KVRist
- 429 posts since 4 Jun, 2018 from The UK
So I managed to make this! I had a lot of fun learning and making sounds with MSF! I should really try and finish earlier so I have time to properly check my mix and master. The track got a bit crazy, but I ran with it
Even though MSF is in Beta it's very usable and stable, the CPU usage is decent. I was getting an error on exporting, but luckily the track works!
https://soundcloud.com/ranoka/ultronic-techronicity
Made for the KVR One Synth Challenge #124 MSoundFactory by Melda Production
All the sounds were created using MSoundFactory - no samples used.
FL Studio 20.1.2 64bit - Windows 10
30 instances of MSoundFactory - all sounds made from init (maybe some cheeky randomisation here and there).
- FL Native:
Fruity Balance x8 (for volume automation)
Fruity Reverb 2 x4
Fruity Delay 3 x3
Fruity EQ 2 x2
Fruity Limiter
Maximus (on the master)
-3rd party
W1 Limiter
- Visualisers:
SPAN
Youlean Loudness Meter 2
Wave Candy
MOscilloscope
MAnalyser
Even though MSF is in Beta it's very usable and stable, the CPU usage is decent. I was getting an error on exporting, but luckily the track works!
https://soundcloud.com/ranoka/ultronic-techronicity
Made for the KVR One Synth Challenge #124 MSoundFactory by Melda Production
All the sounds were created using MSoundFactory - no samples used.
FL Studio 20.1.2 64bit - Windows 10
30 instances of MSoundFactory - all sounds made from init (maybe some cheeky randomisation here and there).
- FL Native:
Fruity Balance x8 (for volume automation)
Fruity Reverb 2 x4
Fruity Delay 3 x3
Fruity EQ 2 x2
Fruity Limiter
Maximus (on the master)
-3rd party
W1 Limiter
- Visualisers:
SPAN
Youlean Loudness Meter 2
Wave Candy
MOscilloscope
MAnalyser
- KVRist
- 186 posts since 28 Dec, 2012
https://soundcloud.com/jazzaria/hat-parade
Reaper
19 instances of MSoundFactory
1x JS Volume Adjustment
1x ReaComp
1x MEqualizer
2x AUPeakLimiter
3x JS Midi Velocity and Timing Humanizer
3x ReaVerbate
1x ReaVerb
1x ReaEQ
Lots of hats. (No, not hi-hats - though, a few of those.)
Reaper
19 instances of MSoundFactory
1x JS Volume Adjustment
1x ReaComp
1x MEqualizer
2x AUPeakLimiter
3x JS Midi Velocity and Timing Humanizer
3x ReaVerbate
1x ReaVerb
1x ReaEQ
Lots of hats. (No, not hi-hats - though, a few of those.)
- KVRist
- 72 posts since 29 Apr, 2019 from Zagreb, Croatia
Here is my entry for this month.
https://soundcloud.com/user-806749657/m ... substate-2
Last time I got suggestions not to put too long tracks so I made this one a bit shorter
I made it in Reaper and used 50 instances of MSoundFactory.
Native:
JS RBJ Highpass/Lowpass Filter 1x
JS Simple Peak-1 Limiter 2x
JS Chebyshev 4-Pole Filter 3x
JS Distortion(Fuzz) 1x
ReaControlMIDI 24x
ReaEQ 12x
ReaComp 5x
ReaDelay 2x
ReaXcomp 2x
Third party:
A1TriggerGate 8x
OrilRiver 8x
OTT 2x
MSED 3x
Limited-Z_v2 1x
https://soundcloud.com/user-806749657/m ... substate-2
Last time I got suggestions not to put too long tracks so I made this one a bit shorter
I made it in Reaper and used 50 instances of MSoundFactory.
Native:
JS RBJ Highpass/Lowpass Filter 1x
JS Simple Peak-1 Limiter 2x
JS Chebyshev 4-Pole Filter 3x
JS Distortion(Fuzz) 1x
ReaControlMIDI 24x
ReaEQ 12x
ReaComp 5x
ReaDelay 2x
ReaXcomp 2x
Third party:
A1TriggerGate 8x
OrilRiver 8x
OTT 2x
MSED 3x
Limited-Z_v2 1x
-
Leonard Bowman Leonard Bowman https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=422028
- KVRist
- 193 posts since 4 Jul, 2018 from the nest
I think I picked a good synth for the only one I've purchased so far.
Presenting "Barriers Will Not Break Us"
https://soundcloud.com/anotherbenjamin/ ... t-break-us
made in REAPER 5.979
with 20 instances of MSoundFactory
11 ReaEQ
5 ReaDelay
2 MIDI note filters
1 Cocoa delay
1 OrilRiver
+ mastering:
Airwindows curve
slickEQ
Master Tom Compressor
Limiter No6
MLoudnessAnalyzer
Feel free to ask me questions, or let me know if I'm missing vital info.
Presenting "Barriers Will Not Break Us"
https://soundcloud.com/anotherbenjamin/ ... t-break-us
made in REAPER 5.979
with 20 instances of MSoundFactory
11 ReaEQ
5 ReaDelay
2 MIDI note filters
1 Cocoa delay
1 OrilRiver
+ mastering:
Airwindows curve
slickEQ
Master Tom Compressor
Limiter No6
MLoudnessAnalyzer
Feel free to ask me questions, or let me know if I'm missing vital info.
mostly here for the One Synth Challenge
you can hear some of my newest music at: https://wrenharmonic.bandcamp.com/ or https://www.youtube.com/@wrenharmonic
you can hear some of my newest music at: https://wrenharmonic.bandcamp.com/ or https://www.youtube.com/@wrenharmonic
- KVRist
- 217 posts since 15 May, 2016 from Vienna
- KVRian
- 506 posts since 10 Nov, 2018
- KVRian
- 506 posts since 10 Nov, 2018
Hi David, just for clarification, by chopping do you mean chopping the audio render or MIDI data?David wrote: ↑Wed Jun 26, 2019 4:24 am OK, PeterH, you suggested I do this, so here I am:
https://soundcloud.com/david-coffin/pip ... -passes-by
I recorded myself noodling around in MSF using patches entirely of my own devising (though the piper's pipe was derived from a sweet MSF factory patch), used no samples (the drum sounds are from the drum synth out of MDrummer), nor any FX not included in MSF, then layered four of the recordings, with some chopping, fading, and a very little region looping.
Was inspired by a well-known painting by Paul Klee called Twittering Machine.
-
- KVRAF
- 2000 posts since 5 Jan, 2003 from Brookings, OR
The audio… Is that a problem? I created the whole thing by recording audio in realtime, then assembling/layering these files in Logic, sometimes deleting, sometimes looping. Nothing was created outside of MSF.exponent1 wrote: ↑Mon Jul 01, 2019 6:55 pmHi David, just for clarification, by chopping do you mean chopping the audio render or MIDI data?David wrote: ↑Wed Jun 26, 2019 4:24 am OK, PeterH, you suggested I do this, so here I am:
https://soundcloud.com/david-coffin/pip ... -passes-by
I recorded myself noodling around in MSF using patches entirely of my own devising (though the piper's pipe was derived from a sweet MSF factory patch), used no samples (the drum sounds are from the drum synth out of MDrummer), nor any FX not included in MSF, then layered four of the recordings, with some chopping, fading, and a very little region looping.
Was inspired by a well-known painting by Paul Klee called Twittering Machine.