Laptop for music - buying advice needed
- KVRAF
- Topic Starter
- 2236 posts since 23 May, 2005 from West Country, UK
I switched from MacBook Pros to a high end HP ZBook workstation early this year. Delighted with performance which is about par with my maxed out 2015 iMac. Cool enough to use on my lap.
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240
- KVRAF
- 37262 posts since 27 Jul, 2005 from Scottish Borders
I bought my i7 17" laptop from Scan. It runs cool & quiet. They even managed to squeeze a third SSD into it for me for under £2000 ...lnikj wrote: Mon Jan 21, 2019 6:01 am Thermals are always a trade off but one thing Pete Kaine at Scan convinced me of on the phone is that they go to incredible lengths with their builds to cool their computers and not to overspec where this caused problems (in their thinner model).
- KVRian
- 1075 posts since 26 Nov, 2007
"buying advice needed" how much would one charge for advice? heher
sry i had to...
perspective is a funny thing
perspective is a funny thing
"two fools dancing on the hands of time... yeah the fool and me"
Knot Hardly Productions
Knot Hardly Productions
- KVRAF
- Topic Starter
- 2236 posts since 23 May, 2005 from West Country, UK
You're ten months too late to offer your servicesMadDogE134 wrote: Sat Oct 19, 2019 7:05 pm "buying advice needed" how much would one charge for advice? hehersry i had to...
perspective is a funny thing![]()
- KVRian
- 1075 posts since 26 Nov, 2007
lol... them's the breaks lol cheers
"two fools dancing on the hands of time... yeah the fool and me"
Knot Hardly Productions
Knot Hardly Productions
- KVRian
- 709 posts since 7 May, 2002 from Phoenix, Arizona, USA
I'm looking for what would be the most capable low latency/live performance system (non desktop). Would like the headroom to run many effects on live audio. So far my deduction has come to the MSI GT76 Titan (and it IS relatively large and quite heavy) with a 9900k, due to (what I can deduce) the apparently superior cooling system (over the Alienware Area 51m or Clevo P750TM1, other 9900k desktop replacement class). The implication being that better cooling would allow higher sustained CPU speeds.
Another hypothetical is if I'm reconciled with the size and weight of the above, just a little more size allowance and instead I could perhaps build a slim size mini-itx 9900k. Comparing dimensions of the gt76, an example of a slim style mini-itx case is only 1 inch wider and about 3 inches thicker.
https://www.silverstonetek.com/raven...&area=en&top=C
15.04" (W) x 4.13" (H) x 14.33" (D)
On the other hand, to go for a smaller size, this i9 nuc looks interesting, coming next year supposedly, but the cooling looks comparatively basic. Would want to wait for some reports about its effectiveness. https://www.tomshardware.com/news/in...ost-canyon-nuc
For audio interface, so far I've come to the Presonus Quantum, due to wanting 8 pre amps in a single rack (I like RME, but they don't have a single rack with 8 pres, and Antelope's reports/reputation is quite discouraging (looked at the Discrete 8) ).
Thanks for any thoughts!
Another hypothetical is if I'm reconciled with the size and weight of the above, just a little more size allowance and instead I could perhaps build a slim size mini-itx 9900k. Comparing dimensions of the gt76, an example of a slim style mini-itx case is only 1 inch wider and about 3 inches thicker.
https://www.silverstonetek.com/raven...&area=en&top=C
15.04" (W) x 4.13" (H) x 14.33" (D)
On the other hand, to go for a smaller size, this i9 nuc looks interesting, coming next year supposedly, but the cooling looks comparatively basic. Would want to wait for some reports about its effectiveness. https://www.tomshardware.com/news/in...ost-canyon-nuc
For audio interface, so far I've come to the Presonus Quantum, due to wanting 8 pre amps in a single rack (I like RME, but they don't have a single rack with 8 pres, and Antelope's reports/reputation is quite discouraging (looked at the Discrete 8) ).
Thanks for any thoughts!
Last edited by ericzang on Wed Oct 23, 2019 1:24 pm, edited 2 times in total.
- GRRRRRRR!
- 17820 posts since 14 Jun, 2001 from Somewhere you're not!
Why do you need so much grunt? We can get by with a two year old Core i5 on stage. I put a lot more strain on my system doing studio work. The thing witha NUC is you'll need a monitor, which would be annoying on stage.
Last edited by BONES on Thu Oct 24, 2019 2:01 am, edited 1 time in total.
NOVAkILL : Legion GO, AMD Z1x, 16GB RAM, Win11 | Audient EVO 8 | Lumi Keys | Studio Pro 8
Korg Odyssey, bx-oberhausen, Proxima, PolyMax, GR8, JP6K, Union, Atomika,
Invader 2, Flow Motion, Olga, TRK 01, Thorn, Spire, VG Iron
Korg Odyssey, bx-oberhausen, Proxima, PolyMax, GR8, JP6K, Union, Atomika,
Invader 2, Flow Motion, Olga, TRK 01, Thorn, Spire, VG Iron
- KVRian
- 709 posts since 7 May, 2002 from Phoenix, Arizona, USA
I'd like to run several channels of live mics/instruments, monitoring at lowest latency possible (RTL round trip latency of about 8ms or less), while be able to run elaborate configurations of effects. A couple vsti-s, but probably nothing too heavy there.
True, I'd like to be able to test a more typical higher end laptop to see if that's enough (the size and weight advantage would be nice), but seems like higher cpu speeds will allow for more freedom with the above scenario. My friend has a recent mac mini (i7 something 3.2ghz) and with his fairly elaborate set in Ableton, he's about at the limit.
Right about the NUC, although I'm considering checking out Usine as a host, which if I understand correctly, looks like it has a mode that can be setup as a touchscreen with customized controls, so I'd use a screen as another controller.
Thanks for the reply!
True, I'd like to be able to test a more typical higher end laptop to see if that's enough (the size and weight advantage would be nice), but seems like higher cpu speeds will allow for more freedom with the above scenario. My friend has a recent mac mini (i7 something 3.2ghz) and with his fairly elaborate set in Ableton, he's about at the limit.
Right about the NUC, although I'm considering checking out Usine as a host, which if I understand correctly, looks like it has a mode that can be setup as a touchscreen with customized controls, so I'd use a screen as another controller.
Thanks for the reply!
- GRRRRRRR!
- 17820 posts since 14 Jun, 2001 from Somewhere you're not!
I don't think it will be a problem. It doesn't sound like what you want to do will put much strain on your CPU, even at low latency. Bandwidth is more likely to be an issue, so an audio I/O device that takes full advantage of USB 3 or Thunderbolt might be a better way to spend your money.
NOVAkILL : Legion GO, AMD Z1x, 16GB RAM, Win11 | Audient EVO 8 | Lumi Keys | Studio Pro 8
Korg Odyssey, bx-oberhausen, Proxima, PolyMax, GR8, JP6K, Union, Atomika,
Invader 2, Flow Motion, Olga, TRK 01, Thorn, Spire, VG Iron
Korg Odyssey, bx-oberhausen, Proxima, PolyMax, GR8, JP6K, Union, Atomika,
Invader 2, Flow Motion, Olga, TRK 01, Thorn, Spire, VG Iron
- KVRian
- 709 posts since 7 May, 2002 from Phoenix, Arizona, USA