Oh, a legacy bug, I see
DUNE 3 is now available!!
- KVRAF
- 18434 posts since 16 Sep, 2001 from Las Vegas,USA
Then you'd be looking at one area while trying to move a control in another area. Not very efficient.e-crooner wrote: ↑Tue Nov 12, 2019 7:14 pm Unless the value is displayed somewhere else, say, in a dedicated value display under the big display. I.e. moving "Synapse Dune 3" (where is the "Audio" in that?) to the top where it currently says "Differential Unison Engine" (who cares what Dune stands for), which is deleted.
Since the display would be wider, it could display more precise values (3 or 4 digits).
If your mouse cursor is already over a control that you want to see the value of Left Click is almost no work at all.
Now you left click, see the value and if you want to adjust it then you're ready to go.
None are so hopelessly enslaved as those who falsely believe they are free. Johann Wolfgang von Goethe
- KVRist
- 179 posts since 14 Jul, 2019
- Banned
- 3564 posts since 22 Aug, 2019
-
- KVRist
- 316 posts since 30 Nov, 2007
Nice Pad !!e-crooner wrote: ↑Thu Nov 14, 2019 12:21 amA Brazilian pad with shimmer reverb...
https://app.box.com/s/k6odke6zmbb75eocaa7pj024uxqz62ow
- KVRist
- 414 posts since 21 Jan, 2007
Do you use the Pluginboutique/Loopmasters version of Zampler? that one crashes like crazy. the Beat version never crashed on me.Elektronisch wrote: ↑Tue Nov 05, 2019 6:32 pmactually thats an awesome suggestion/feature request because Zampler//RX is broken and always crashes.MutantHero wrote: ↑Tue Nov 05, 2019 6:20 pm Also will you make a legit SFZ creation utility to go along with Zampler//RX please? Sorely needed. Nice engine and GUI there.
also, protip: if you want to make a sample loop in Zampler, you have to set the loop points in a WAV editor and presto! you now have sustain
- KVRAF
- 18434 posts since 16 Sep, 2001 from Las Vegas,USA
I know Dune's interface inside and out as I approach 500 patches I've done.
That's why I don't need readouts that pop up willy nilly when you move your cursor around the GUI or parameter readouts that are not attached to the Parameter. In fact I rarely use the readouts at all for many of the parameters. I can see an ADSR envelope shape by simply looking at the position of the knob pointers. Same for Cutoff and Res etc....
None are so hopelessly enslaved as those who falsely believe they are free. Johann Wolfgang von Goethe
- Banned
- 3564 posts since 22 Aug, 2019
Readouts don't pop up willy nillyTeksonik wrote: ↑Thu Nov 14, 2019 1:05 pmI know Dune's interface inside and out as I approach 500 patches I've done.
That's why I don't need readouts that pop up willy nilly when you move your cursor around the GUI or parameter readouts that are not attached to the Parameter. In fact I rarely use the readouts at all for many of the parameters. I can see an ADSR envelope shape by simply looking at the position of the knob pointers. Same for Cutoff and Res etc....
A separate value readout display is pretty much standard, for instance with U-he, Tal and Air synths.
Since you mention it, the envelopes are one of the things I don't like about Dune, I prefer sliders, they are more visually intuitive in my view.
- KVRAF
- 18434 posts since 16 Sep, 2001 from Las Vegas,USA
They would if they popped up on mouse over rather than on left click as you propose.
If you own Sektor you'll know what you mean.
I don't care one bit what is "standard". In my opinion having the parameter readout attached to the parameter you're focusing on is far more efficient. I own Hive 2, Diva, and several Air synths and I find Dune 3's method far superior.
But make it a feature request and see what happens. You never know what updates will contain.
Personally I hope Synapse doesn't waste a second on changing the readout system but good luck with your request.
None are so hopelessly enslaved as those who falsely believe they are free. Johann Wolfgang von Goethe
-
- KVRist
- 360 posts since 26 Oct, 2018
I like Uhe synths, and have tested out just about every synth in the "what synth..." or "___ vs ___" threads, and have only really clicked with Zebra and Hive. Have used DuneCM for random sounds, which I bounce then delete the synth from project. Recently tried out Dune3 and fell in love with it. It's weird, I don't like the workflow as much as Zebra and Hive, but for some reason, the different workflow leads me to try stuff in a different way and have made a few sweet patches. Also, never knew I needed two arpeggiators within a synth Dune3 is sick. I'm fairly certain I won't ever need another synth ever again. Hive2/Zebra2/Dune3 is the holy trinity for me
Last edited by Butwug on Fri Nov 15, 2019 5:43 am, edited 1 time in total.
-
- Banned
- 3889 posts since 3 Feb, 2010
Unfortunetly both versions crash to meoverhishead wrote: ↑Thu Nov 14, 2019 12:38 pmDo you use the Pluginboutique/Loopmasters version of Zampler? that one crashes like crazy. the Beat version never crashed on me.Elektronisch wrote: ↑Tue Nov 05, 2019 6:32 pmactually thats an awesome suggestion/feature request because Zampler//RX is broken and always crashes.MutantHero wrote: ↑Tue Nov 05, 2019 6:20 pm Also will you make a legit SFZ creation utility to go along with Zampler//RX please? Sorely needed. Nice engine and GUI there.
also, protip: if you want to make a sample loop in Zampler, you have to set the loop points in a WAV editor and presto! you now have sustain
thanks for the tip! id use it if Zampler wouldnt crash its funny tho, ever since i tried zampler few years ago it always crashed since then, never had a proper uncrashing expierience
- Banned
- 10732 posts since 17 Nov, 2015
- Banned
- 3564 posts since 22 Aug, 2019
Well, if readouts pop up willy nilly in the global display on mouse over, I find that useful. I think it is perfect in Sylenth1, although the readout in the display is a bit too small. I love the big readout on Tal synths.Teksonik wrote: ↑Fri Nov 15, 2019 3:41 amThey would if they popped up on mouse over rather than on left click as you propose.
If you own Sektor you'll know what you mean.
I don't care one bit what is "standard". In my opinion having the parameter readout attached to the parameter you're focusing on is far more efficient. I own Hive 2, Diva, and several Air synths and I find Dune 3's method far superior.
But make it a feature request and see what happens. You never know what updates will contain.
Personally I hope Synapse doesn't waste a second on changing the readout system but good luck with your request.
At least the readout is in blue numbers on the light skin, that's easier to notice than on the dark skin.
No, don't worry, it won't be a feature request on my part.