INSTINCT 1.0 Released | Inertia Sound Systems

[U-o]

Does not work on my PC, Win10, 64bit, FL Studio latest version... CPU goes to 96% in empty project and freezes my PC. Any ideas? Missing something?

Instinct is the only plugin impressed me during Black Friday sale.

[bobsled]

Never mind. Email and website make it seem like one needs to manually enter device ID. I now see that it is done automatically.

Perhaps it would be helpful if the email does not link directly to a page asking for device ID to generate a key but instead linked to the support page several clicks away that describes the actual process to generate the key.

[InertiaSoundSystems]

Does not work on my PC, Win10, 64bit, FL Studio latest version... CPU goes to 96% in empty project and freezes my PC. Any ideas? Missing something?

Instinct is the only plugin impressed me during Black Friday sale.

Hello there, if you are in FLStudio try this :

https://www.inertiasoundsystems.com/sup ... informats/

we hope this solves the issue!

[U-o]

I'm not able to change the settings for this plugin, because it immediatelly freezes my DAW when I put it in mixer channel. Such a shame!

[InertiaSoundSystems]

I'm not able to change the settings for this plugin, because it immediatelly freezes my DAW when I put it in mixer channel. Such a shame!

This can be solved if you go to FLStudio Audio Settings, and for the input / output select "none".
This will stop the audio engine. Then you can load the plugin and apply the steps described earlier, without any CPU usage at all.
After that you can select the input / output device you're using to re enable the FLStudio engine.

[GilJ]

Hi,
I grief the demo and was quite impressed by the sound/dynamics : really good work !

I already have a couple of distorsion unit, like Ohmicide, Predathom, NI Driver, Trash 2 etc., but I'm really thinking if getting Instinct
I would like to know if you have planned to do a resizable GUI, please ? (And eventually an autogain compensation function ?)

Cheers,
GilJ.

[U-o]

I'm not able to change the settings for this plugin, because it immediatelly freezes my DAW when I put it in mixer channel. Such a shame!

This can be solved if you go to FLStudio Audio Settings, and for the input / output select "none".
This will stop the audio engine. Then you can load the plugin and apply the steps described earlier, without any CPU usage at all.
After that you can select the input / output device you're using to re enable the FLStudio engine.

Yes, now it works! Thanks for help. Really nice plugin, I like it a lot even if it uses 10% CPU.

[InertiaSoundSystems]

Hi,
I grief the demo and was quite impressed by the sound/dynamics : really good work !

I already have a couple of distorsion unit, like Ohmicide, Predathom, NI Driver, Trash 2 etc., but I'm really thinking if getting Instinct
I would like to know if you have planned to do a resizable GUI, please ? (And eventually an autogain compensation function ?)

Cheers,
GilJ.

Yes we do. Not in the very short future, but we really do want to have a resizable gui for our plugins. We are planning to introduce this feature for Granulizer 3 first, and to expand that to instinct and any future inertia plugins.

Now about autogain we can, for sure, start a discussion via inertia support email . we really appreciate users' feedback, as we find very useful to expand to directions parallel to our audience!
Cheers!

[InertiaSoundSystems]

I'm not able to change the settings for this plugin, because it immediatelly freezes my DAW when I put it in mixer channel. Such a shame!

This can be solved if you go to FLStudio Audio Settings, and for the input / output select "none".
This will stop the audio engine. Then you can load the plugin and apply the steps described earlier, without any CPU usage at all.
After that you can select the input / output device you're using to re enable the FLStudio engine.

Yes, now it works! Thanks for help. Really nice plugin, I like it a lot even if it uses 10% CPU.

We are really happy we helped you with this. and that you like it

[GilJ]

Hi,
I grief the demo and was quite impressed by the sound/dynamics : really good work !

I already have a couple of distorsion unit, like Ohmicide, Predathom, NI Driver, Trash 2 etc., but I'm really thinking if getting Instinct
I would like to know if you have planned to do a resizable GUI, please ? (And eventually an autogain compensation function ?)

Cheers,
GilJ.

Yes we do. Not in the very short future, but we really do want to have a resizable gui for our plugins. We are planning to introduce this feature for Granulizer 3 first, and to expand that to instinct and any future inertia plugins.

Now about autogain we can, for sure, start a discussion via inertia support email . we really appreciate users' feedback, as we find very useful to expand to directions parallel to our audience!
Cheers!

Hi,

I liked the anwer... so I bought the plugin
Ok, I'll send an email to support for some feature requests after having spent a couple of hours more with Instinct (but I think that it will be cool also to discuss about more FRs with the KVRers here ) !

All the best,
GilJ.

[InertiaSoundSystems]

Hi,
I grief the demo and was quite impressed by the sound/dynamics : really good work !

I already have a couple of distorsion unit, like Ohmicide, Predathom, NI Driver, Trash 2 etc., but I'm really thinking if getting Instinct
I would like to know if you have planned to do a resizable GUI, please ? (And eventually an autogain compensation function ?)

Cheers,
GilJ.

Yes we do. Not in the very short future, but we really do want to have a resizable gui for our plugins. We are planning to introduce this feature for Granulizer 3 first, and to expand that to instinct and any future inertia plugins.

Now about autogain we can, for sure, start a discussion via inertia support email . we really appreciate users' feedback, as we find very useful to expand to directions parallel to our audience!
Cheers!

Hi,

I liked the anwer... so I bought the plugin
Ok, I'll send an email to support for some feature requests after having spent a couple of hours more with Instinct (but I think that it will be cool also to discuss about more FRs with the KVRers here ) !

All the best,
GilJ.

Sure, please do!

[InertiaSoundSystems]

Hello All,
We are happy to announce that INSTINCT has been updated to v 1.0.1

As we did for GRANULIZER 2.3, Linux support has been added for INSTINCT as well. A VST/VST3 experimental version available for download!

A section will be added about known issues, but feel free to reach out to us if you want to support our effort in making Linux a first class citizen.


Summarizing version 1.0.1 adds:

• Experimental Linux Support
• CPU optimizations
• Smoother knob interactions
• Official macOS 10.15 (Catalina) support

INSTINCT will be offered at a 50% discount price until October 6th!
You can find INSTINCT here: https://www.inertiasoundsystems.com/sto ... /instinct/

Cheers!

[nordickvr]

Hi and thank you for the update but, here's the message I'm having when launching the Instinst_1.0.1.dmg installer (there's a typo, no?):
Instinst_1.0.1.dmg installer image not recognized
OS X 10.13.6 (HS)

[InertiaSoundSystems]

Hi and thank you for the update but, here's the message I'm having when launching the Instinst_1.0.1.dmg installer (there's a typo, no?):
Instinst_1.0.1.dmg installer image not recognized
OS X 10.13.6 (HS)

We have fixed the issue, you can try to re-download. Let us know if everything worked for you ok.
Thank you for the feedback!

[ahanysz]

Experimental Linux Support

Great to see! Unfortunately I've not yet been able to get it working.

I've downloaded the demo version and run Install.sh, and I can see a file ~/.vst/Instinct.so in the same folder as my other VSTs, but Reaper simply doesn't see it. I've tried restarting Reaper and rescanning the VST folders. Any other suggestions?

(Using Reaper 6.08 on Ubuntu 18.04.)