Arturia Xmas Gift Reverb PLATE-140

VST, AU, AAX, CLAP, etc. Plugin Virtual Effects Discussion
Post Reply New Topic
RELATED
PRODUCTS

Post

Just got it registered. Cool plugin :)
Thanks Arturia

Post

Two in my account, none activated. Downloaded fine yesterday but apparently it was a demo (without being obvious about it, other than throwing errors on shutdown).

I can get to the website fine now but ASC is having issues. I was going to do offline activation, but in the middle of that process ASC decided it was synchronizing licenses. For 10 minutes. And then it showed me an Activate button I could press... only to go back to Synchronizing for... some amount of time and then failing. And then logging me out again :dog:

Oh, now it's bouncing back and forth every few minutes between the "Synchronization" thing and telling me it's activating the plugin. I guess I'll just let it keep running until something actually happens?

Post

Mine was registered and activated before I even downloaded it. :o
I don't even know what happened.
I let it run while I was doing other things.

Post

4damind wrote: Thu Dec 19, 2019 12:02 am Decay time can only be set with the up/down button?
With a meta/macro host like MUX, Bitwig, KV_Element, etc... you can get a knob for it. In VST though, there's no easier way from what I can tell.

Still waiting on my activation too, but I'm not going to complain about a freebie. I'm sure their servers are hammered right now.

It's actually a surprisingly good plate emulation. I'll have to make some videos on it once I can get it activated
Software portfolio
M.N.I.E - soon to be my musical portfolio
Hey, I'm Eurydice(Izzy for short) - she/her :hug:

Post

> now it's bouncing back and forth every few minutes between the "Synchronization" thing

yes, exactly the same behaviour here
finally, after 3 hours, it said activated but began bouncing again...
in logic i could open revPlate but it said it needed to be activated (????)

i was considering buying Pigments, but with this ASC unsecuity.....

Post

Butwug wrote: Wed Dec 18, 2019 8:32 pm
Russell Grand wrote: Wed Dec 18, 2019 8:24 pm
Butwug wrote: Wed Dec 18, 2019 7:44 pm Finally managed to download it. Installed it. Took 3 minutes to load. Another 5 to input name an password as it would freeze after 2 or 3 letters. Took a couple more minutes to reach servers and get out of demo mode. Loaded it, crashed my DAW, then gave error about not being able to save the state of the plugin. I was sort of stoked for this freebie but I’m not sure I can trust this plugin on projects.
robotmonkey wrote: Wed Dec 18, 2019 7:04 pm Registered it to my account but is it worth downloading and messing around with Arturia Software Center or whatever it is called?
Not worth it
I disagree. A stable (on my machine), high quality reverb for $0? Totally worth it.
He was asking if it is worth downloading the Arturia Software Center, not the plugin.
I was speaking of the plugin and the Software Center being worth it. :wink:

(edit: But I didn't make that clear in my original post, did I? :oops: )
Last edited by Russell Grand on Thu Dec 19, 2019 2:06 am, edited 1 time in total.

Post

MadDogE134 wrote: Wed Dec 18, 2019 8:39 pm either way it still has to be activated by ASC
Yep.

Post

Really cool plugin soundwise, but I'm not a fan of the cheap home made chipboard instrument panel design. Would have preferred some additional alternate and more polished skins to pick from.

Login in, registering, updating, and installing went like a breeze... :)
KVR S1-Thread | The Intrancersonic-Design Source > Program Resource | Studio One Resource | Music Gallery | 2D / 3D Sci-fi Art | GUI Projects | Animations | Photography | Film Docs | 80's Cartoons | Games | Music Hardware |

Post

just finished playing around with this. i think it sounds better than the NI Raum. Just my opinion.
🌐 Spotify 🔵 Soundcloud 🌀 Soundclick

Gear & Setup: Windows 10, Dual Xeon, 32GB RAM, Cubase 10.5/9.5, NI Komplete Audio 6, NI Maschine, NI Jam, NI Kontakt

Post

telecode wrote: Thu Dec 19, 2019 3:05 am just finished playing around with this. i think it sounds better than the NI Raum. Just my opinion.

I got them both too. After just a quick run through both of them, I was drawn more towards Raum.
Just a first impression though, and not a solid decision.
But hey - they were both free - merry x-mas. :party: I'm not going to look a gift horse in the mouth.

Post

telecode wrote: Thu Dec 19, 2019 3:05 am just finished playing around with this. i think it sounds better than the NI Raum. Just my opinion.
It’s still early days but I think they’re very different. RAUM is better for creative sound design and making huge soundscapes. It’s maybe closer to a Strymon BigSky or Eventide Blackhole. And this is better for any source you’d traditionally use a plate reverb such as on snares. The drive control on it just sounds insane when used on drums.
Last edited by v1o on Thu Dec 19, 2019 3:58 am, edited 2 times in total.
Orion Platinum, Muzys 2

Post

felis wrote: Thu Dec 19, 2019 3:48 am
telecode wrote: Thu Dec 19, 2019 3:05 am just finished playing around with this. i think it sounds better than the NI Raum. Just my opinion.

I got them both too. After just a quick run through both of them, I was drawn more towards Raum.
Just a first impression though, and not a solid decision.
But hey - they were both free - merry x-mas. :party: I'm not going to look a gift horse in the mouth.
I think we shouldn't choose between both because they're different to begin with:
Raum is for digital and big spaces.
Plate-140 is for more organic and saturated sounds.

Post

People keep mentioning Raum but they forget Acon Verberate Basic. Don’t sleep on Verberate Basic it’s excellent.
Orion Platinum, Muzys 2

Post

Russell Grand wrote: Thu Dec 19, 2019 2:03 am
Butwug wrote: Wed Dec 18, 2019 8:32 pm
Russell Grand wrote: Wed Dec 18, 2019 8:24 pm
Butwug wrote: Wed Dec 18, 2019 7:44 pm Finally managed to download it. Installed it. Took 3 minutes to load. Another 5 to input name an password as it would freeze after 2 or 3 letters. Took a couple more minutes to reach servers and get out of demo mode. Loaded it, crashed my DAW, then gave error about not being able to save the state of the plugin. I was sort of stoked for this freebie but I’m not sure I can trust this plugin on projects.
robotmonkey wrote: Wed Dec 18, 2019 7:04 pm Registered it to my account but is it worth downloading and messing around with Arturia Software Center or whatever it is called?
Not worth it
I disagree. A stable (on my machine), high quality reverb for $0? Totally worth it.
He was asking if it is worth downloading the Arturia Software Center, not the plugin.
I was speaking of the plugin and the Software Center being worth it. :wink:

(edit: But I didn't make that clear in my original post, did I? :oops: )
The way it’s worded makes Arturia Software Center the subject of it being worth it or not. That sentence is a compound sentence with “Registered it (the plugin) to my account” being an independent clause and “but is it worth downloading and messing around with Arturia Software Center or whatever it is called?” being the other independent clause. If you say “it” in “but is [it] worth downloading” means the plugin, then that means “but is it worth downloading” is dependent on “registered it to my account.” This leaves “messing around with Arturia Software Center or whatever it is called?” by itself which is a sentence fragment. This lead me to assume that a proper sentence was written and you meant the arturia center software being worth it. But I was wrong to assume and speak on your behalf I suppose.

With that said, I wonder if me downloading the vst and activating it without ASC had anything to do with it being glitchy. From what Ive read here you guys say you need to download ASC but I just downloaded the reverb vst from my profile and used installer. Once reverb plug loaded on DAW, logged in from vst when it finally opened, which also took forever to load, then crashed DAW. To be honest I wasnt paying much attention to what the hell was going on. Every web page took minutes to load so kept working on a project.

Post

I let it sit there for 4 hours while it tried to activate and it looked like it still didn't do it... just killed ASC and restarted it and it immediately said it activated. And the plugin works fine now.

Post Reply

Return to “Effects”