XSRDO Analogy Official Release
-
- KVRer
- 4 posts since 18 Jan, 2020
Hi Kirsty
I've been having fun with the 32-bit version of Analogy, and
since I'm using Reason 10 as my DAW, I've been looking forward
to the 64-bit version. Reason only accepts v.2.4, 64-bit VST's.
The 64-bit version (v0.96) loads in Reason, but when I open the
GUI, it only gives me a closed, non-resizable window.
It can play the default preset, but since there is no GUI, I can
not change presets or create my own.
I have tried to place the plugin on these paths:
C:\Test\VSTPlugins\
C:\Program Files\VSTPlugins\
But the problem persists
I hope it can be fixed, but anyway, thank you for a brilliant
and generous project!
Best regards
Kurt
I've been having fun with the 32-bit version of Analogy, and
since I'm using Reason 10 as my DAW, I've been looking forward
to the 64-bit version. Reason only accepts v.2.4, 64-bit VST's.
The 64-bit version (v0.96) loads in Reason, but when I open the
GUI, it only gives me a closed, non-resizable window.
It can play the default preset, but since there is no GUI, I can
not change presets or create my own.
I have tried to place the plugin on these paths:
C:\Test\VSTPlugins\
C:\Program Files\VSTPlugins\
But the problem persists
I hope it can be fixed, but anyway, thank you for a brilliant
and generous project!
Best regards
Kurt
-
- KVRist
- Topic Starter
- 486 posts since 21 Nov, 2012 from Sitting in front of my PC
Yes.
You can put the Analogy.dll and any saved presets/banks anywhere on your hard drive.
Currently it only looks for its config.txt and user skin etc... files in:-
C:/Vst/Plugins
C:/Program Files/VSTPlugins
C:/Program Files/Steinberg/VSTPlugins
C:/Program Files/Common Files/VST2
In fact Analogy can run alone without any of the extra stuff, but with limited options.
Kirsty
-
- KVRist
- Topic Starter
- 486 posts since 21 Nov, 2012 from Sitting in front of my PC
You can put the plugin anywhere. Sorry it wont run in Reasonkhm wrote: ↑Sat Jan 18, 2020 7:14 pm Hi Kirsty
I've been having fun with the 32-bit version of Analogy, and
since I'm using Reason 10 as my DAW, I've been looking forward
to the 64-bit version. Reason only accepts v.2.4, 64-bit VST's.
The 64-bit version (v0.96) loads in Reason, but when I open the
GUI, it only gives me a closed, non-resizable window.
It can play the default preset, but since there is no GUI, I can
not change presets or create my own.
I have tried to place the plugin on these paths:
C:\Test\VSTPlugins\
C:\Program Files\VSTPlugins\
But the problem persists
I hope it can be fixed, but anyway, thank you for a brilliant
and generous project!
Best regards
Kurt
I looked at there website to try the demo but the specs say it's 4GB + 8GB for extra stuff and I just can't
afford to use up that much disk space on my already stuffed 240GB SSD for a demo.
Would you be able to try another DAW. The 64bit versions of MuLabs (31MB) and Reaper (13MB) both work for me.
Kirsty
-
- KVRer
- 4 posts since 18 Jan, 2020
Hi again
Thank you for your fast response!
I have tried it in other VST hosts (VSTHost, Element) and it works,
so it could be a Reason issue? I have actually considered Reaper as
my second DAW, and I have no doubt that it will work there, so I
can use it in many other ways than directly in Reason
And yes, Reason is huge when you install the whole package, so don't.
I will of course be testing new versions in Reason, and if it works
I will let you know. Also, if you have anything for me to test in
Reason, I will only be too happy to do so
Best regards
Kurt
Thank you for your fast response!
I have tried it in other VST hosts (VSTHost, Element) and it works,
so it could be a Reason issue? I have actually considered Reaper as
my second DAW, and I have no doubt that it will work there, so I
can use it in many other ways than directly in Reason
And yes, Reason is huge when you install the whole package, so don't.
I will of course be testing new versions in Reason, and if it works
I will let you know. Also, if you have anything for me to test in
Reason, I will only be too happy to do so
Best regards
Kurt
-
- KVRist
- Topic Starter
- 486 posts since 21 Nov, 2012 from Sitting in front of my PC
So I'm currently working on a dynamically resizeable window for Analogy and am up to 4K (3840 x 2160).
Do you think I need to support higher resolutions or is that enough
Kirsty
Do you think I need to support higher resolutions or is that enough
Kirsty
-
- KVRist
- 128 posts since 7 Mar, 2004 from France
Hi . I still use 32 bits version v1.2 and made some presets for test, available : https://drive.google.com/open?id=1INiPE ... RLjPN8v79q
But, police size is too small !
But, police size is too small !
-
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
There is no 32bit version anymore?
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRist
- 128 posts since 7 Mar, 2004 from France
Hi Kirsty. I tested 64bits version , but don't work in "Studio one" when I load/open plugin, there's a "short parazit noise" , then i've sound but can't move no knobs ! and CPU angry ! (..disappointad because the GUI better than 32bits version ) 
when I load/open plugin, there's a "short parazit noise" , then i've sound but can't move no knobs ! and CPU angry ! (..disappointad because the GUI better than 32bits version ) -
- KVRist
- Topic Starter
- 486 posts since 21 Nov, 2012 from Sitting in front of my PC
The old 32bit download is still on my blog page but no longer updated/supported.
Kirsty
Last edited by kirsty roland on Fri Feb 21, 2020 11:11 am, edited 1 time in total.
-
- KVRist
- Topic Starter
- 486 posts since 21 Nov, 2012 from Sitting in front of my PC
As it works OK in other hosts, it must be an issue with Studio One.
I've had a look at the Presonus website and see that Studio One 4 Prime is free, providing I sign up to
a presonus account and download a 1GB DAW file, but I'm not prepared to do that just to test it out as
I've only got 14GB left on my already stuffed SSD.
Sorry I've been a bit slow lately. I've got a bad cold and chest infection (doc's got me on antibiotics) so
I've not done much programming lately, however, I'm getting ready to release an v0.970 update soon.
Regards
Kirsty
-
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
Ok thankskirsty roland wrote: ↑Fri Feb 21, 2020 10:56 amThe old 32bit download is still on my blog page but no longer updated/supported.
Kirsty
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRer
- 2 posts since 27 Mar, 2006
Hi there, I checked out the plugin, and it is very nice... sounds great,
I am using the 64 bit version, (Win 10), and I am having GUI issues in both Orion and Cubase. The GUI is "frozen" and does not move. I can click and get the menu, and I can change presets (though the presetname does not update in the GUI )
I read above that it is working in some DAW, and not in others...
Looking forward to seeing if this is a fixable, as I really like the possibilities of this synth..
Cheers, and all the best... nice work
I am using the 64 bit version, (Win 10), and I am having GUI issues in both Orion and Cubase. The GUI is "frozen" and does not move. I can click and get the menu, and I can change presets (though the presetname does not update in the GUI )
I read above that it is working in some DAW, and not in others...
Looking forward to seeing if this is a fixable, as I really like the possibilities of this synth..
Cheers, and all the best... nice work
-
- KVRist
- Topic Starter
- 486 posts since 21 Nov, 2012 from Sitting in front of my PC
Updated to v0.970
New features include:-
Improved user interface
Faster internal code
Re-Skinable GUI
Re-Sizable GUI
Put the plugin and skin folder in any place on your hard drive with the new Custom Install.exe program
+ other stuff
Modifications include:-
Altered the way the mouse interacts with the modules for a better user experience.
Read the Setup and Help Guide.txt or look a Quick Help Guide.jpg about this
Resizable GUI options are...
Mini 10 columns x 6 rows (898 x 730 pixels)
Normal - 12 columns x 5 rows (1074 x 730 pixels)
Large - 15 columns x 4 rows (1338 x 730 pixels)
Huge - 20 columns x 3 rows (1778 x 730 pixels)
Stupidly Massive 30 columns x 2 rows (2658 x 730 pixels)
Huge 20x3 example... I can't show the Stupidly Massive example because my screen capture software will not grab an image spread across 2 monitors
Tested on Win7/64Bit + Orion, Reaper and MuLabs
As usual please let me know of any issues so I can improve it.
Download from my blog
Kirsty
New features include:-
Improved user interface
Faster internal code
Re-Skinable GUI
Re-Sizable GUI
Put the plugin and skin folder in any place on your hard drive with the new Custom Install.exe program
+ other stuff
Modifications include:-
Altered the way the mouse interacts with the modules for a better user experience.
Read the Setup and Help Guide.txt or look a Quick Help Guide.jpg about this
Resizable GUI options are...
Mini 10 columns x 6 rows (898 x 730 pixels)
Normal - 12 columns x 5 rows (1074 x 730 pixels)
Large - 15 columns x 4 rows (1338 x 730 pixels)
Huge - 20 columns x 3 rows (1778 x 730 pixels)
Stupidly Massive 30 columns x 2 rows (2658 x 730 pixels)
Huge 20x3 example... I can't show the Stupidly Massive example because my screen capture software will not grab an image spread across 2 monitors
Tested on Win7/64Bit + Orion, Reaper and MuLabs
As usual please let me know of any issues so I can improve it.
Download from my blog
Kirsty
You do not have the required permissions to view the files attached to this post.
