All things pedal related.
- KVRAF
- 1844 posts since 16 Jul, 2004 from Deepest Yorkshire
^ I really like the 80s RAT but never got round to buying one, as I only played bass seriously then. These days all the different ones, none of which have the original chip, do my head in and I’m loathed to spent over a ton for a modded one.
However, JHS do good things so I’d be interested to see what they did. There’s a Kinnatone mod which is based on the white rat, and that’s stupid money.
Personally, I have a modded Biyang Mouse which does me. Cost me £35 (with extra resistors/caps) and gives me a big enough nostalgia hit to not look further.
However, JHS do good things so I’d be interested to see what they did. There’s a Kinnatone mod which is based on the white rat, and that’s stupid money.
Personally, I have a modded Biyang Mouse which does me. Cost me £35 (with extra resistors/caps) and gives me a big enough nostalgia hit to not look further.
I miss MindPrint. My TRIO needs a big brother.
-
Funkybot's Evil Twin Funkybot's Evil Twin https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=116627
- KVRAF
- 11508 posts since 16 Aug, 2006
The 90's Rat uses the same chip but it's one of those things where it feels a little too noisy and brittle. I tend to keep my Rat parked in the same settings (distortion between 11 to 1 o'clock, everything else at 1 o'clock) for that particular distortion sound I like out of it, but once I start deviating too far form that, I just don't love it. It will be very interesting in hearing the modded Rat because I totally think it can be improved upon, and I'll be curious if that ends up being true with the JHS mod.
- KVRAF
- 1844 posts since 16 Jul, 2004 from Deepest Yorkshire
^ Yeah, I found there was a very narrow sweet spot, but it sounded great.
The JHS uses a NE5534 (TI) chip. I’ve never minded, and actually liked, the noise from the LM308 so I’ll stick with it.
I’d be interested to know how the JHS sounds vs your original one. Hope you like it.
The JHS uses a NE5534 (TI) chip. I’ve never minded, and actually liked, the noise from the LM308 so I’ll stick with it.
I’d be interested to know how the JHS sounds vs your original one. Hope you like it.
I miss MindPrint. My TRIO needs a big brother.
- KVRist
- 174 posts since 2 Mar, 2017
If you are into DIY you could try one of these...
https://www.stewmac.com/Pickups_and_Ele ... l_Kit.html
https://www.stewmac.com/Pickups_and_Ele ... l_Kit.html
-
- KVRian
- 685 posts since 17 Sep, 2007 from Planet Thanet
I still can't imagine touching a JHS pedal after his foulness with Devi and ROG. Yes, he apologised sort of but still...
- KVRAF
- 8978 posts since 1 Aug, 2003
I bought a used Electro Harmonix Tube Zipper yesterday.
I hadn't realized how huge it is.
12V, 2 tubes (one seems to be seated in a crooked way).
Nice fuzz, but the filter is less pronunciated than I expected.
It doesn't play nice with my b-stock Harley Benton / Joyo California Sound.
I had it connected to that pedal, and even with the Tube Zipper switched off it affects tone and volume.
I use a loop-switch thingie so I could prolly fix it by putting both in separate loops (if I had space left in those loops, that is).
I may end up simply removing the Harley Benton / Joyo California Sound from my chain of pedalboards, as I just paid for a used two notes cab M which may make it largely redundant.
I hadn't realized how huge it is.
12V, 2 tubes (one seems to be seated in a crooked way).
Nice fuzz, but the filter is less pronunciated than I expected.
It doesn't play nice with my b-stock Harley Benton / Joyo California Sound.
I had it connected to that pedal, and even with the Tube Zipper switched off it affects tone and volume.
I use a loop-switch thingie so I could prolly fix it by putting both in separate loops (if I had space left in those loops, that is).
I may end up simply removing the Harley Benton / Joyo California Sound from my chain of pedalboards, as I just paid for a used two notes cab M which may make it largely redundant.
- KVRAF
- 8978 posts since 1 Aug, 2003
- KVRAF
- 12352 posts since 7 May, 2006 from Southern California
If you have the input and drive cranked, there will be less headroom for the filter resonance to do it's thing. If you keep the input below 12 o'clock, and set the resonance between 10 o'clock and 2 (it will start to self-oscillate at 3 o'clock), with the frequency set pretty low, you should definitely hear the action of the filter as you turn up the sensitivity. The filter has a very interesting character and it behaves very strangely. With resonance set low (below 8 o'clock) it's almost like the filter frequency doesn't have any effect on the sound. But once the resonance kicks in, that filter will do some wild stuff, particularly in trill mode.
The Tube Zipper has fast become one of my favorite pedals. It has a ton of range and can do anything from normal tube drive and auto-wah, to complete FSU and self-oscillation. I just wish it had CV inputs.
- KVRAF
- 8978 posts since 1 Aug, 2003
-
- addled muppet weed
- 105768 posts since 26 Jan, 2003 from through the looking glass
im pretty sure the guy demoing it is a lego minifigure.
and a member here
what the hell is going on with the subtitles in that vid? a dead body? wtf?
also, notice your sig
only did that so you didn't think I was referring to anything in particular, just notifying you of said pedal. for jizzing on
- KVRAF
- 8978 posts since 1 Aug, 2003
That's just Rainger describing the view his pedal offers into a dystopian city:
https://youtu.be/Edfd7c9GwUs
No prob man, I didn't take it the wrong way, not at all.
As a matter of fact I'm sure it's gonna save me lots of time, whenever I feel the need to blabber I can just paste that instead.
- KVRAF
- 8978 posts since 1 Aug, 2003
I think it's a city full of electrons without any civil rights at all.
I bet Bones would use a voltage starver in front.
I bet Bones would use a voltage starver in front.
- KVRAF
- 8978 posts since 1 Aug, 2003
Thanks justin3am, it's a versatile pedal indeed, with lots of character. Brings back memories of the 1st amp I used, 35-ish years ago: an old amp that prolly needed a new tube. All this time in vst-land made me forget how noisy analog stuff can be.
- KVRAF
- 8978 posts since 1 Aug, 2003
"Sounds pretty ass - like good ass":
https://youtu.be/cfoInFpJh5c?t=150
Ola did a vid on the tc electronics Fangs too, last month.
https://youtu.be/cfoInFpJh5c?t=150
Ola did a vid on the tc electronics Fangs too, last month.
- KVRAF
- 1844 posts since 16 Jul, 2004 from Deepest Yorkshire
I talked myself into getting a compressor pedal in another thread. I already use an Art Levellar with my bass but it’s not something you can put anywhere in the chain.
Anyone got/tried a Marshall ED-1 The Compressor? It seems a bargain at £35 and I have the Guv’nor Plus pedal, so know the quality and the flashy but impractical knobs. Reviews are above average to very good too.
Anyone got/tried a Marshall ED-1 The Compressor? It seems a bargain at £35 and I have the Guv’nor Plus pedal, so know the quality and the flashy but impractical knobs. Reviews are above average to very good too.
I miss MindPrint. My TRIO needs a big brother.