KVR Audio

C-quence · Post by **C-quence** » Tue Mar 17, 2020 2:42 pm

Small feature request: Same behavior for the sends of the rack as for the volume sliders. When pressing alt-button and changing volume slider, it will apply the same volume to the other layers. It would be nice if this would work the same for the sends?

dune_rave · Post by **dune_rave** » Tue Mar 17, 2020 6:57 pm

Somehow I can't make DEXED to react to the velocity curve...
Tried in FL Studio 20.6 and Reaper 6.0 - problematic in both host.
If I change the velocity curve on dexed there's no impact at all.... while it has impact on other synths like mda epiano or sinewave synth.
I will post this at the pluginguru forum, currently waiting for their approval about my registration.
I'm on win10.
!!!EDIT : Ok, there's working, but not on each dexed preset. (there are presets, where the key vel is disabled

getdunne · Post by **getdunne** » Tue Mar 17, 2020 7:50 pm

C-quence wrote: Tue Mar 17, 2020 2:42 pm Small feature request: Same behavior for the sends of the rack as for the volume sliders. When pressing alt-button and changing volume slider, it will apply the same volume to the other layers. It would be nice if this would work the same for the sends?

Good idea. I've added that to the to-do list.

grdh20 · Post by **grdh20** » Wed Mar 18, 2020 4:42 pm

How do we know from our product list, when there are any changes to the "content" download? It isn't dated or versioned there.

getdunne · Post by **getdunne** » Thu Mar 19, 2020 2:01 pm

grdh20 wrote: Wed Mar 18, 2020 4:42 pm How do we know from our product list, when there are any changes to the "content" download? It isn't dated or versioned there.

Very good and valid question! We're working on ways to handle this automatically in future, but for now:

Note there have NOT been any recent changes to the Factory Content.

Whenever there is a change, we will:
- update the full Unify Factory Content.guru file (for new buyers)
- provide a smaller "updater" .guru file for existing users, and
- mention all this in the Change Log at https://pluginguru.net/unify/change-log.html

mrsugmad · Post by **mrsugmad** » Thu Mar 19, 2020 6:33 pm

getdunne wrote: Thu Mar 19, 2020 2:01 pm
grdh20 wrote: Wed Mar 18, 2020 4:42 pm How do we know from our product list, when there are any changes to the "content" download? It isn't dated or versioned there.
Very good and valid question! We're working on ways to handle this automatically in future, but for now:
Note there have NOT been any recent changes to the Factory Content.

Whenever there is a change, we will:
update the full Unify Factory Content.guru file (for new buyers)

provide a smaller "updater" .guru file for existing users, and

mention all this in the Change Log at https://pluginguru.net/unify/change-log.html

Thanks for the info Shane. A suggestion.
Put a link at the unify/pluginguru.com site to go to the change log. That way users don't have to add extra steps to go to pluginguru.net just to see the change log..

Regards,
Miker

grdh20 · Post by **grdh20** » Thu Mar 19, 2020 6:43 pm

mrsugmad wrote: Thu Mar 19, 2020 6:33 pm
getdunne wrote: Thu Mar 19, 2020 2:01 pm
grdh20 wrote: Wed Mar 18, 2020 4:42 pm How do we know from our product list, when there are any changes to the "content" download? It isn't dated or versioned there.
Very good and valid question! We're working on ways to handle this automatically in future, but for now:
Note there have NOT been any recent changes to the Factory Content.

Whenever there is a change, we will:
update the full Unify Factory Content.guru file (for new buyers)

provide a smaller "updater" .guru file for existing users, and

mention all this in the Change Log at https://pluginguru.net/unify/change-log.html

Thanks for the info Shane. A suggestion.
Put a link at the unify/pluginguru.com site to go to the change log. That way users don't have to add extra steps to go to pluginguru.net just to see the change log..

Regards,
Miker

I was actually also thinking the opposite. A link to download from the change log page too. Any idea when .11 will be released?

mrsugmad · Post by **mrsugmad** » Fri Mar 20, 2020 4:15 am

grdh20 wrote: Thu Mar 19, 2020 6:43 pm
mrsugmad wrote: Thu Mar 19, 2020 6:33 pm
getdunne wrote: Thu Mar 19, 2020 2:01 pm
grdh20 wrote: Wed Mar 18, 2020 4:42 pm How do we know from our product list, when there are any changes to the "content" download? It isn't dated or versioned there.
Very good and valid question! We're working on ways to handle this automatically in future, but for now:
Note there have NOT been any recent changes to the Factory Content.

Whenever there is a change, we will:
update the full Unify Factory Content.guru file (for new buyers)

provide a smaller "updater" .guru file for existing users, and

mention all this in the Change Log at https://pluginguru.net/unify/change-log.html

Thanks for the info Shane. A suggestion.
Put a link at the unify/pluginguru.com site to go to the change log. That way users don't have to add extra steps to go to pluginguru.net just to see the change log..

Regards,
Miker
I was actually also thinking the opposite. A link to download from the change log page too. Any idea when .11 will be released?

How about both?

Xenox.AFL · Post by **Xenox.AFL** » Fri Mar 20, 2020 9:19 am

Another small and last example of what you can do with Synth Motions Vol.1, drum are again from the upcoming library for Unify... Love this tool...

Frank

trusampler · Post by **trusampler** » Fri Mar 20, 2020 2:43 pm

Is it possible to integrate our hardware synths in Unify? I'd like to add my wavestate to a patch in unify,but not quite sure how to get started.

getdunne · Post by **getdunne** » Fri Mar 20, 2020 5:39 pm

grdh20 wrote: Thu Mar 19, 2020 6:43 pm Any idea when .11 will be released?

Actually it's v1.0.12 now (1.0.10 and 1.0.11 were in-house test releases), and the answer is TODAY! Should be ready in another couple of hours.

getdunne · Post by **getdunne** » Fri Mar 20, 2020 5:40 pm

trusampler wrote: Fri Mar 20, 2020 2:43 pm Is it possible to integrate our hardware synths in Unify? I'd like to add my wavestate to a patch in unify,but not quite sure how to get started.

Not YET, but the Easter Bunny may have a nice surprise for you in April...

SciFiArtMan · Post by **SciFiArtMan** » Fri Mar 20, 2020 8:34 pm

1.0.12 with new Factory Content too!

Jelly · Post by **Jelly** » Fri Mar 20, 2020 9:59 pm

<edit>
Ilio upgrade email just came through
</edit>

mrsugmad · Post by **mrsugmad** » Fri Mar 20, 2020 10:53 pm

Here's the link for Version 1.0.12 -

https://www.pluginguru.com/products/unify-standard/

Unify by PluginGuru; The next big thing?