can you get back to me via our support form including all tech details you can? OS, DAW used and so on. In this way I can try to replicate the issue and find what's causing it.
Thanks,
Luca
Audiority XenoVerb updated to v1.6 - Creative Multi Algorithm Reverb (VST2, VST3, AU, AAX, CLAP)
-
- KVRian
- Topic Starter
- 1424 posts since 15 Nov, 2005 from Italy
-
- KVRist
- 275 posts since 12 Jan, 2016
Good thing that The Abuser bug is now gone, and XenoVerb bug is so rare that it doesn't even bother me 
(Will buy your Abuser for dirty cheap if you don't need one anymore, just PM me
)
(Will buy your Abuser for dirty cheap if you don't need one anymore, just PM me
)-
- KVRist
- 437 posts since 27 Nov, 2016
Hi Luca
thankyou for the reply - 1.2 seemed ok in Cubase direct as an insert hadn't tried any others
I've just tried 1.1 - somehow I've managed to now have 1.1 and 1.2 (VST 3) installed at same time (please note with 1.2 I tested VST3 and VST) by re-installing 1.1
Unify as VST in Cubase or Reaper
Xenoverb 1.1 no issues with tail being stopped on next note played - merges into next note/reverb
Xenoverb 1.2 abrupt end of tail when next note played
I can do a video later - its very obvious sounding. I wanted to go back to 1.1 to try as I would have been surprised if not noticed before as I use Unify as a VST all the time and Xenoverb is my go to reverb
thanks - Buckster
thankyou for the reply - 1.2 seemed ok in Cubase direct as an insert hadn't tried any others
I've just tried 1.1 - somehow I've managed to now have 1.1 and 1.2 (VST 3) installed at same time (please note with 1.2 I tested VST3 and VST) by re-installing 1.1
Unify as VST in Cubase or Reaper
Xenoverb 1.1 no issues with tail being stopped on next note played - merges into next note/reverb
Xenoverb 1.2 abrupt end of tail when next note played
I can do a video later - its very obvious sounding. I wanted to go back to 1.1 to try as I would have been surprised if not noticed before as I use Unify as a VST all the time and Xenoverb is my go to reverb
thanks - Buckster
Audiority wrote: Wed Apr 22, 2020 12:11 pm @Buckster does this happens only with Unify or with other hosts too?
@yellowmix @Jopmanajop I'll check that. Does this happens in a specific moment (daw stopped, or while playing and so on)
Thanks,
Luca
-
- KVRian
- Topic Starter
- 1424 posts since 15 Nov, 2005 from Italy
-
- KVRist
- 242 posts since 26 Jul, 2019
I noticed some strange behaviour when using very short predelay times. If I move the predelay knob ever so slightly it outputs a delayed version of the wet signal about 1 sec later. The problem persists until 0,02 ms. From 0,03 ms upwards the delay disappears. I'm on Win10 and using Reaper. Here's an example of the issue:
https://drive.google.com/open?id=1LPuiV ... kCX5KkTu4z
BTW, I love the plugin.
https://drive.google.com/open?id=1LPuiV ... kCX5KkTu4z
BTW, I love the plugin.
-
- KVRian
- Topic Starter
- 1424 posts since 15 Nov, 2005 from Italy
@itanever: thanks for the video. The bug is confirmed and we are investigating what's causing it. In the meantime, I just uploaded a new version that fix a menu issue.
XenoVerb updated to v1.2.1
- FIX: Algorithm menu setting wrong value
To update download and install the demo version from the product page or from your User Area account.
Cheers,
Luca
XenoVerb updated to v1.2.1
- FIX: Algorithm menu setting wrong value
To update download and install the demo version from the product page or from your User Area account.
Cheers,
Luca
-
Winstontaneous Winstontaneous https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=98336
- KVRAF
- 2592 posts since 15 Feb, 2006 from Another Green World
Thanks for the update! I had "Mix Lock" issues with previous versions on Mac over the years, it's working fine in the latest version.
-
- KVRAF
- 2066 posts since 11 Aug, 2012 from omfr morf form romf frmo
Hi, thanks for update. Was this supposed to fix the menu choice not activating? I find the situation to not happen as often but it is still happening.Audiority wrote: Sat May 16, 2020 3:22 pm XenoVerb updated to v1.2.1
- FIX: Algorithm menu setting wrong value
You do not have the required permissions to view the files attached to this post.
-
- KVRian
- Topic Starter
- 1424 posts since 15 Nov, 2005 from Italy
-
- KVRAF
- 1893 posts since 9 Jul, 2014 from UK
Just did a quick check on the latest version and can confirm same behaviour here. Not a massive issue, just a bit annoying.
I wonder what happens if I press this button...
-
- KVRian
- Topic Starter
- 1424 posts since 15 Nov, 2005 from Italy
XenoVerb has been updated to v1.3
IMPORTANT: This version will require activating the plugin again. Today (Feb 9th, 2022) we are resetting all the activation slots.
Changes
- NEW: Updated Framework
- NEW: Universal 2 Binary for Apple Silicon Macs
- NEW: High Resolution GUI
- NEW: Resizable GUI
- NEW: Vector Toolbar
- NEW: Parameter value shown on display when mouse is over a knob
- FIX: Improved Licenser and Online Activation
- FIX: Wrong displayed reverb time
- FIX: Algorithm menu flickering when changing value
- FIX: LF Cut not working on Glass algorithm
- FIX: Low frequency feedback build on Shimmer algorithm when a Pitch is at 0
- FIX: Loud spike when resetting reverb tail or using Active button
- FIX: Unwanted echo when Pre Delay is at 0.01ms
- BREAKING CHANGE: Improved licenser requires a new activation
You can download the update from your User Area account.
IMPORTANT: This version will require activating the plugin again. Today (Feb 9th, 2022) we are resetting all the activation slots.
Changes
- NEW: Updated Framework
- NEW: Universal 2 Binary for Apple Silicon Macs
- NEW: High Resolution GUI
- NEW: Resizable GUI
- NEW: Vector Toolbar
- NEW: Parameter value shown on display when mouse is over a knob
- FIX: Improved Licenser and Online Activation
- FIX: Wrong displayed reverb time
- FIX: Algorithm menu flickering when changing value
- FIX: LF Cut not working on Glass algorithm
- FIX: Low frequency feedback build on Shimmer algorithm when a Pitch is at 0
- FIX: Loud spike when resetting reverb tail or using Active button
- FIX: Unwanted echo when Pre Delay is at 0.01ms
- BREAKING CHANGE: Improved licenser requires a new activation
You can download the update from your User Area account.
-
- KVRian
- Topic Starter
- 1424 posts since 15 Nov, 2005 from Italy
Just log in to your Audiority account, so you can download the new installer and a new license file. We just emailed PB to get them update the installers they provide, but it's always better to check your Audiority account.